3pcs Green LM3914 Battery Capacity indicator Module LED Power Level Tester Display Board
$15.82
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
– This is a DIY kits,need buyer to assemble it.
– Power display is to take some voltage, perform simulations show the percentage of segments, such as 3.7V lithium battery, take the lower voltage 3V, the upper limit of 4.2V, 4.2-3 = 1.2V, the voltage difference between the lower limit of 1.2V, is the battery Analog power up
– LM3914 can accurately detect an analog voltage, and 10 LED display, display dot mode LED is lit 10 one, or in a stripe pattern individually lit LED
– Display Description:Displays the battery voltage between the lower limit of 10 files showed that representatives of each of the lights 10% charge displays, on behalf of 10 lights display charge 0% -100% range; you can also change the single light display, is displayed only a light, more power, single-light power 4mA, all bright 42mA.
– Suitable for lithium batteries, lead-acid batteries and other power batteries need to be displayed
– Power adjustable display range for the battery discharge curve of a scientific setting, direct support:single lithium 1S (4.2V) ~ 4S (16.8V), lead acid 6V ~ 12V, NiMH 3.6V ~ 18V, nickel-cadmium batteries 3.6V ~ 18V
Parameter
Power:bar display full brightness 42ma, single light shows 4ma
Measuring range:the battery inside the common 2.4-20v
Color:green
Display:Multi-light bar display or a single light dot display
pcb board size:45 x 14 mm
Display Mode A / P:full brightness linear / single lamp lattice mode switch, the default is a linear model, the board set aside a switch pad, even with soldering pads can be turned into full light linear mode, no welding is the point like single light display
A variety of high and low voltage battery display range adjustment
1. Lithium battery
After the completion of a single lithium battery discharge voltage is 3V, when fully charged 4.2V;
1S correspond to 3V (first light) to 4.2V (tenth lights);
2S corresponds to 6V (first light) to 8.4V (tenth lights);
3S correspond to 9V (first light) to 12.6V (tenth lights);
4S correspond to 12V (first light) to 16.8V (tenth lights);
Other series voltage and so on.
2. Lead Acid Batteries
6V or 12V lead-acid battery is generally
6V corresponds to 4.8V (first red light) to 6.75V (tenth lights);
12V corresponds to 9.6V (first red light) to 13.5V (tenth lights);
The module according to the above standard battery discharge range design, can accurately reflect the battery, so that users can readily observe the status of the battery.
Adjustment methods
Equipment needed:an adjustable power supply, precision accuracy of the decisions of the panel display. Watches word screwdriver.
Case in single 3.7V lithium, 3V is less low-end power, 4.2V for the full power of high-end.
1. the adjustable power supply voltage to the desired voltage display high 4.2v, connect this board, this time there are two results:one is not bright, one is all bright or light a few. This time slow adjustment plate 503 (50k) potentiometer until the LED strip just lit up the whole. Several light does not shine or counterclockwise to adjust, when full light clockwise.
2. the adjustable power supply voltage to the low end of the desired 3V. Adjustment board 502 (5K) potentiometer to just light a LED, does not light clockwise adjustment, several or all bright light counterclockwise.
3. patiently repeating the first step two. Usually 2 times to adjust to the desired display range.
Note
To adjust their voltage, according to the method of adjusting the order, to emphasize high-end, then adjust the low end.Red then positive, then negative black, must not be reversed, this module is the maximum limit voltage DC 20V, please use anti-static welding or soldering station pull electric heat welding.
Package Included
3 x LM3914 Battery Capacity Tester Display Board
Weight | 0.024 kg |
---|
Customers Also Viewed
5Pcs MQ135 MQ-135 Air Quality Sensor Hazardous Gas Detection Module for Detect Ammonia Sulfides Benzene Vapors
$15.90Sensor & Detector ModuleAdd to cartnullOverview1. The gas sensitive material used in the MQ135 gas sensor is tin dioxide (SnO2) with lower conductivity in clean air. When there is a polluting gas in the environment where the sensor is located, the conductivity of the sensor increases as the concentration of the polluting gas in the air increases. The change in …
5Pcs A87 4 Channel Optocoupler Isolation Module High And Low Level Expansion Board
$17.08Other Module BoardAdd to cartDescription 1. Function:Use the low level to control the high level. Such as the use of single-chip 3V or 5V voltage control 9V or 12v voltage. 2. HVCC should not exceed 24V. Output OUT1 / OUT2 / OUT3 / OUT4 output current equal to HVCC / 5.1K, absorption current 500ma. 3. This module uses TLP281 …
5Pcs A87 4 Channel Optocoupler Isolation Module High And Low Level Expansion BoardRead More
Fuel Pump Holder Mount Rubber for Eberspacher Webasto Heater D2 D4 D5
$20.24Laboratory Heating EquipmentsAdd to cartSpecification1. Material:Rubber+Metal2. Color:Black3. Contains fuel pump holder, mounting bolts, nut and fixing screw.4. High-quility, stable characteristics, high reliability.5. Suitable for Eberspacher Webasto heater D2/D4/D5.Package Included1 x Fuel pump holder Set
20pcs TB293 7W USB DC to DC 5V to 6V 9V 12V 15V Adjustable Output Converter Step Up Boost Module for LED Motor Fan
$88.78Boost & Buck ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionInput voltage:3~6VOutput voltage:6-15.5VMaximum input current:1.4ALong-term work Current:1AConversion efficiency:79-90% Input Interface:USB MaleOuput Interface:2 PIN XH2.54 Power:Maximum 7WWorking frequency:1.0MHzOperating temperature:-40 to +85 →Size:47.5 x 16mmApplications6-15V Low Power Motor6-15V LED LightingHard drive power supply9V 12V …
CBB61 3Pcs 18UF Starting Capacitance 450V AC Fan Capacitor CBB Motor Run Capacitor
$22.48Module ComponentsAdd to cartFeatures1.Use polypropylene film with excellent electrical properties as the medium, and vaporize the metallized layer as the electrode under high vacuum conditions; 2.Use High-quality epoxy resin potting material is filled and sealed; the product has stable capacity, low loss, high pressure resistance, and good self-healing.3.Application:air conditioners, refrigerators, washing machines, electric fans, ovens, etc.SpecificationModel:CBB61Shell Material:ABSLine length:10cmShell …
CBB61 3Pcs 18UF Starting Capacitance 450V AC Fan Capacitor CBB Motor Run CapacitorRead More
42V 2A Adapter Charger for 2 Wheel Smart Self Balance Schooter 36V Li-ion Lithium Battery
$36.44Electrical DC Power SupplyAdd to cartSpecificationsName:Lithium Battery ChargerModel:JC4202Charging battery type:Li-ion Material:Plastic and MetalColor:BlackCharger size:117 x 52 x 33mm(L*W*H)Input voltage:AC100-240VInput voltage range(V):50/60HzOutput voltage(V):DC 42V 2000mAOutput terminal:DC socket, 5.5/2.1mmPolarity:Inside:“+ Inch, Outside:“- InchFeaturesHigh security, retardant. More energy, lower standby power consumption.Universal 6.5inch, 7inch, 8inch, 10inch two-wheel balance car.Two models can not be charged:millet balance car, wheelbarrow.Longer life, widely used in Electronic products,digital products,optical …
42V 2A Adapter Charger for 2 Wheel Smart Self Balance Schooter 36V Li-ion Lithium BatteryRead More
Reviews
There are no reviews yet.