10V 12V 24V 36V PWM DC Controller with Positive inversion Switch PWM DC Controller for DC Motor Speed Controller 150W
$8.73
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. Connect the motor, the motor wire can be positive or negative.
2. Adjust the switch, the forward and reverse switch is used to control the direction of the motor speed. When the switch is at the zero position, the motor stops.
3. Potentiometer knob. Adjusting the potentiometer knob can change the output duty ratio of the governor and the motor speed.
Specifications
1. Input voltage requirement:10V-40VDC (wide range)
2. Output power:150W
3. Continuous current:5A, overload short circuit protection current 8A, short circuit time no more than 30 seconds
4. PWM pulse width modulation range:0%-100%
5. Size:length 74mm*width 46mm height about 27mm
according to the center distance of the mounting hole 63.5mm*36.5mm
positioning hole diameter 3.5mm
6. Weight:60 grams.
Introduction to PWM
The full name of pulse width modulation is:Pulse WidthModulator, or PWM for short. Because of its special performance, it is often used as a lamp dimming in a DC loop or a DC motor speed regulating. This circuit is a motor controller made using the principle of pulse width modulation (PWM). Using this method to control the motor speed has two advantages
1. It is mainly by changing the duty cycle of the output square wave to change the average on-time on the load from 0-100% to achieve the purpose of adjusting the brightness/speed of the load. The advantage of using pulse width modulation (PWM) to achieve dimming/speed regulation is that the energy of the power supply can be fully utilized and the efficiency of the circuit is high. For example:when the output is a 50% square wave, the power source energy consumed by the pulse width modulation (PWM) circuit is also 50%, that is, almost all energy is converted into load power output. When the common resistor step-down speed regulation is used, to make the load obtain 50% of the maximum output power of the power supply, the power supply must provide more than 71% of the output power, of which 21% is consumed by the voltage drop and heat consumption of the resistor.
2. The pulse width modulation (PWM) method can make the load get the full power supply voltage when it is working, which is beneficial to overcome the internal coil resistance of the motor and make the motor generate greater torque.
Wiring
1. Connect the power cord, ensure that the positive and negative switches are in the middle zero position, connect the DC power supply, ensure that the DC power supply voltage range is greater than 10V and less than 40V, and ensure that the output power of the power supply meets the needs of the motor. Do not connect the positive and negative terminals of the DC power supply in reverse, otherwise The governor may be damaged.
Package Inlcuded
1 x 10V 12V 24V 36V PWM DC Controller
Weight | 0.065 kg |
---|
Customers Also Viewed
M5Stack Ultra-Wideband UWB UnM5Stack Ultra-Wideband UWB Unit indoor Positioning Module DW1000 Low Power Consumption for indoor Wireless Tracking Rangeit indoor Positioning Module DW1000 Low Power Consumption for indoor Wireless Tracking Range
$87.06Test & Measuring ModuleAdd to cartDescriptionUWB is a Unit which integrates the UWB(Ultra Wide Band) communication protocol which uses nanosecond pulses to locate objects and define position and orientation. The design uses the Ai-ThinkerBU01 Transceiver module which is based on Decawave’s DW1000 design. The internal STM32 chip with its integrated ranging algorithm,is capable of 10cm positioning accuracy and also supports …
3 in 1 LED Ultrasonic Anti Barking Pet Dog Train Repeller Control Trainer Device
$36.44Solar CollectorsAdd to cartLED Ultrasonic Dog Repeller Handheld Dog Trainer Device 3 in 1 Anti-barking Stop Bark Dog Deterrent Training ToolsFeaturesUltrasonic design-Adopts ultrasonic technology, make the dogs be quite and can effectively train your dogs to be obedient and stop some unwanted behaviors, protect you from being attacked by unfriend dogs. Multi-function deviceThe dog repeller have 3 functions, …
3 in 1 LED Ultrasonic Anti Barking Pet Dog Train Repeller Control Trainer DeviceRead More
3pcs DC 3.7-7.4V 4A 800-1000KV High Voltage Pulse Generator Super Arc Pulse Ignition Coil Module
$32.59Electronic Accessories & SuppliesAdd to cartDescriptionInput parameters:3.7-7.4V/4A input, cable length:about 10 cm (red + green -)Output parameter:800-1000KV / 0.5A, cabl length:about 16 cmHigh voltage polarization discharge distance:1.5-2cm (don’t exceed)Size:3.4 x 2.3 x 1.7cmAbout input power:can use 3.7V lithium battery input (such as 18650 battery), 4V or 6V lead acid battery and so on. The input voltage current affects the output …
Semiconductor Chilling Plate Cooling fan Kit TEC1-12706 thermoelectric Peltier Cooler Refrigeration Cooling System
$37.17Module KitsAdd to cartDescriptionAdopt TEC1-12706 semiconductor chilling plate, good quality for use.Complete sealed structure, isolating the moisture in the air.Higher reliability than others.Include TEC1-12706 semiconductor cooler and other accessories, easy to install.Great DIY kit for electronic enthusiasts in semiconductor cooling applications.FeatureSemiconductor Chilling Plate:TEC1-12706Size:40 * 40 * 3.75mmInternal Resistance:2.1~2.4Max. Temperature Difference:67C AboveRated Voltage:12V(Vmax. 15V, Starting Current 5.8A)Working Current:Imax.=4~4.6A(Rated 12V)Refrigeration …
Universal 40-Pin ZIF DIP IC Test Board Socket ZIF IC Socket for DIP IC MCU
$16.19SwitchesAdd to cartFeatureThis is a universal ZIF IC test socket.Great pin contact with a leverIt’s suitable for IC with 40 pinsEasy to remove and to program ICsSpecificationColor:greenMounting Type:Through holePitch:Approx. 0.1inchinch inches (2.54mm)Pin Number:40Type:DIP, ZIFSize(L x W x H):Approx. 65mm x 2.2mm x 1.1mm(L x W x H not include the pins and lever)Package Included1 x IC socket
AUDEW Premium Tire Pressure Gauge 0-100 PSI Heavy Duty & Accurate Air Pressure Tire Gauge for Car SUV Truck Motorcycle Bicycle
$28.34Switch AccessoriesAdd to cartSPECIFICATION-Applicable type:car, truck, motorcycle, bike, etc-Operating Temp:- 20 ℃ ~ + 40 ℃-Range:0-100 psi-Unit of measurement:PSI, BAR-Resolution:0.05 kg/cm-Accuracy:+/-1%+0.5psi(relative humidity Temperature 25 ℃)FEATURES1.More than a tire pressure gauge, also can deflate overinflated tires with a built-in air bleeder valve.2.High accuracy and easy to read with 2 units of measurement.3.Made with premium heavy duty matel materials, sturdy …
Reviews
There are no reviews yet.