10pcs 2S Li-ion 18650 Lithium Battery Charger Protection Board
$31.67
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. The protection board uses imported lithium polymer rechargeable battery protection IC
2. Built-in three overcurrent detection circuit (current 1, current 2, load short circuit)
3. Through the MOS tube can control the battery charge and discharge
4. Connect the terminals of the charger with high withstand voltage devices
5. Operating temperature range:negative 40 degrees to 60 degrees
6. Built-in high-precision voltage detection circuit
7. Low current consumption
Welding point Description
B + is connected to the positive side of the battery pack
MB Connect the contacts in battery 1 and battery 2
B – Connect the negative of the battery pack
P + is connected to the positive terminal (charge side / discharge side)
P-negative / negative terminal (shared with charge / discharge)
Voltage:Charging voltage:DC9V CC/CV (Max.12V)
Single-section equalization voltage:/
Current:Single-phase equalization current:/
Single section current consumption (self-consumption):≤6uA
Maximum sustained discharge current:4A
Overcharge protection:Overcharge detection voltage:4.29V
Accuracy:≤ ±0.025V
Overcharge detection delay time:1s
Overcharge detection recovery voltage:4.05V
Accuracy:≤ ±0.025V
Overdischarge protection:Overdischarge detection voltage:3V
Accuracy:≤ ±0.1V
Overdischarge detection delay time:128ms
Overdischarge detection recovery voltage:3.2V
Accuracy:≤ ±0.1V
Overcurrent protection:Overcurrent detection voltage:200mv
Accuracy:≤ ±30mv
Overcurrent detection current:9.8A
Accuracy:≤ ±3A
Overcurrent detection delay time:12ms
Recovery status:Automatic recovery
Short circuit protection:Detection status:External short circuit
Detection delay time:≤50us
Recovery status:Automatic recovery
Internal resistance:Protection circuit (MOSPET):≤21mΩ
Temperature:Working temperature range:-40~+52°C
Storage temperature range:-40~+125°C
Product Usage
2 strings of nickel cobalt manganese, lithium cobalt oxide, lithium manganese oxide rechargeable batteries
2 series lithium polymer rechargeable battery
Notice
1. During connection,pay attention to input/output voltage,load current using condition, and make sure that board power consumption will not surpass tolerance consumption
2. When connect with battery,it may not discharge;in this condition,continuous charging can let it restore to normal operating state
3. When overcharging battery and overdischarging battery are mixed up,it will become charging and overdischarging state, both of them cannot perform charging and discharging
4. Although this protection board internallt installs anti-static protection circuit, please don’t force too high static electricty on protection board
Package included
10 x 2S Li-ion 18650 Lithium Battery Charger Protection Board
Weight | 0.15 kg |
---|
Customers Also Viewed
50Pcs KW12-3 Micro Limit Switch with Roller Lever Open/Close Switch 5A 125V
$16.52Electronic Accessories & SuppliesAdd to cartFeaturesOperating temperature:-40°C to 70°CRated voltage:AC 125V-250VPer weight:2gCurrent rating:5ASize:20 x 10 x 6mm (L X W X H)PCB Terminals Circuit BoardWith Roller Lever LimitWorking principleBy external mechanical force transmission elements (by pins, buttons, levers, rollers, etc.) will be used to force action on a reed, producing reed instantaneous action when action shifted to the critical point, …
50Pcs KW12-3 Micro Limit Switch with Roller Lever Open/Close Switch 5A 125VRead More
129Pcs/Set Silicone Casting Molds and Tools Jewelry Pendant Resin Mould DIY
