YX-815 Battery Charging Controller Battery Protection Module for Undervoltage Control Over-discharge Protection Board 6V-48V
$19.67
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
– When the battery voltage is insufficient, disconnect the load and connect the charger. When the battery voltage is too high, disconnect the charger and connect the load.
– The battery charge controller has adjustable parameters and power-off memory function.
– Control voltage is 5V-60V, accuracy is up to 0.1V.
– The battery charge controller is suitable for batteries, lithium batteries, etc.
– The charge controller protects the battery from undervoltage, protects the battery from overcharging, and protects the load control.
Specifications
Model:YX815
Control voltage:5V-60V
Control current:20A
Control accuracy:0.1V
Voltage error:±0.1V
Scope:battery, lithium battery, etc.
Packing:anti-static bag
Size:7.9 x 4.3 x 2.8cm
Installation size:76 x 39.5mm
Voltage Setting Method
*In the setting state (digital tube flashing)
S1:Up-regulation voltage
S2:Down voltage
*S1 undervoltage setting button (charge start, load stop)
1. Under the normal display voltage, press the S1 button to display the charge start (load stop) voltage value.
2. Press and hold the s1 button to flash the digital tube. Set the charging start voltage (load stop) value with the s1 and s2 keys.
*S2 overvoltage setting button (charge stop, load start)
1. Under the normal display voltage, press the S2 button to display the charge stop (load start) voltage value.
2. Press and hold the s2 button to flash the digital tube. Set the charge stop (load start) voltage value through the s1 and s2 keys.
*Reset
In the power state, press the buttons of s1 and s2 at the same time, the digital tube displays 888, that is, the original factory setting is restored successfully.
(Note:When s1 cannot increase the voltage, first set s2, s2 can’t lower the voltage, first set s1)
Package Included
1 x YX-815 Battery Charging Controller Battery Protection Module
Weight | 0.041 kg |
---|
Customers Also Viewed
OPEN-SMART DC Jack Power 7~12V to DC5V/3.3V Step Down Converter Voltage Regulator Power Supply Module for Breadboad
$6.55Power Supply ModuleAdd to cartDescriptionThis is a mini LDO step-down power module based on AMS1117-5.0 and AMS1117-3.3, and it output fixed 5V / 3.3V.It is a small size, lightweight, especially for model airplanes, smart cars, DIY and other items, PCB experiment board project design, breadboard project design.Features– Module type:LDO step-down module;– Onboard 500mA resettable fuse to protect the power …
Temperature Alarm Kit thermistor Electronic Teaching Experiment Training Welding DIY Parts
$5.45DIY Electronic KitsAdd to cartFeatureSize:5.8*3.7cm Power supply voltage:DC 5VFunction introductionRP1, R1, R2, R3 and RT in the circuit form a temperature measuring bridge. When the temperature is below the preset temperature, the potential of pin 2 of UA741 is higher than that of pin 3, pin 6 of 741 outputs a low level, LED1 is on, and the buzzer …
Temperature Alarm Kit thermistor Electronic Teaching Experiment Training Welding DIY PartsRead More
5pcs ESP8266 ESP-01 ESP-01S DHT11 Sensor Temperature and Humidity WiFi Node Module
$18.41Smart ModuleAdd to cartFeatureThis module is mainly controlled by ESP8266-01/ESP-01S, and DHT11 is a temperature and humidity sensor. The temperature and humidity in the ESP8266 acquisition environment are uploaded to the server. Support 3.7v-12V DC power supply (3.7V lithium battery). Can be used as a temperature and humidity collection node for smart home or IOT projects.CharacteristicMaster:ESP-01/ESP-01S (This module …
5pcs ESP8266 ESP-01 ESP-01S DHT11 Sensor Temperature and Humidity WiFi Node ModuleRead More
2Pcs/Pack Plastic Tire Wheel with DC 3-6v Gear Motor for Smart Car
$13.93Smart Robot & Solar PanelAdd to cartSpecificationMotor1. Voltage:DC 3V-6V2. Current:100 MA-120MA3. Reduction rate:48:14. RPM (With tire):100-2405. Tire Diameter:65mm6. Car Speed(M/minute):20-487. Motor Weight (g):29/each8. Motor Size:70mm X 22mm X 18mm9. NoiseTire Parameter1. Center hole:5.3MM x 3.66MM2. Wheel size:65 x 26mmPackage Included2 x Smart Car Robot Plastic Tire Wheel2 x DC Gear Motor
ACS714 5A 5V Current Sensor Breakout Board Isolate Filter Resistance Capacitor Hall Effect Module
$16.23Sensor & Detector ModuleAdd to cartIntroductionThis current sensor is a carrier board or breakout board for Allegro’s ACS715LLCTR-30A-T Hall effect-based linear current sensor, The sensor operates at 5 V and has an output sensitivity of 133 mV/A. The board ships fully populated with its SMD components.FeatureDesigned for unidirectional input current from 0 to 5 A, but the sensor will provide …
SPI MCP2515 EF02037 CAN BUS Shield Development Board High Speed Communication Module
$21.86Motherboard & Development BoardAdd to cartIntroduction CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability. It is commonly found on modern machine tools and as an automotive diagnostic bus. This CAN-BUS Shield adopts MCP2515 CAN Bus controller with SPI interface and MCP2551 CAN transceiver to give your /Seeeduino CAN-BUS capibility. With …
SPI MCP2515 EF02037 CAN BUS Shield Development Board High Speed Communication ModuleRead More
Reviews
There are no reviews yet.