Constant Voltage Constant Current Step Down Module with LED Display Battery Charging Board DC 5-36V
$19.67
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1, On-board voltage, current and power meter. This module can be easily used without a multimeter, which is simpler and more intuitive.
2, On-board USB interface, can easily charge digital products. (Note:The USB output voltage is the same as the module output voltage. It is not a fixed 5V output. Please confirm before charging the USB device.)
3, High power, high efficiency, 5A, low ripple;
4, Three major functions
(1) Used as a normal step-down module with overcurrent protection capability;
(2) It is used as a charger for various voltage value lithium batteries, batteries, nickel-cadmium nickel-hydrogen batteries (battery packs), and used in solar panels, wind turbines, etc.;
(3) Used as a high power LED constant current driving module;
5, With constant voltage and constant current two modes, there are indicators to indicate which mode the module is currently in;
6. When used as a lithium battery charger, you can set the float voltage and the charge current. There are indicators to indicate whether it is charging is already full;
7, With current limit protection, even if the output is short circuit will not burn the module.
8, On-board voltage, ammeter can be self-calibrated, there will never be inaccurate problems!
Specifics
Input Voltage:DC 5V To 36V (digital tube correctly displays power supply above 6.7V)
Output Voltage:1.25-32V continuously adjustable (input voltage needs to be 1.5V higher than the output voltage)
Output Current:adjustable, up to 5A (recommended for use within 4.5A)
Output Power:up to 75W (recommended to use within 50W, please reduce power when using large differential pressure)
Working Temperature:-40~+85 degrees
Working Frequency:180KHz
Conversion Efficiency:up to 96%
Is Short Circuit Protection:Yes
Is Over Temperature Protection:Yes (automatically turn off the output after over temperature)
Input Reverse Connection Protection:None, (If necessary, please input a large current diode in the input string)
Installation Method:4 3mm silk
Wiring Method:Terminal block or soldering terminal, V-IN is input, V-OUT is output.
Application range
1. Use as a normal buck module with overcurrent protection
(1) Press the right button to adjust the digital meter to the [Display Output Voltage] interface, and adjust the “Constant Piezo Transistor” to make the output voltage reach the desired voltage value;
(2) Adjust the digital meter to the [display output current] interface, directly short the output end of the module (find a thick wire to short the output end), adjust the ‘constant current potentiometer’ to make the digital meter The current value reaches the preset overcurrent protection value; (for example, if the current value displayed by the onboard ammeter is 4A, then the maximum current of the module is limited to 4A, and the red indicator light is bright when the current reaches 4A)
(3) Connect the load and work.
2. Use as a battery charger
Modules without constant current function cannot be used to charge the battery. Because of the large voltage difference between the battery and the charger.
Causes the charging current to be too large, causing damage to the battery, so start charging the battery with constant current when charging
Automatically switch back to constant voltage charging to a certain extent.
(1) Determine the float voltage and charge current of the battery; (if the lithium battery parameter is 3.7V/2200mAh, then the float voltage is 4.2V, and the maximum charge current is 1C, ie 2200mA)
(2) Under no-load conditions, adjust the digital meter of the module to the [display output voltage] interface, and adjust the ‘constant piezoelectric positioner’ to make the output voltage reach the float voltage;
(3) Adjust the digital meter to the [display output current] interface, and directly short the output end of the module (find a thick wire to short the output end), then adjust the ‘constant current potentiometer’ to make the digital meter The current value reaches a preset charging current value;
(4) The charging lamp current defaults to 0.1 times the charging current; (the battery is gradually reduced during the charging process, gradually changing from constant current charging to constant voltage charging, if the charging current is set to 1A, then when When the charging current is less than 0.1A, the blue light is off, the green light is on, and the battery is charged.
(5) Connect the battery and charge it. (Steps 1, 2, 3, and 4 are:input terminal is connected to the power supply, and the output terminal is not connected to the battery.)
3. Use as LED constant current drive module
(1) Determine the operating current and maximum operating voltage at which you need to drive the LEDs;
(2) Under no-load conditions, adjust the digital meter to the [display output voltage] interface, adjust the ‘constant piezoelectric positioner’ to make the output voltage reach the LED working voltage;
(3) Adjust the digital meter to the [display output current] interface, and directly short the output end of the module (find a thick wire to short the output end), then adjust the ‘constant current potentiometer’ to make the digital meter The current value reaches a preset LED operating current;
(4) Connect the LED and test the machine.
(Steps 1, 2, and 3 are:input is connected to the power supply, and the output is not connected to the LED light)
Precautions
1. Do not share the input ground and output ground of the module. This will cause the module current sampling resistor to bypass, so that the module can not adjust the output current. It is easy to burn the module when the load is connected.
2. The output of the module has a current sampling resistor. After the load is connected, there will be a voltage drop of 0~0.2V, which is normal.
3. When the module output voltage cannot be adjusted, please turn the potentiometer counterclockwise for more than 10 turns, then use the module to adjust the voltage normally.
