20pcs HX711 Dual-channel 24-bit A/D Conversion Pressure Weighing Sensor Module with Metal Shied
$53.91
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
– Two selectable differential input channels
– On-chip active low noise PGA with selectable gain of 32, 64 and 128
– On-chip power supply regulator for load-cell and ADC analog power supply
– On-chip oscillator requires no external component with optional external crystal
– On-chip power-on-reset
– Simple digital control and serial interface:pin-driven controls, no programming needed
– Selectable 10SPS or 80SPS output data rate
– Simultaneous 50 and 60Hz supply rejection
Specifications
Current consumption (including on-chip analog power supply regulator:normal operation
Operation supply voltage range:2.6 ~ 5.5V
Operation temperature range:-40 ~ 85°
Size:2.9x 1.7×0.4 cm
More document click to download:HX711
Module Detection Method
1. Preliminary quick judgment:disconnect all modules of the module, only supply the module 5v (that is, vcc is connected to 5v, gnd ground), then short the module’s ck port to ground, and then measure the out-to-ground voltage, which should be 4.5 v around, then measure the DO / RX port to ground voltage, should be about 0v, if the voltage is consistent, the module is 99% normal.
2. Complete test judgment:use the test circuit diagram provided by the shop to build a circuit, give the 89c51 single-chip computer into the hex test program provided by the store, then connect the computer with the serial cable, run the serial port assistant on the computer, you can receive the test circuit. The reading is reported and the reading is normal, indicating that the module is normal. See the test chart below for details.
Package Included
20 x HX711 Weighing Sensor Module with Metal Shied
Weight | 0.14 kg |
---|
Customers Also Viewed
Cross-Section of Geometric Solids Exploring Geometry Manipulatives Mathematics Game Toys
$16.19MathematicsAdd to cartSpecificationMaterial:PlasticColor:Random ColorWeight:90gCube:(L*W*H) approx 4*4*4cm/ 1.57*1.57*1.57 inchCylinder A:(Dia*H) approx 3*3*6cm/ 1.18*1.18*2.36 inchCone:(Dia*H) approx 3*3*5cm/ 1.18*1.18*1.96 inchSphere:(Dia) approx 3cm/ 1.18 inchFeatures1.Shapes including cubes, cylinders, pyramid, sphere, cone, and various Cross-sections model.2.Cross-section of Geometric Solids Experiment set, kids math geometry manipulatives.3.Explore shape, size, pattern, volume and measurement with these invaluable hands-on tools.4.Opened and clear plastic geometric solids, easily …
Cross-Section of Geometric Solids Exploring Geometry Manipulatives Mathematics Game ToysRead More
2Pcs 20W 16V 1.25A Monocrystalline Silicon Rear Junction Box Solar Panel + 4 x Spring + Cables
$107.51Smart Robot & Solar PanelAdd to cartFeatures– The two pieces of the product are connected in parallel. Spring connection, support multiple pieces of DIY parallel connection. Mounting holes are provided on each solar panel.– Suitable for 12V batteries. Support 12V output, suitable for 12V battery charging.– High efficiency, conversion rate of 19-20%– Flexible, suitable for surface mountingSpecificationsType:Flexible solar panelMaterial:Monocrystalline siliconExpand:420*385*2.5mmFolding:420x190x2.5mmWorking temperature:-40° …
3pcs D1 Mini Lite V1.0.0 WIFI internet of Things Development Board Based ESP8285 1MB FLASH
$23.13Smart ModuleAdd to cartFeatures11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)1 analog input(3.2V max input)a Micro USB connectionCompatible with 1MB Flash500mA resettable fusePackage included3 x WEMOS D1 mini Lite3 x 2pcs Normal pin
3pcs 315MHZ Wireless Transmitter Receiving Module ASK DC 9V-12V EV1527 Remote Control Switch Board
$11.69Smart ModuleAdd to cartTechnical requestProduct model:ZF-2 (with code)Transmission frequency:315MHZWorking voltage:DC 9V ~12VModulation method:ASKQuiescent current:0uAWorking current:8~10mACoding type:learning code (EV1527)Radiated power:10~15mWShooting distance:100-200 meters (receiver sensitivity -108dBm)Volume:26.3mm*23.3mm*9mmPIN:NAME:Function1:ANT:RF signal input pin, this pin needs to be connected to the antenna2:12V-:DC power supply negative input pin3:12V+:DC power supply positive input pinRated parameter:Symbol:ValueDC power supply:VDD-VSS:9V-12VStorage temperature range (TS):TSTG:-12°C to 75°CWelding temperature:+260°CPackage includes3 x Receiving …
5Pcs Geekcreit ESP8266 ESP-01 ESP-01S WS2812 RGB LED Lamp Module Support for IDE Programming
$11.37Expansion Board & ShieldAdd to cartFeatureThis is a WS2812 RGB LED control module based on ESP-01 / 01S. With it, you can easily control the WS2812 light bar / light ring. DIY own lighting control system. Support for Ard uino IDE programming.Characteristic* Master:ESP-01 / ESP-01S (This module does not include ESP-01 / ESP-01S)* Control Pin:GPIO2* Interface:3Pin PH2.0 connector* Operating Voltage:DC …
DD30CRTA 3A 12V 1-1000AH Lead-Acid Battery Accumulator Storage Cell Charger Charging for UPS Car Solar Motorcycles Electric Vehicles
$15.30Power Supply ModuleAdd to cartSpecificationsPower supply voltage:15-28VDC(Recommended 16-25VDC)Over Charge Voltage is 14.8VFloat Charge Voltage is 13.55VMaximum charge current:3AQuiescent current:about 1.8mAHigh PWM Switching Frequency:300KHzOperating Ambient Temperature:-40→ to +85→Size:66 x 20x 12mmWeight:9gApplicationsCar battery chargingSolar battery chargingMobile LoadspeakerLead-Acid Battery ChargerElectric Bicycle ChargerUPS Portable Industrial and Medical EquipmentStandalone Battery ChargersFeaturesFixed Over-Charge VoltageOvercurrent protectionAutomatic Conditioning of Deeply Discharged BatteriesAutomatic RechargeCharger Status IndicationBattery Overvoltage ProtectionSuitable …
Reviews
There are no reviews yet.