HC-SR501 Adjustable infrared IR Pyroelectric PIR Module Motion Sensor Human Body induction Detector with Bracket
$6.55
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. Automatic induction:When someone enters its induction limits, enter the high level, people leave the sensor range is automatically delayed off high. Output low.
2. photosensitive control (optional):the module reserved for location, can be set to photosensitive control, strong light during the day or not induction. Photosensitive control is optional, the factory did not install the photosensitive resistor. If necessary, please buy a separate photosensitive resistor to install.
3. Two trigger modes:L is not repeatable, H is repeatable. Can be jumper selected, the default is H.
A. non-repeatable trigger mode:the induction output high, the delay time is over, the output will automatically change from high to low.
B. Repeated trigger mode:that is, after sensing the output high, in the delay time period, if the human body in its sensing limits of activities, its output will remain high until the delay after the person will leave the high The level changes to low level (the sensing module automatically delays a delay time after every activity of the human body, and takes the time of the last activity as the starting point of the delay time).
4. Induction blocking time (default setting:3-4 seconds):After each sensing output (high level goes low), the sensing module can be followed by a blocking time, during which it is sensed The device does not receive any sense signals. This function can be used to achieve the interval between the sensing output time and the blocking time. It can be applied to the interval detection products. At the same time, this function can effectively suppress all kinds of interference in the process of load switching.
5. Wide operating voltage:the default operating voltage DC5V to 20V.
6. Micro-power:Quiescent current 65 microamps, especially for dry battery-powered electrical products.
7. Output high-level signal:can be easily with various types of circuits to achieve docking.
Instructions for use
1. Induction module power about one minute after the initialization time, at this time the module will output 0-3 times a minute, a minute into the standby state.
2. Light and other interference should be avoided Directly close the surface of the lens module, so as not to introduce interference with the signal to produce malfunction; use of the environment as far as possible to avoid
Free flow of wind, the wind will cause interference to the sensor.
3. Sensor module with dual-element probe, the probe window is rectangular, dual element (A yuan B yuan) in the longer direction at both ends, when the body from left to right
Or from right to left through the infrared spectrum to the dual time, distance difference, the greater the difference, the more sensitive induction, when the body from the front to the probe
Head or from top to bottom or from bottom to top direction, the dual element can not detect infrared spectral distance changes, no difference, so the sensor insensitive or does not work; so the sensor should be installed so that the direction of the probe dual And the direction of human activity as much as possible parallel to ensure that the body has been through
Probe dual-element induction. In order to increase the sensing angle limits, this module uses a circular lens, also makes the probe four sides are sensitive, but the left and right sides are still
However, compared with the upper and lower direction of the two induction limits, sensitivity, installation must still try to according to the above requirements.
Use should pay attention to the following points
1. The DC voltage must meet our requirements, too high and too low will affect the performance of the module, but also requires the power supply must be a good regulator filter, such as computer USB power, mobile phone charger power supply, the old 9V stacked battery Are unable to meet the module work requirements, it is recommended that customers use the power transformer and the regulator through the three-terminal voltage regulator and then through the 220UF and 0.1UF capacitor filter power supply.
2. Although the human body is not in front of the module, but the human body from the module is too close to the module can also be caused by the sensor output, as well as debugging the human body do not touch the circuit part will also affect the module work , A more scientific approach is to output a LED or a multimeter, the module covered with a newspaper, when someone leaves room, wait 2 minutes and see if the module still has output.
3. The module does not take the load to work properly, connected to the load after the work of chaos, one reason is because the power capacity is very small load power consumption, load caused by voltage fluctuations caused by the module malfunction, the other reason is the load The power will have interference in the work, such as relays or electromagnets and another inductive load will produce a reverse electromotive force, 315M emission plate will have electromagnetic radiation and other work will affect the module. The solution is as follows:A, the power part of the inductor filter. B, using the load and the module using different voltage methods, such as:load using 24V operating voltage, the module uses 12V operating voltage, during which the use of three-terminal regulator isolation. C:Use a larger capacity power supply.
4. The human body sensor module can only work indoors and the work environment should avoid the sun, a strong direct light exposure, if the work environment has a strong RF interference, you can use shielding measures. Because of the strong air interference, close the doors and windows or prevent convection. The induction area to avoid facing heating appliances and objects as well as easy to wind debris and clothing.
5. The human body sensor module is recommended to install in a sealed box, otherwise, there may have been the output signal.
6. If the body sensor module detection angle is less than 90 degrees, you can use opaque adhesive tape to cut off the lens or cut lens to achieve.
7. The human body sensor module with dual-element probe, the body’s hands and feet and head movement direction and the sensitivity of the sensor are closely linked, and the infrared module determines the characteristics of the sensor can not accurately control the distance.
