3pcs HC-SR501 Adjustable infrared IR Pyroelectric PIR Module Motion Sensor Human Body induction Detector
$8.65
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. Automatic induction:When someone enters its induction limits, enter the high level, people leave the sensor range is automatically delayed off high. Output low.
2. photosensitive control (optional):the module reserved for location, can be set to photosensitive control, strong light during the day or not induction. Photosensitive control is optional, the factory did not install the photosensitive resistor. If necessary, please buy a separate photosensitive resistor to install.
3. Two trigger modes:L is not repeatable, H is repeatable. Can be jumper selected, the default is H.
A. non-repeatable trigger mode:the induction output high, the delay time is over, the output will automatically change from high to low.
B. Repeated trigger mode:that is, after sensing the output high, in the delay time period, if the human body in its sensing limits of activities, its output will remain high until the delay after the person will leave the high The level changes to low level (the sensing module automatically delays a delay time after every activity of the human body, and takes the time of the last activity as the starting point of the delay time).
4. Induction blocking time (default setting:3-4 seconds):After each sensing output (high level goes low), the sensing module can be followed by a blocking time, during which it is sensed The device does not receive any sense signals. This function can be used to achieve the interval between the sensing output time and the blocking time. It can be applied to the interval detection products. At the same time, this function can effectively suppress all kinds of interference in the process of load switching.
5. Wide operating voltage:the default operating voltage DC5V to 20V.
6. Micro-power:Quiescent current 65 microamps, especially for dry battery-powered electrical products.
7. Output high-level signal:can be easily with various types of circuits to achieve docking.
Instructions for use
1. Induction module power about one minute after the initialization time, at this time the module will output 0-3 times a minute, a minute into the standby state.
2. Light and other interference should be avoided Directly close the surface of the lens module, so as not to introduce interference with the signal to produce malfunction; use of the environment as far as possible to avoid
Free flow of wind, the wind will cause interference to the sensor.
3. Sensor module with dual-element probe, the probe window is rectangular, dual element (A yuan B yuan) in the longer direction at both ends, when the body from left to right
Or from right to left through the infrared spectrum to the dual time, distance difference, the greater the difference, the more sensitive induction, when the body from the front to the probe
Head or from top to bottom or from bottom to top direction, the dual element can not detect infrared spectral distance changes, no difference, so the sensor insensitive or does not work; so the sensor should be installed so that the direction of the probe dual And the direction of human activity as much as possible parallel to ensure that the body has been through
Probe dual-element induction. In order to increase the sensing angle limits, this module uses a circular lens, also makes the probe four sides are sensitive, but the left and right sides are still
However, compared with the upper and lower direction of the two induction limits, sensitivity, installation must still try to according to the above requirements.
Use should pay attention to the following points
1. The DC voltage must meet our requirements, too high and too low will affect the performance of the module, but also requires the power supply must be a good regulator filter, such as computer USB power, mobile phone charger power supply, the old 9V stacked battery Are unable to meet the module work requirements, it is recommended that customers use the power transformer and the regulator through the three-terminal voltage regulator and then through the 220UF and 0.1UF capacitor filter power supply.
2. Although the human body is not in front of the module, but the human body from the module is too close to the module can also be caused by the sensor output, as well as debugging the human body do not touch the circuit part will also affect the module work , A more scientific approach is to output a LED or a multimeter, the module covered with a newspaper, when someone leaves room, wait 2 minutes and see if the module still has output.
3. The module does not take the load to work properly, connected to the load after the work of chaos, one reason is because the power capacity is very small load power consumption, load caused by voltage fluctuations caused by the module malfunction, the other reason is the load The power will have interference in the work, such as relays or electromagnets and another inductive load will produce a reverse electromotive force, 315M emission plate will have electromagnetic radiation and other work will affect the module. The solution is as follows:A, the power part of the inductor filter. B, using the load and the module using different voltage methods, such as:load using 24V operating voltage, the module uses 12V operating voltage, during which the use of three-terminal regulator isolation. C:Use a larger capacity power supply.
4. The human body sensor module can only work indoors and the work environment should avoid the sun, a strong direct light exposure, if the work environment has a strong RF interference, you can use shielding measures. In case of strong air interference, close the doors and windows or prevent convection. The induction area to avoid facing heating appliances and objects as well as easy to wind debris and clothing.
5. The human body sensor module is recommended to install in a sealed box, otherwise, there may have been the output signal.
6. If the body sensor module detection angle is less than 90 degrees, you can use opaque adhesive tape to cut off the lens or cut lens to achieve.
7. The human body sensor module with dual-element probe, the body’s hands and feet and head movement direction and the sensitivity of the sensor are closely linked, and the infrared module determines the characteristics of the sensor can not accurately control the distance.
8. The module of the probe (PIR) can be mounted on the other side of the circuit board. The probe can also be extended with a two-core shielded cable, the length should be less than 20 cm as well.