$20.24Lab TubesAdd to cartFeatures-This set of making tool is especially designed for DIY expoxy resin crafts, including silicone mold,spoon,sequin,drill,nails and so on.-Different silicone molds have different shapes for you to choose,which may accurately match your various needs.-It is easy control with the reliable quanlity as well as the efficence. -The superior DIY tools for your craft works.SpecificationMaterials:Silicone,MetalType:Making ToolsQuantity:129pcs,one …
129Pcs/Set Silicone Casting Molds and Tools Jewelry Pendant Resin Mould DIYRead More
12V 7.5W Polysilicon Solar Panel Battery Charger Clip for Car RV Boat Outdoor
$60.74Solar PanelAdd to cartFeatures Lightweight and convenient to carry Long span life Easy to use Suitable for 12V battery, working temperature 0-60 ℃, reflow protectionSpecificationsMaterial:Grade A monocrystalline silicon solar panelPower:7.5W maxWorking voltage:12V (rechargeable 12V battery)Current:0-625MATemperature:-60 ° CSolar panel size:310 * 190mmPacking size:330 * 205 * 30mmNotice Make sure your battery is good and bad The level of the …
12V 7.5W Polysilicon Solar Panel Battery Charger Clip for Car RV Boat OutdoorRead More
WXD3-13-2W Precision Potentiometer 470R 47K Ohm Wirewound Multi-Turn Potentiometer
$4.50Module ComponentsAdd to cartSpecificationsResistance range:47K┯Resistance tolerance:÷ 5%Rotation angle:3600 ÷ 20 Number of laps:10 lapsRated voltage:160VStarting torque:3.5 ~ 100mN.mRated power:2W (85 →) 0W (125 →)Linearity accuracy:÷ 0.3%Mechanical durability:10,000 weeksPackage included1 x Potentiometer
Mini Diving Equipment Scuba Diving Cylinder Scuba Oxygen Reserve Air Tank Set
$568.00Magnetic StirrerAdd to cartSpecificationsName:0.5L Portable Mini Oxygen Cylinder Air Oxygen Tank Breath DivingBreathing Oxygen CylinderCapacity:0.5LMaterial:Aviation aluminumOxygen cylinder weight:1040gOxygen cylinder dimension:φ6*35.5cm (2.4*14inch)Packing case size:65*10*38cm (25.6*4*15inch)Air capacity:3.0 Cu.Ft / 85 LittersMax. pressure:3000PSI / 200bar / 20MPaMax. dwell time underwater:10minNumber of underwater max. breathing:21 times(depending on individual lung capacity and depth of diving)High-pressure Inflatable PumpHigh pressure air pump material:stainless steelSize:62*26*3.6 cm(24.4*10*1.4inch)Barometer …
Mini Diving Equipment Scuba Diving Cylinder Scuba Oxygen Reserve Air Tank SetRead More
intelligent Dual LCD Pure Sine Wave Power inverter DC48V to AC220V 6000W for Home/Car/industry
$1,188.66InvertersAdd to cartSpecificationsType:Solar inverterOutput voltage waveform:Pure sine waveMatarial:Aluminum shellPower:6000WPeak Power:12000W (5000W Continous)Output voltage:220VInput voltage:48VInput DC low voltage protection:10V±0.5V DCInput DC high voltage protection:15.5V±0.5V DCOutput frequency:50Hz/60HzConversion rate:93% or moreSize:450x180x140mmWeight:8.9KG(Approx.)Appication:Home emergency/Industry/CarFeatures-High-precision circuit board.-Built-in intelligent control chip.-Dual LCD screen integration.-If the machine is abnormal, there will be an alarm.-Screw terminal. Pluggable plug, easy to replace the cable.-Universal socket, strong compatibility,most …
43.8V 1.6A Electric Bike Battery Charger for Scooter Power Supply Lithium Battery Charger
$46.56AC/DC AdaptersAdd to cartSpecificationsName:36V Lithium Battery Charger 43.8V 1.6AColor:BlackSize:155*90*50mm (6.1*3.5*2inch)Input:AC 100-240V 50-60HzOutput:DC 42V 0-2AInput plug:EU PlugOutput plug:1+, 3-Feature– This charger is suitable for all 36V lithium batteries.– Quick charge function.– Suitable for electric bicycle scooter.Package included1 x Lithium Battery Charger
Reviews
There are no reviews yet.