XH-M411 Digital Step Up Power Supply Module Boost DC-DC 3V-35V to 5V-45V Voltage Converter Regulator
$15.30
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
– This is a great DC to DC step-up power supply module for electric equipment, digital products, etc.
– Input and output are designed with screw terminals for convenient wire connection and disconnection.
– There is a heat sink on board that would ensure a better heat dissipation.
– Designed with USB and 2.5A large current output, can identify resistance and charge several phones at same time.
– It can also be used as a power supply for laptops or voltage regulator for solar panels.
Specifications
Input voltage:4.5-40V
Output voltage:5-45V
Input current:max 5A
Voltage Display Range:5V-30V(if input voltage is lower than 4.5V, it will not display)
Voltage Display Error:+/-0.1V
Size:72 x 48 x 16mm
Instruction
1. Connect the module to power supply (4.5-40V), the input indicator light is on, and module is working normally.
2. Adjust the blue potentiometer knob (generally turn clockwise to step up and turn counterclockwise to step down) and check the output voltage with a multimeter until it meets requirement.
3.If the output voltage of the module can not be adjusted, which means it is always equal to the input voltage, please turn the potentiometer counter-clockwise for several circles then the voltage can be adjusted normally.
Note
1. The output voltage is greater than the input voltage before it can be used!
2. The current can not be greater than 5A .
3. The input voltage can not be less than 4.5V.
4. This kit requires professional knowledge and ability, please make sure you know how to use it.
Package Included
1 x XH-M411 Digital Step Up Power Supply Module
Weight | 0.039 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.