3pcs Green LM3914 Battery Capacity indicator Module LED Power Level Tester Display Board
$15.82
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
– This is a DIY kits,need buyer to assemble it.
– Power display is to take some voltage, perform simulations show the percentage of segments, such as 3.7V lithium battery, take the lower voltage 3V, the upper limit of 4.2V, 4.2-3 = 1.2V, the voltage difference between the lower limit of 1.2V, is the battery Analog power up
– LM3914 can accurately detect an analog voltage, and 10 LED display, display dot mode LED is lit 10 one, or in a stripe pattern individually lit LED
– Display Description:Displays the battery voltage between the lower limit of 10 files showed that representatives of each of the lights 10% charge displays, on behalf of 10 lights display charge 0% -100% range; you can also change the single light display, is displayed only a light, more power, single-light power 4mA, all bright 42mA.
– Suitable for lithium batteries, lead-acid batteries and other power batteries need to be displayed
– Power adjustable display range for the battery discharge curve of a scientific setting, direct support:single lithium 1S (4.2V) ~ 4S (16.8V), lead acid 6V ~ 12V, NiMH 3.6V ~ 18V, nickel-cadmium batteries 3.6V ~ 18V
Parameter
Power:bar display full brightness 42ma, single light shows 4ma
Measuring range:the battery inside the common 2.4-20v
Color:green
Display:Multi-light bar display or a single light dot display
pcb board size:45 x 14 mm
Display Mode A / P:full brightness linear / single lamp lattice mode switch, the default is a linear model, the board set aside a switch pad, even with soldering pads can be turned into full light linear mode, no welding is the point like single light display
A variety of high and low voltage battery display range adjustment
1. Lithium battery
After the completion of a single lithium battery discharge voltage is 3V, when fully charged 4.2V;
1S correspond to 3V (first light) to 4.2V (tenth lights);
2S corresponds to 6V (first light) to 8.4V (tenth lights);
3S correspond to 9V (first light) to 12.6V (tenth lights);
4S correspond to 12V (first light) to 16.8V (tenth lights);
Other series voltage and so on.
2. Lead Acid Batteries
6V or 12V lead-acid battery is generally
6V corresponds to 4.8V (first red light) to 6.75V (tenth lights);
12V corresponds to 9.6V (first red light) to 13.5V (tenth lights);
The module according to the above standard battery discharge range design, can accurately reflect the battery, so that users can readily observe the status of the battery.
Adjustment methods
Equipment needed:an adjustable power supply, precision accuracy of the decisions of the panel display. Watches word screwdriver.
Case in single 3.7V lithium, 3V is less low-end power, 4.2V for the full power of high-end.
1. the adjustable power supply voltage to the desired voltage display high 4.2v, connect this board, this time there are two results:one is not bright, one is all bright or light a few. This time slow adjustment plate 503 (50k) potentiometer until the LED strip just lit up the whole. Several light does not shine or counterclockwise to adjust, when full light clockwise.
2. the adjustable power supply voltage to the low end of the desired 3V. Adjustment board 502 (5K) potentiometer to just light a LED, does not light clockwise adjustment, several or all bright light counterclockwise.
3. patiently repeating the first step two. Usually 2 times to adjust to the desired display range.
Note
To adjust their voltage, according to the method of adjusting the order, to emphasize high-end, then adjust the low end.Red then positive, then negative black, must not be reversed, this module is the maximum limit voltage DC 20V, please use anti-static welding or soldering station pull electric heat welding.
Package Included
3 x LM3914 Battery Capacity Tester Display Board
Weight | 0.024 kg |
---|
Customers Also Viewed
5pcs Blue Light Mini 0.36 inch DC Current Meter DC0-999mA 4-30V Digital Display with Reverse Connection Protection Ammeter
$43.50Test & Measuring ModuleAdd to cartFeatureModule name:Current display module:Measurement accuracy:0.10%Refresh rate:About 200ms – times:Display method:Three digits 0. 36inch digital tubeMeasuring range:0A-999mA:Power supply range:4V-30VWorking current:Less than 8mA:Display color:BlueStorage temperature:-10°C to +65°C:Input resistance:50 milliohmsWeight:10g:Peripheral size:35*14*10mmWiring diagram– The ground wire of power supply end and measuring end of this ammeter adopts common ground design, that is, the ground wire of the power supply …
ISD1820 3-5V Recording Voice Module Recording And Playback Module Control Loop Play / Jog Play / Single Play
$8.73Sensor & Detector ModuleAdd to cartDescriptions Main chip:ISD1820 Size:38.5 x 42.8mm Operating voltage:DC 3~5V Features Easy to use 10 second voice recording and playback. High quality, natural voice restore. Can be used as a megaphone module. With loop play, jog play, single play function. control. This module can directly drive 8 ohm 0.5W small speakers. Power supply:3-5V, can be connected …
15pairs MC Connector Male Female 30A 1000V with 1pair MC Spanner Solar Panel Branch Series Connect Solar System
$42.07Electronic Accessories & SuppliesAdd to cartDescriptionRated voltage:1000 V Rated impulse voltage:1000 V Rated current:24A – 14 AWG (2.5mm2;), 30A – 12 & 10 AWG (4mm2; & 6mm2😉 Test voltage:6 kV (50 Hz) Protection grade:IP67 Insulation material:PC/PA Contact material:Copper, silver-plated Operating temperature:-40°C ~ +90°C Safety class:II Flame class:UL94-V0 Contact resistance:≤5mΩ Insertion / Withdrawal force:≤50N / ≥50N Suitable for cables:10, 12, 14 …
10Pcs TJA1050 CAN Controller interface Module BUS Driver interface Module
$22.99Driver ModuleAdd to cartDescription1. onboard TJA1050 CAN controller interface chip2. chip commonly used pin has led, convenient connection to use3. pin 5 v to power supply4. PCB board size:22 (mm) x11.5 (mm)Package included10 x TJA1050 CAN Controller Interface Module
3.3V RC522 Chip IC Card induction Module RFID Reader 13.56MHz 10Mbit/s
$10.92Card ReaderAdd to cartDescriptionRC522 chipMF RC522 is applied to the highly integrated read and write 13.56MHz contactless communication card chip, NXP launched by the company for the ‘table’ application of a low-voltage, low-cost, small size of the non-contact card chip to read and write, smart meters and portable handheld devices developed better choice. The MF RC522 use of …
3.3V RC522 Chip IC Card induction Module RFID Reader 13.56MHz 10Mbit/sRead More
Reviews
There are no reviews yet.