Mini DC-DC Adjustable Step Down Power Supply Module 12V 24V to 5V 3.3V 9V 3A mini360
$4.36
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. Adopt new imported chips.
2. The maximum output current is 3A, running 2.1A for a long time, and the surplus is sufficient. 3A runs for about 20 seconds and the chip enters the overheat protection and restarts. It can work at 3A current by cooling and cooling the chip.
3. Using a new design scheme, the circuit design does not need electrolytic capacitors and tantalum capacitors (electrolytic capacitors have short life, tantalum capacitors are in danger of explosion). Three large-size solid-state ceramic capacitors (MCC) are used in high-end circuits.
4. Using non-isolated DC synchronous rectifier, the circuit conversion efficiency is very high. The efficiency is 97.5% at 6.5V to 5V 0.7A and 94% at 12V to 5V1A.
5. The use of integrated inductance, low internal resistance, greatly improve the conversion efficiency. It reduces calorific value and improves efficiency, and has lower calorific value than common shielded inductor.
Note
1. In the case of low static current, 12V input and output 5V voltage, and strip LED lamp indicator, the static current is less than 0.45 mA.
2. Connecting to car batteries without switching, can be on the cigarett lighter line, or on the ACC power wire.
3. Output integration can be adjusted and fixed voltage. Fixed output is not customized. It can be directly spot-welded on the board. Special voltage can be regulated by potentiometer. It is very versatile.
4. Output with LED light indication, convenient and intuitive indication with voltage output.
5. With enabling ports, the default mode of operation is low-level shutdown, which brings convenience to control.
6. Can be used to replace 78 series linear regulators, such as 7805 7812 and so on.
Specification
Input voltage:DC 4.5-24VOutput current:3A
Conversion efficiency:97.5%
Switching frequency:500Khz
Output ripple:20mV
Load adjustment rate:+1%
Voltage adjustment rate:0.5%
Dynamic response speed:5% 200uS
Size:18 x 10 x 3.8mm
Package included
1 x Mini DC-DC Adjustable Step Down Power Supply Module 12V 24V to 5V 3.3V 9V
Weight | 0.004 kg |
---|
Customers Also Viewed
5pcs XH-M172 intermittent Working Module 0-999 Minutes Timing Working Module Output Switch Control Board
$41.46Power Supply ModuleAdd to cartFeatureProduct Name:Intermittent working moduleProduct model:XH-M172Input voltage:DC12VOutput type:relay output 10AService life:more than 100,000 timesWorking temperature:-30~60 degreesSetting range:1-999 minutesProduct size:53 x 35 x 16mmPackage includes5 x Intermittent working module
3 Axis GRBL USB Driver offline Controller Control Module LCD Screen SD Card for CNC 1610 2418 3018 Wood Router Laser Engraving Machine
$38.46Engraving Parts & AccessoriesAdd to cartDescriptionThis offline controller is designed for the use of Mini CNC router 1610/2418/3018 and even with more advanced function of tool set, limit switch supportive, Laser supportive; Offline and Bluetooth supportive.SpecificationFirmware:GRBL 08, 09, 1.1and so onInput Voltage:DC 7V- 36VApplicable CNC Router:3 Axis CNC router 1610; 2418; 3018Features1. Support GRBL and benbox firmware.Support CNC 3-axis laser …
Single Chip Microcomputer DC Motor Control Module L6201 Driver Module
$14.49Other Module BoardAdd to cartDescription The dc motor drive module is the L6201 chip drive module.L6201 is full control bridge drive chip ,which adopting multi sourcing technology BCD (Bipolar, CMOS, DMOS) to control motor. This chip can integrate independent DMOS field-effect transistors with CMOS and diodes on a single chip.L6201 can realize the optimization of logic circuits and power …
Single Chip Microcomputer DC Motor Control Module L6201 Driver ModuleRead More
ESP32S ESP32 0.5A Micro USB Charger Board 18650 Battery Charging Shield without Battery
$10.92Expansion Board & ShieldAdd to cartSpecifications Input port:Micro USB USB output type:Type-A 0.5A current charging 1 switch control USB output Input Voltage:5~8V Output:3V & 1A (x3)and 5V & 4A (x3) LED indicate:Green means full,Red means charging Size:9.8×2.9cm Note Be careful of inch+inch and inch-inch, You should follow the direction of inch+inchinch-inch on the PCB.If you put wrong direction, charging chip …
ESP32S ESP32 0.5A Micro USB Charger Board 18650 Battery Charging Shield without BatteryRead More
Red Laser Dot Sight Scope 20mm Picatinny Rail with 25mm Flashlight Ring Mount Clamp Holder
$26.31Laser SightAdd to cartNotice (Please read this first)1. This item runs on 3pcs AG13 / LR44 Batteries which are Not Included. You need to buy them at your Local Shop. Hope you consider it before order.2. Besides, The laser light image shown here is for reference only. In actual use, the laser light beam is INVISIBLE and it …
Red Laser Dot Sight Scope 20mm Picatinny Rail with 25mm Flashlight Ring Mount Clamp HolderRead More
Reviews
There are no reviews yet.