10V 12V 24V 36V PWM DC Controller with Positive inversion Switch PWM DC Controller for DC Motor Speed Controller 150W
$8.73
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. Connect the motor, the motor wire can be positive or negative.
2. Adjust the switch, the forward and reverse switch is used to control the direction of the motor speed. When the switch is at the zero position, the motor stops.
3. Potentiometer knob. Adjusting the potentiometer knob can change the output duty ratio of the governor and the motor speed.
Specifications
1. Input voltage requirement:10V-40VDC (wide range)
2. Output power:150W
3. Continuous current:5A, overload short circuit protection current 8A, short circuit time no more than 30 seconds
4. PWM pulse width modulation range:0%-100%
5. Size:length 74mm*width 46mm height about 27mm
according to the center distance of the mounting hole 63.5mm*36.5mm
positioning hole diameter 3.5mm
6. Weight:60 grams.
Introduction to PWM
The full name of pulse width modulation is:Pulse WidthModulator, or PWM for short. Because of its special performance, it is often used as a lamp dimming in a DC loop or a DC motor speed regulating. This circuit is a motor controller made using the principle of pulse width modulation (PWM). Using this method to control the motor speed has two advantages
1. It is mainly by changing the duty cycle of the output square wave to change the average on-time on the load from 0-100% to achieve the purpose of adjusting the brightness/speed of the load. The advantage of using pulse width modulation (PWM) to achieve dimming/speed regulation is that the energy of the power supply can be fully utilized and the efficiency of the circuit is high. For example:when the output is a 50% square wave, the power source energy consumed by the pulse width modulation (PWM) circuit is also 50%, that is, almost all energy is converted into load power output. When the common resistor step-down speed regulation is used, to make the load obtain 50% of the maximum output power of the power supply, the power supply must provide more than 71% of the output power, of which 21% is consumed by the voltage drop and heat consumption of the resistor.
2. The pulse width modulation (PWM) method can make the load get the full power supply voltage when it is working, which is beneficial to overcome the internal coil resistance of the motor and make the motor generate greater torque.
Wiring
1. Connect the power cord, ensure that the positive and negative switches are in the middle zero position, connect the DC power supply, ensure that the DC power supply voltage range is greater than 10V and less than 40V, and ensure that the output power of the power supply meets the needs of the motor. Do not connect the positive and negative terminals of the DC power supply in reverse, otherwise The governor may be damaged.
Package Inlcuded
1 x 10V 12V 24V 36V PWM DC Controller
Weight | 0.065 kg |
---|
Customers Also Viewed
10pcs DC 12V 6A 3 String Battery Protection Board Panels Solar Street Lights
$29.51Other Module BoardAdd to cartDescriptionSize:56x45x3mmContinuous working current:Within 6ACharge current:Within 6ABalance charging:YesShort circuit protection:YesFunction:Prevent overcharge, overplay, circuit protectionSuitable assembly:Nominal 3.7V electric core / three stringsPackage Included10 x 12V Battery Protection Board
10Pcs Green LED Power Symbol Momentary Latching Switch LED Light Push Button SPST
$20.86Electronic Accessories & SuppliesAdd to cart10Pcs Green LED Power Symbol Momentary Latching Switch LED Light Push Button SPSTDecriptionLatching type:Push it– on, push it again — offLED color:GreenSize(H*D):1.4 x 1cm / 0.55inch x 0.39inch (approx)Quantity:10 pcsFunction:MomentaryLED light voltage:3.2VSwitch voltage:12VMaximum operating current:20mAWith led light, with power symbol, light touch switchEasy to use and installNote1. Please check the picture and part number carefully …
10Pcs Green LED Power Symbol Momentary Latching Switch LED Light Push Button SPSTRead More
XH-M572 High-power Digital Power Amplifier Board TPA3116D2 Chassis Dedicated to Plug-in 5-28V Output 120W
$12.31Amplifier BoardAdd to cartProduct parametersProduct name:digital power amplifier boardProduct model:XR-M572Chip model:TPA3116Input voltage:DC 8-28V (24V recommended)Output resistance group:4-8┯Appearance size:83*60*25MMProduct weight:65 gramsPackage includes1 x digital power amplifier board
YouLoop Magnetic Antenna Portable Passive Magnetic Loop Antenna for HF and VHF
$39.35Other Module BoardAdd to cartSpecificationHF Response:10kHz to 30 MHzVHF Response:up to 300 MHzMaximum Power:250 mWWeight:230gFeedline Length:6m (SMA male to male)Features-Passive design-No tuning required-Low-loss wide-band BALUN with 0.28 dB loss typ.Package Included-1 x T-shaped BALUN-1 x Phase Inverter-2 x 1m RG402 Coax Loop Cable-1 x 6m RG174 Coax FeedlineNoteThis antenna is not waterproof. If it is used outdoors, please do …
YouLoop Magnetic Antenna Portable Passive Magnetic Loop Antenna for HF and VHFRead More
M5Stack ATOM Matrix PICO ESP32 Development Board Kit IMU Sensor Python
$37.17Motherboard & Development BoardAdd to cartDescriptionATOM Matrix is the most compact development board in the M5Stack development kit series yet with a size of only 24 * 24mm. It provides more GPIO pins and is very suitable for handy and miniature embedded device development. The main control adopts the ESP32-PICO-D4 chip, which comes integrated with Wi-Fi and Bluetooth technologies and …
M5Stack ATOM Matrix PICO ESP32 Development Board Kit IMU Sensor PythonRead More
5Pcs DC-DC Buck Module 6-24V 12V/24V to 5V 3A USB Step Down Power Supply Charger Efficiency 97.5%
$17.46Boost & Buck ModuleAdd to cartFeaturesThe max output current 3A, long time use 2.1A, enough useNew design, 3 solid state ceramic capacitors(MCC), more safe and low rippleSynchronous rectification, High efficiency, 6.5V to 5V 0.7A can up to 97.5%, 12V to 5V 1A can up to 94%Flat copper inductor, improve conversion efficiencyWith output overvoltage protection. There is 1.5A fuse, output 5V …
6V 180L/H Solar Power Floating Fountain Garden Landscape Water Pump 55-75cm Lifting
$36.44Electrical Pump & ValveAdd to cartSpecificationSolar panels:6V/1.4W Voltage:3.7-12 v Maximum flow rate:180L/HLift:55-75cmMaterial:monocrystalline siliconSize of the solar panel:160mmApplication scenario:outdoor, courtyardFeatures– This pump can be connected to a variety of different shapes of nozzles to spray different water types.-Uses high-efficiency solar panels and the new brushless water pump, which has the advantages of fast start-up, high efficiency and strong stability.-Can work as …
6V 180L/H Solar Power Floating Fountain Garden Landscape Water Pump 55-75cm LiftingRead More
Reviews
There are no reviews yet.