4. When the output exceeds 3A or 35W, please strengthen the heat dissipation!
Package Included
1 x Step Down Module
Weight | 0.075 kg |
---|
Customers Also Viewed
500pcs 0805 (2012) SMD White LED Chip Surface Mount SMT Beads Ultra Bright Light Emitting Diode LED Lamp Electronics Components
$26.89Electronic Accessories & SuppliesAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionQuantity:500 pieces Size:2.0 x 1.2 (mm) / 0.08 x 0.05 (inch)Emitting Color:White (6000K-9000K)Luminous Intensity:180-210mcdViewing Angle:120 DegreeForward Voltage / Current:3V-3.2V | 20mAPolarity:Refer to the Arrow on the Reverse SidePackage included500 x 0805 (2012) …
5pcs AC 100-240V to DC 12V 5A 60W Switching Power Supply Module Driver Adapter LED Strip Light
$52.97Power Supply ModuleAdd to cartFeatures1. Good anti-interference performance and high reliability.2. Low operating temperature and long service life.3. Wide input voltage range, (100-240V) in line with global usage standards.4. Good insulation performance and high electric strength.5. Full load high temperature burning machine, 100% aging test.SpecificationsModel:HS-60-12DC output voltage:12VOutput voltage tolerance:±1%Rated output current:5AOutput current range:0 – 5ARipple and noise:100mVp-pLine stability:±0.5%Load stability:±0.5%DC …
4Pcs 5mm Reusable Clear Bent Glass Drinking Straws Water Juice Straws with Cleaning Brush
$22.26Bottles & JarsAdd to cartSpecificationColor:ClearMaterial:High Borosilicate GlassTube Mouth Shape:RoundTemperature Resistance:-20~450℃Total Length:21.5cm / 8.46inchInner Diameter:0.5cmFeatures– Non-toxic environmentally friendly green borosilicate heat-resistant material, safe to use, not stain, will not fade.– Widely used, can drink water, milk, juice, coffee, coke, soda, etc.– Could put it into the microwave for sterilization.Package Included4 x Glass Drinking Straws1 x Cleaning Brush
5Pcs Car Window Sun Visor Screen Car Side Rear Window Screen Sunshade Shield Curtain
$19.83Mesh & Wire ClothAdd to cartDescriptions5Pcs Car Window Sun Visor Screen Car Side Rear Window Screen Sunshade Shield CurtainSpecificationsSizeRear Sun Visor:50 * 100 CmThe Front Side Of The Sun Visor:36 * 44 CmThe Back Side Of The Sun Visor:36 * 44 CmMaterial:3D Photocatalyst MeshWeight:Approx.60 gFeatures– Convenient to use and take down with two suckers.– Can reflect 90% direct sunlight and …
5Pcs Car Window Sun Visor Screen Car Side Rear Window Screen Sunshade Shield CurtainRead More
5Pcs Micro USB TP4056 Charge And Discharge Protection Module Over Current Over Voltage Protection
$9.32Battery Protection ModuleAdd to cartCharacteristicOn-board TP4056 lithium battery charging management chipOn-board micro USB head, can be directly connected with most of the smart phone charger as the input side to the lithium battery chargingReserved IN+ and IN- input port, convenient user DIYOn-board charging status indicatorSupport charge discharge over current protectionChip with constant current and constant pressure, full automatic stopSupports …
Keyes Brick TEMT6000 Light Sensor(Pad hole) Analog Signal Module with Pin Header Version
$6.10Sensor & Detector ModuleAdd to cartDescriptionThis is a commonly used TEMT6000 light sensor which mainly uses TEMT6000X01 components. The component is a highly sensitive visible light sensitive (NPN) transistor. The sensor can magnify the change of the tiny light rays captured about 100 times, and is easily recognized by the microcontroller for AD conversion. Its response to visible light illumination …
Keyes Brick TEMT6000 Light Sensor(Pad hole) Analog Signal Module with Pin Header VersionRead More
100W18V Foldable Portable Monocrystalline Solar Panel with 5V USB Port
$301.75Smart Robot & Solar PanelAdd to cartFeatures– The outermost layer of the product is made of thick and breathable nylon bag. It`s easy to carry and portable coz it`s folable and has a handle, which is suitable for camping, hiking, hiking, and can be used as a backup power source for mobile phones and car batteries.– It`s equipped a USB&DC junction …
100W18V Foldable Portable Monocrystalline Solar Panel with 5V USB PortRead More
GY-213V-HDC1080 High Accuracy Digital Humidity Sensor with Temperature Sensor
$15.30Sensor & Detector ModuleAdd to cartDescriptionThe HDC1080 is a digital humidity sensor with integrated temperature sensor that provides excellent measurement accuracy at very low power. The HDC1080 operates over a wide supply range, and is a low cost, low power alternative to competitive solutions in a wide range of common applications. The humidity and temperature sensors are factory calibrated.FeaturesRelative Humidity …
GY-213V-HDC1080 High Accuracy Digital Humidity Sensor with Temperature SensorRead More
Reviews
There are no reviews yet.