3pcs HX711 Dual-channel 24-bit A/D Conversion Pressure Weighing Sensor Module with Metal Shied
$10.03
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
– Two selectable differential input channels
– On-chip active low noise PGA with selectable gain of 32, 64 and 128
– On-chip power supply regulator for load-cell and ADC analog power supply
– On-chip oscillator requires no external component with optional external crystal
– On-chip power-on-reset
– Simple digital control and serial interface:pin-driven controls, no programming needed
– Selectable 10SPS or 80SPS output data rate
– Simultaneous 50 and 60Hz supply rejection
Specifications
Current consumption (including on-chip analog power supply regulator:normal operation
Operation supply voltage range:2.6 ~ 5.5V
Operation temperature range:-40 ~ 85°
Size:2.9x 1.7×0.4 cm
More document click to download:HX711
Module Detection Method
1. Preliminary quick judgment:disconnect all modules of the module, only supply the module 5v (that is, vcc is connected to 5v, gnd ground), then short the module’s ck port to ground, and then measure the out-to-ground voltage, which should be 4.5 v around, then measure the DO / RX port to ground voltage, should be about 0v, if the voltage is consistent, the module is 99% normal.
2. Complete test judgment:use the test circuit diagram provided by the shop to build a circuit, give the 89c51 single-chip computer into the hex test program provided by the store, then connect the computer with the serial cable, run the serial port assistant on the computer, you can receive the test circuit. The reading is reported and the reading is normal, indicating that the module is normal. See the test chart below for details.
Package Included
3 x HX711 Weighing Sensor Module with Metal Shied
Weight | 0.021 kg |
---|
Customers Also Viewed
5Pcs 8*4 Level indicator Kit SMD Soldering Practice Board Audio Spectrum indicator
$46.40DIY Electronic KitsAdd to cartInstalltion instruction:http://img.staticbg.com/file/products/20180108011808ASD-84S-LED-Audio-spectrum-kit.pdfFeatureModel:ASD-84SWorking voltage:DC5VStandby current:≤ 5mAWorking current:≤35mASignal input method:3.5mm audio cableLED color:0805 red, green, blue, yellowPCB size:64.2mm x 36.5mmPCB mounting hole:3mmPCB mounting hole spacing:58.1 x 30.5mmNote:When installing the LED, please keep the same line in the same color.Button method:Operating mode:Screen display:Function setting Description:Default settingShort press:Fast flash mode:3:Display refresh very fast, very dynamic:2Medium speed mode:2:Display refresh is …
5Pcs 8*4 Level indicator Kit SMD Soldering Practice Board Audio Spectrum indicatorRead More
2Pcs TEC1-12712 40*40MM Semiconductor Refrigeration Chip High Power 12V10A Constant Temperature
$26.23Other Module BoardAdd to cartFeatureChip model:TEC1-12712Dimensions:40*40*3.6mm element pairs 127Wire specification:lead length 100÷5mm RV standard wire single head 5mm tinnedInternal resistance:1.0~1.2┯ (ambient temperature 23÷1→, 1kHZ Ac test)Maximum temperature difference:Tmax(Qc=0) 55→Working current:Imax=12A (at rated voltage start)Rated voltage:DC12V (Vmax:15.5V)Cooling power:Qcmax 72WAssembly pressure:85N/cm2Working environment:temperature range -55→∥83→ (high ambient temperature will directly affect the cooling efficiency)Packaging process:standard 704 silicone rubber seals aroundPackaging standard:foam box …
40khz 35W Ultrasonic Piezoelectric Cleaning Transducer Ultrasonic Plate
$22.26Switch AccessoriesAdd to cartSpecificationsModel:CH-S42-50×2.6Resonant frequency (KHz):40 ± 1Static capacitance (pF):8000 ± 10%Resonance impedance (Ω):≤20ΩDimensions:50 * 2.6mm (diameter * height)Power (W):35wInsulation resistance (2500V DC):≥ 100MΩFeatures1. Low heat. 2. Good thermal stability.3. Frequency and static capacitance strong consistency.4. Resonant impedance is low. 5. The average length of life.6. It can be widely used in a variety of ultrasonic cleaning equipment.7. …
40khz 35W Ultrasonic Piezoelectric Cleaning Transducer Ultrasonic PlateRead More
5pcs KY-004 Electronic Switch Key Module AVR PIC MEGA2560 Breadboard
$5.10Other Module BoardAdd to cartSpecifications 1. Rating:50mA 12VDC. 2. Contact Resistance:50mΩ max. (initial) 3. Insulation Resistance:100MΩ.(minDC 250V) 4. Dielectric Strength:AC250V.(50/60Hz for 1minute) 5. Electrically Life:100,000cycles. 6. Environment Temperature:-25° to +105°. 7. Operating Force:180/230.(±20gf) 8. Seal Temperature:250°-280°. Key switch module and a digital interface, built-in 13 LED build a simple circuit to produce key warning lamp.13 comes with digital interfaces …
5pcs KY-004 Electronic Switch Key Module AVR PIC MEGA2560 BreadboardRead More
ESP32-Aduio-Kit WiFi+ bluetooth Module ESP32 Serial to WiFi Audio Development Board with ESP32-A1S
$34.98Motherboard & Development BoardAdd to cartESP32-A1S:Click here to openInstruction:Click here to openIntroductionESP32-Audio-Kit is a small audio development board based on ESP32-A1S module. Most audio peripherals are distributed on both sides of the development board, supporting TF card, headphone output, two microphone inputs and two speaker outputs. It is convenient for developers to develop quickly. Suitable for home smart devices, smart …
10pcs Smart Electronics CD74HC4067 16-Channel Analog Digital Multiplexer PCB Board Module Geekcreit for Arduino – products that work with official Arduino boards
$15.59Other Module BoardAdd to cartSpecifications1.2V to 6V operation 2.“On Inch resistance:70 Ohms @ 4.5V 3.6ns break-before-make @ 4.5V 4.Wide operating temperature range:-50→ to 125→Features– This is a pcb board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.– This chip is like a rotary switch – it internally routes the common pinto one of 16 channel pins (CHANxx).– It works …
20pcs TK1305A 12V DC Multifunctional Time Delay Relay Module with Optocoupler Isolation
$89.45Relay ModuleAdd to cart>>>Manual:Click here to openFeaturesFunction 1:Trigger once (relay), then trigger once disconnect (disconnector), each time the relay is triggered once, the module has self-locking function.Function 2:Turn on immediately after triggering, and disconnect after the delay time arrives.Function 3:Disconnect immediately after triggering, and turn on after the delay time has elapsed. (Note:the relay will not be turned …
20pcs TK1305A 12V DC Multifunctional Time Delay Relay Module with Optocoupler IsolationRead More
Reviews
There are no reviews yet.