8. The module of the probe (PIR) can be mounted on the other side of the circuit board. The probe can also be extended with a two-core shielded cable, the length should be less than 20 cm as well.
Package includes
1 x HC-SR501 Motion Sensor
1 x Bracket
Weight | 0.016 kg |
---|
Customers Also Viewed
300W Digital Amplifier Speaker Protection Board 2.1 Channel Relay Speaker Protection Module Boot Delay DC Protection
$15.30Relay ModuleAdd to cartFeatures1.With delay and DC protection (default 1.8V control, DC sensitivity can be adjusted)2. This common power DC protection board uses an optocoupler. Since the optocoupler has input and output isolation,3. Electrical signal transmission has the characteristics of unidirectionality, so it has good electrical insulation and anti-interference ability.4. Since the input end of the optocoupler belongs …
AB18 2SA1943/2SC5200 High Power 300W + 300W Dual Channel Class A/B Power Amplifier Board for Sound Speaker DIY
$125.17Amplifier BoardAdd to cartProduct description1. Using Japan imported original brand new 2SA1943/2SC52002. Electrolytic capacitor adopts imported electrolysis to ensure strong continuous power support.3. The resistor uses high-precision resistors, and the main circuit uses high-precision resistors with an accuracy of ÷ 1% to ensure a good signal-to-noise ratio for the whole machine.4. The PCB adopts 1.6mm thick double-sided sheet, …
5pcs DMP-L1 WiFi intelligent Lighting Module Built-in ESP ESP8285 WiFi Chip for Smart Home
$28.82Smart ModuleAdd to cartDescriptionThe core processor of DMP-L1 module adopts industrial chip ESP8285. The chip integrates an enhanced version of the Tensilica’s L106 Diamond Series 32-bit core processor in smaller size packages. ESP8285 has a complete Wi-Fi network function, which can be used independently from the controller. Its built-in cache memory greatly provides CPU performance.DMP-L1 module supports standard …
5pcs DMP-L1 WiFi intelligent Lighting Module Built-in ESP ESP8285 WiFi Chip for Smart HomeRead More
Wareshare 5.5 inch AMOLED HDMI Display Capacitive Touch Screen with Tempered Glass Support for NVIDIA Jetson Nano Raspberry Pi
$229.66Display ScreenAdd to cartDocumentsManual:Click here to openDatasheet:Click here to openSoftwarePanasoni SDFormatterWin32DiskImagerPuTTYOverviewThis product is a universal 5.5-inch HDMI display with 1080≠1920 ultra-clear resolution and a capacitive touch panel. Support for Raspberry Pi and various mini PCs, also as a computer monitor.Features5.5inch AMOLED, 1080×1920 resolution.Toughened glass capacitive touch panel.Supports popular mini PCs such as Raspberry Pi, as well as general …
5pcs 20x20x15mm DIY CPU IC Chip Heat Sink Extruded Cooler Aluminum Heat Sink
$4.36Electronic Accessories & SuppliesAdd to cartFeatureAluminum heat sinks for electronics, computers, electrical facilities, play a cooling effectSpecificationMaterials:AluminumSize:20*20*15mm (L*W*H)Color:SilverQty:5pcsPackage includes5 x CPU IC Chip Aluminum Heat Sink
5Pcs Yellow Backlight 1602 Character LCD Display Module
$24.89Display ScreenAdd to cartDescriptionLCD display module with yellow backlightWide viewing angle and high contrastBuilt-in industry standard HD44780 equivalent LCD controllerCommonly used in:copiers, fax machines, laser printers, industrial test equipment,networking equipment such as routers and storage devicesLCM type:CharactersCan display 2-lines X 16-charactersOperate with 5V DCModule dimension:80mm x 36mm x 12mmViewing area size:64.5mm x 16mmPackage included5 X LCD display module
Bathtub Caddy Bamboo Bath Tub Holder Bathroom Tray Glass Book Reading Rack Stand
$106.76FoamAdd to cartSpecificationMaterial:BambooColor:WoodSize:(L)X(W)X(H)105X22X4cm/41.34inchX8.66inchX1.57inch(appr.)Features1. Constructed from durable bamboo and metal supporting frame in excellent craftsmanship for many years use.2. Varnish processing on surface, lightweight and easy to operate.3. Books can be held with metal rack stably for reading when bathing.4. Books, phone, towl, and food can be placed on it for convenient reach.5. Its length is adjustable between …
Bathtub Caddy Bamboo Bath Tub Holder Bathroom Tray Glass Book Reading Rack StandRead More
Reviews
There are no reviews yet.