YYD-4 Double MOS Timer Relay Module 2 Channel Cycle Delay Timing Relay for Control Solenoid Valve Water Pump Switch
$22.03
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
– To achieve high frequency, fast and frequent switching of the circuit. – The on-off process will not produce noise.
– No sparks.
– There will be no electromagnetic interference.
– Often used to control motors, light bulbs, LED strips, DC motors, micro pumps, solenoid valves, etc.
– The function mode can be set freely by the customer, and the power-off automatically memorizes the function and time set last time.
– Delay time range:0.1 seconds for 9 seconds, 1 second to 999 seconds, 1 minute to 999 minutes, the customer can adjust.
– After the parameter is cut off, it can be memorized forever. The input and output are isolated by optocoupler to enhance the anti-interference ability.
Specifications
Output capacity:DC 5A
Working voltage:DC DC 7~30V (common general working voltage 9v 12V 24V)
Quiescent current:20mA Operating current:60mA
Size:80mm*51mm*15mm
Signal terminal:high level trigger, can be connected to PNP sensor, proximity switch, button, button switch, etc.
Functions
Function 1:P——1
Give signal 1, OUT1 output, and stop automatically after delay time .
Signal 2, OUT2 output, after the delay time , automatically stop.
During the delay period, the trigger again can be freely set
A:The trigger is invalid again;
B:Trigger re-timed again;
C:The reset timing is triggered again and the motor stops immediately.
If the delay time is set to 0;
Give signal 1, OUT1 output, keep output;
Give signal 2, OUT2 output, keep output;
Function 2:P——2
No signal terminal is required, and the energized motor automatically works in turn;
Specific working mode:stop Y (seconds, minutes) – OUT1 work X (seconds, minutes) – stop Y (seconds, minutes) – OUT2 work …. cycle work. ……. Cycle work.
If the stop delay time is set to 0;
Specific working mode OUT1 work X (seconds, minutes) — OUT2 work X (seconds, minutes) — OUT1 work X (seconds, minutes) — OUT2 work X (seconds, minutes) ……….. Cycle work.
Package Included
1 x YYD-4 2 Channel Cycle Delay Timing Relay
Weight | 0.039 kg |
---|
Customers Also Viewed
2000PCS 1 Pin Header Connector Housing for Dupont Wire Jumper Compact
$31.63Electronic Accessories & SuppliesAdd to cartFeatures2.54mm Single-row strip Dupont Wire Jumper.Professional and compact, light weight.Material:PlasticSize:14 x 2.5mm/ 0.55 x 0.1inch (L x W)Color:BlackPackage includes2000 x 1Pin Header Connector
HIFI 2.0 Stereo bluetooth 5.0 Lossless Decoding 27W*2 Digital Class D Car Speaker Audio Power Amplifier Board
$8.73Amplifier BoardAdd to cartDescriptionAVN-302 is a low EMI, no filter, Class D Bluetooth audio decoding power amplifier, with an internal protection mechanism for overcurrent, undervoltage, short circuit and overheating automatic shutdown.SpecificationModel:AVN-302Power:7.4V-14.4VSize:55*50mmOutput power:27W*2Boot instructions1. Insert the U disk, load the file (reading completed) automatically enter the playback, the red indicator flashes2. In the playback state, short press the ‘P/P’ …
CJMCU-1286 PIC16F1823 Microcontroller Development Board
$8.73Motherboard & Development BoardAdd to cartDescriptionCJMCU-1286 is a PIC microcontroller minimum system, running stability and high reliability,internal resources are relatively small, so the microcontroller is simple and convenient to use.The operating voltage is 1.8V – 5.5V.Package included1 x CJMCU-1286 PIC16F1823 Microcontroller Development Board
4Pcs 7-Segment 0.56 inch 4 Digit 12 Pins Red LED Display
$8.38Display ScreenAdd to cart4Pcs 7-Segment 0.56 Inch 4 Digit 12 Pins Red LED DisplayDescriptionWith time displayCommon anodePin Number:12 pinsDigit Number:4 digitsDigit Height:0.56 inch / 1.4 cmSize (L x W ):2 x 0.75 inch / 5 x 1.9 cmColor:RedPackage included4 x 0.56’inch 4 Digit LED Display
3pcs M5Stack StickC Pro to Plus Hat Prototype Diy Protoboard Breadboard PCB Universal Board
$31.71Expansion Board & ShieldAdd to cartProduct FeaturesHole Size:0.039inch 1mm (CNC Drilled)Hole Pitch:0.1 in – (2.54 mm)Entire Hole Quantity:168 HolesPackage Included3 x PRO TO PLUS HAT3 x 8 pin header ( 90° )
Reviews
There are no reviews yet.