DC 5-28V 4-20mA LED Digital Current Signal Generator with Shell Rechargeable Handheld Analog Generator Adjustment Output Generator Module with input Voltage Reverse Connection Protection Function
$43.46
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. Easy to use, convenient wiring, knob operation, the output signal immediately output after adjusting, no delay.
2. Voltage range:the input power is DC 5-28V, suggested the power supply is DC 12-24V.
3. The protection function is perfect:with the input voltage reverse connection protection, the power reverse connect, the instrument does not work, it will not be damaged by the reverse.
4. Standard current output range:4-20mA current output can be generated by manually adjusting the potentiometer on the product, which is used for the occasion of 4-20ma output of current simulation.
5. The current regulation is very stable:the electric current is regulated by the wire-wound potentiometer, and the current is adjusted smoothly, which avoids the faults such as the resistance mutation which is often produced by the carbon film potentiometer.
6. With the current meter, display precision.
7. With dial, it can quickly locate and identify the running state of the equipment.
8. Fixed current output value:the output current can be automatically and constant at the setting point according to the customer’s adjustment, and also can be used as a constant current source, and the current output should be no more than 20MA when used as a constant current source.
9. If the test output is normal, use a multimeter(DC current ) to connect the ‘current +’ ‘current -‘terminals to show whether the values are consistent with the multimeter reading.
10. Can be used in signal source generation, valve regulation, frequency converter control, PLC debugging, instrument test, led test, analog transmitter output.
Specifications
Current:0-20mA
Size:8.5 x 7 x 4.2 cm / 3.34 x 2.75 x 1.65 inch
The output impedance matching problem of the current generator
The output signal must meet the following requirements
According to the formula:I=U/R (current = voltage divided by resistance)
So your power voltage divided by your signal internal resistance is the maximum current that your signal receiver can generate.
In addition, our current generator has some internal resistance.
So here’s the formula
Power supply voltage/(customer’s signal resistance + internal resistance of our current generator) = constant current output
Since the power supply of our module is 4-35v, the constant current generated by the module will not be sufficient if the power supply is low and the customer’s internal resistance is larger.
The signal matching requirements of our module are given below
Power supply is 24V, the signal internal resistance 1000 ┯
Power supply is 12V, the signal internal resistance 500 ┯
Power supply is 5V, the signal internal resistance 200 ┯
If the internal resistance of your signal is higher than the above parameters, it can be used to solve the problem of insufficient current supply of the constant current source by improving the power supply voltage or by reducing the internal resistance of the signal. Note that the supply voltage cannot be increased to more than 28V.
Package included
1 x 4-20mA current signal generator with shell
Weight | 0.148 kg |
---|
Customers Also Viewed
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-W
$90.79Amplifier BoardAdd to cartSpecifications– Supply Voltage:2.7v-5.5v @ 3mA current– Output:2Vpp on 1.25V bias– Frequency Response:20Hz – 20KHz– Programmable Attack and Release Ratio– Automatic gain, selectable max from 40dB, 50dB or 60dB– Low Input-Referred Noise Density of 30nV/– Low THD:0.04% (typ)– Low Power Shutdown Mode– Built-in 2V low-noise microphone bias– -40°C ~ +85°C extended temperature rangePackage included10 x Microphone …
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-WRead More
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMP
$19.04Amplifier BoardAdd to cartFeature1. The power to more than 12V current 3A2. The speaker is best to use an impedance of 4 ohms, some of the high sensitivity3. For some signal level is relatively low tone, to add the preamplifier to play the effect4. Note the positive and negative can not be reversed, use the power supplyElectrical CharacteristicsIts …
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMPRead More
Mega 2560 R3 ATmega2560-16AU Control Module without USB Cable
$44.54Motherboard & Development BoardAdd to cartDescriptionThis is compatible R3 Mega2560 ATmega2560-16AU control board without USB cableMega is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal …
Mega 2560 R3 ATmega2560-16AU Control Module without USB CableRead More
20W 420*380*3mm Folding PET Monocrystalline Silicon Solar Panel with Cable Dual USB
$93.62Smart Robot & Solar PanelAdd to cartSpecificationsMaximum Power(Pmax):20WOpen Circuit Voltage(Voc):18VMaximum Power Voltage(Vmp):12vMaximum Power Current(Imp):1.1AMaximum System Voltage(Imp):1000vOutput:USB 5V & DC 18VQuantity of cell:36Cell Effcience %:20%Output Tolerance:±10%Size:425*380*3mmStandard Test Conditions:Irradiance 1000w/m2Temoerature 25.C,AM=1.5Package Included1 x Solar panel with cable
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLC
$45.10Relay ModuleAdd to cartDescriptions– Operating Voltage:DC 5V(5V Version)– Operating Current:10-15MA– inchopeninch inchcloseinch inchMomentaryinch inchSelf-lockinginch inchInterlockinch inchDelayinch 6 Commands– Two instruction-control mode:AT command and MODBUS command– Under the AT command ,the maximum delay is 9999 seconds– Under the MODBUS command ,the maximum delay is 255 seconds– AT commands can be made serial HyperTerminal (serial assistant) Enter;– MODBUS commands can …
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLCRead More
LT1083cp 7A AC 35V Rectifier Filter Power Supply Board DIY Home theater Sound Amplifier Voltage Regulator
$24.04Power Supply ModuleAdd to cartDescriptionLT1083CP feature description (emphasis):It is a linear step-down block. Although the voltage adjustment can be adjusted from 2.5V to 37V, it is recommended that the working differential pressure is within 10V, because the power consumption is proportional to the differential pressure, the greater the differential pressure, the more heat The larger the output current, the …
Reviews
There are no reviews yet.