Package includes
3 x HC-SR501 Motion Sensor
Weight | 0.027 kg |
---|
Customers Also Viewed
50A Maxi Car Fuse with Weatherproof Holder 8AWG (8B&S) Wire Dual Battery for Car
$18.35Module ComponentsAdd to cartSpecificationColor:Black + RedSpecs:50AWire Length:15 cm(8AWG)Features50 AMP Fuse is included.This product will withstand tough jobs.It is waterproof and very heavy duty in construction.This fuse kit is perfectly suited for projects involving:4WD, 4X4, Caravan, Dual Battery, Batteries, AC DC, 12-32 Volt.Package Included1 x Maxi Blade Fuse Holder (15cm 8AWG Wire Each Side)1 x 50 Amp Fuse
HX-2S-A10 2S 8.4V-9V 8A Li-ion 18650 Lithium Battery Charger Protection Board 8.4V Overcurrent Overcharge Overdischarge Protection
$4.36Battery Protection ModuleAdd to cartSpecificationsModel:HX- 2S-A10 Maximum working current:8AMaximum instantaneous current:16AStatic current:less than 10uA Resistance:less than 300 m Ω Charging voltage:7 V – 9VOvercharging range:4.25-4.35V plus or minus 0.05VOver voltage range:2.5-3.0V plus or minus 0.05 VWorking temperature:- 40 – + 50 →Storage conditions:- 40 – + 80 →Size:41 * 8 * 2.2 mm Short circuit protection:to protect and restore …
DL14S 14S 48V BMS Battery Protection Board 15A 20A 30A 40A 50A 60A Waterproof BMS for Rechargeable Lifepo4 Electric Charge Li Lipo NiCoMn ion Cells with Balance
$37.17Battery Protection ModuleAdd to cartCurrent 15A Type Common Port / Current 20A Type Common Port / Current 30A Type Common Port / Current 40A Type Common Port / Current 50A Type Common Port / Current 60A Type Common Port / Current 15A Type Separate Port / Current 20A Type Separate Port / Current 30A T
16V16.6F Automotive Rectifier Low Temperature Starter Super Farad Capacitor Module 2.7100F
$50.18Electronic Accessories & SuppliesAdd to cartFeaturesFast charge and discharge. Long life. Large capacity. High power density. Good low temperature characteristicsSpecificationBrand:GDCPHModel:16V16.6FSeries:Super capacitor (16V)Nominal capacity:16.6FTolerance:10 %Rated voltage:15-16 VOperating temperature range:- 40→~70→Lead spacing:120mmDimensions:120*62*20mm(Length *Height *Thickness)Height-installation (maximum):62mmInstallation type:weldingCase:Aluminum capacitorApplication scope:self-provided power supply, standby power supply, alternative power supply, mobile power supplyPackage included1 x 16V16.6F Super Farad Capacitor
HC-SR505 Mini infrared PIR Motion Sensor Precise infrared Detector Module
$6.55Sensor & Detector ModuleAdd to cartHC-SR505 Mini Infrared PIR Motion Sensor Precise Infrared Detector ModuleIntroductionHC-SR505 small body sensing module is based on infrared technology, automatic control products, high sensitivity, high reliability, ultra-small, ultra-low-voltage operation mode. Widely used in various auto-sensing of electrical equipment, especially battery-powered automatic control products.SpecificationSize:40 x 10 x 13mmNet weight:2gTechnical parameters1. Operating Voltage Range:DC4.5-20V2. Static current3. Output …
HC-SR505 Mini infrared PIR Motion Sensor Precise infrared Detector ModuleRead More
4 Blade Eco Friendly Heat Powered Wood Log Burner Fireplace Stove Fan Silent
$97.19Temperature ControllersAdd to cartFeatures– More efficient wood use – Use up to 28% less wood – Heat powered stove fan – increases the efficiency of your freestanding stove oven or wood / log burner to generate warmth economically– Eco-friendly and self-powered – a thermoelectric module acts as a small generator to power the fan’s motor– Operates automatically between …
4 Blade Eco Friendly Heat Powered Wood Log Burner Fireplace Stove Fan SilentRead More
15W Solar Charger Solar Power Panel Waterproof Folding Solar Panel Bag Solar Panel Charger
$66.81Solar PanelAdd to cartPackage Included1x 15W solar panel chargerSpecificationColor:BlackMaterial:Mono-crystalline Silicon+PET+ fabricExtended size:65*17*0.3cmFolded size:18.5* 11.5*2cmPower(MAX):15WMaximum Power Voltage (Vmp):5VMaximum Power Current (Imp):2ANumber of Cells:36pcsOutput:USB5VPackage:Neutral packagingCharging temperature:-20~70℃Waterproof:IP65Conversion rate:20%Application:security camera, laptops, car batteries, cars, coaches, ships, airplanes, satellites, space stations, outdoor farming, planting, tourism, solar street lights etcFeature– Durable and waterproof.– Light weight and thin shape can be stored more easier and …
15W Solar Charger Solar Power Panel Waterproof Folding Solar Panel Bag Solar Panel ChargerRead More
3pcs RX24 50W 100R 100RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$9.36Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
Reviews
There are no reviews yet.