5pcs DC8V-35V To 5V 8A Power Step Down Module 4-Port USB Mobile Phone Car Charger Support Fast
$53.37
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. 4 independent dedicated charge management IC, can effectively support a variety of mobile phones for maximum current charging, charging speed, safe and reliable.
2. The charge identification IC is compatible with Apple’s full range of Android products. The vast majority of mobile phones can achieve the fastest charging speed.
3. Supports 4-channel USB for simultaneous 2A current charging, large current charging, and total output current up to 8A.
4. Input adopts MOS tube reverse connection protection, which maximizes conversion efficiency and reduces loss.
5. Output with over-voltage protection to see effective protection of mobile phones.
6. 8-35V ultra-wide input voltage, 12V 24V car can perfectly support.
Module parameters
Input voltage:DC 8-35V
Input current:5.5A
Output voltage:5.2V
Output current:total maximum 8A, self-adaptive, mobile phone single port charge up to 2A.
Dynamic response speed:300us (load flow change 5%)
Conversion efficiency:95% (measured at 12V to 5.2V3.5A, efficiency is related to differential pressure and load size.)
Load regulation:0.2-0.3% (measured by 10% load and 12V input)
Ripple & Noise:120mVP-P (20MHz Bandwidth 12V to 5.2V3A Measured)
Switching frequency:100KHz
No-load current:18mA (measured by 5V at 12V)
Wiring method:IN input OUT input Terminal block DC block
Fixed method:M3*1 M2*2
Appearance size:54 (long) * 39 (width) * 21 (high) mm (including USB port)
Supporting device
Mobile phones, digital cameras, tablet computers, navigators, tachographs, etc. that require USB powered devices.
Can charge 4 mobile phones at the same time, 4 total current 8A.
A variety of input and output methods, support terminal input, DC block input, output support 4 * USB output, terminal output 5V.
Precautions
(1) Do not use over-voltage and overload, otherwise it will damage the battery and power supply.
(2) Modules can only be stepped down and cannot be boosted, and cannot supply power to electrical equipment that is higher than the input voltage.
(3) Pay attention to the ventilation and heat dissipation when working with a large amount of current and power for a long time to extend the service life of the power supply.
(4) Do not work at full capacity for a long time. Please keep 20% of the margin when working continuously. Pay attention to ventilation and heat dissipation.
Package included
5 x DC8V-35V To 5V 8A Power Step Down Module 4-Port USB Mobile Phone Car Charger
Weight | 0.185 kg |
---|
Customers Also Viewed
Solar Powered Floating Bird Bath Water Fountain Pump Pond Pool Water Pump
$42.51Electrical Pump & ValveAdd to cartDescriptionThis product is solar-powered decorative fountain.It is made up of highly efficient solar panel and new brushless pump.IT is start-up fast,efficient and strong stability.In addition,it has no electric outlet or external battery,so it’s not only easy to use,but also safe.This product is suitable for bird bath,fish tank,small pond,garden decoration,water circulation for oxygen,etc.FeatureSolar panel:7V/1.4WBrushless pump input:DC4.5-10VMaximum …
Solar Powered Floating Bird Bath Water Fountain Pump Pond Pool Water PumpRead More
Vibration Switch Sensor Module Vibration Sensor Alarm Module Smart Car Accessories
$4.36Sensor & Detector ModuleAdd to cartFeatures 1. Onboard LM393 voltage comparator chip and vibration sensing probe2. Support 5V/3.3V voltage input3. Onboard signal output indication, the output valid signal is low level and the indicator light is on, the output signal can be directly connected with the single chip IO4. The sensitivity of signal detection can be adjusted5. With 3mm screw …
Vibration Switch Sensor Module Vibration Sensor Alarm Module Smart Car AccessoriesRead More
TPA3116 Dual Channel 50Wx2 Digital Amplifier Board
$23.15Amplifier BoardAdd to cartSpecificationPower amplifier chip:TPA3116Power supply voltage:11 ~ 26VDC DC input with limit reverse polarity protection(Recommended DC 24V current 3A and above switching power supply)Output power:stereo 50W + 50W, PBTL monaural 100WLoad impedance:4 to 8 ohms (horn speaker impedance)Audio input:2.54mm3 pin seatPackage Included1 x Digital Amplifier Board
5pcs Geekcreit 3 in 1 AC 60-500V 100A Square Yellow LED Digital Voltmeter Ammeter Hertz Meter Signal Lights Voltage Current Frequency Combo Meter indicator Tester with Round CT
$48.24Electronic Accessories & SuppliesAdd to cartDescriptionDisplay:Voltage, current, frequencyDisplay color:YellowMeasuring voltage range:60~500V AMeasuring current range:6~100AMeasuring frequency range:20-70HzSize:2.8*5cm/1.10inch*1.97inch (D*H)Note:Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!!Package included5 x 22MM Indicator5 x Round CT
5pcs Nano V3.0 Terminal Adapter AVR ATMEGA328P without NRF2401+ Expansion interface DC Power Board
$38.18Expansion Board & ShieldAdd to cartFeature1. The item is a terminal expansion adapter, working very well for prototyping Nano projects2. There are pins expansion hole for the NANO board, which can directly lead the pins; With DC power supply interface, you can directly add external power or battery to supply power3. With NRF2401+ expansion interface, you can insert NRF2401+ to …
Reviews
There are no reviews yet.