5pcs MP3 Bluetooth Decoder Board with Amplifier Wireless Audio Receiver Module for Transfer Speaker Modified Car
$42.81
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Support bluetooth version 4.2, 3.7-5V power supply, support automatic connection function
On-board stereo Class D power amplifier module, maximum output 5W+5W
Can be connected to two 4Ω 6Ω 8Ω 3W (5W) speakers
Parameter
Power Supply:3.7-5V
SNR:90dB
THD+N:-70dB
Crosstalk:-86dB
DNR:91dB
Support:A2DP/AVCTP/AVDTP/AVRCP/HFP
LOS:>15m
5V USB power supply:Universal Micro USB 5V power supply
3.7-5V power supply pad:realize external 3.7-5V lithium battery power supply modification
LED indicator:bluetooth mode blue light is on
3.5mm audio interface:standard 3.5mm interface, output stereo sound source, can be plugged into headphones, connected to power amplifier and other equipment
Left channel 5W output:5W power amplifier output of the left channel of the decoder board, connected to 4Ω6Ω8Ω 3W (5W) speaker
Right channel 5W output:decoder board right channel 5W power amplifier output, connect 4Ω 6Ω 8Ω 3W (5W) speaker
Precautions
1. The decoder board supplies 3.7-5V, if it is higher than 5.5V, the chip will be burned. Do not reverse connect the positive and negative poles of the power supply. The reverse will burn the chip.
2. It is recommended that the DC power supply be 5V1A; if the power supply is insufficient, the speaker sound will be small. When the power supply is seriously insufficient, the speaker will make a “dida Inch sound, even without sound.
3. It is recommended to connect 2 channels of 4 ohm 3W (5W) speakers; if you connect 2 ohm speakers, the power amplifier chip will heat up, causing the chip to burn.
4. Pay attention to static electricity protection. It is easy to generate static electricity when the weather is dry. In the process of using the user, please use the static electricity on the conductor to operate the decoder board to avoid the decoder chip being destroyed by static electricity.
5. During use, the mobile phone and the bluetooth decoder board should not be blocked by obstacles such as walls, and should be kept away from the metal shield as much as possible; blocking will reduce the transmission distance, and in serious cases, the music will be stuck and intermittent; the decoder board can be properly adjusted. The angle of the phone adjusts the optimal state of the connection signal.
Instructions
After the power is turned on, the blue indicator light is on and enters the Bluetooth mode; after the “Beep Inch is broadcast, the pairing mode is entered to wait for pairing; the mobile phone Bluetooth searches for “XY-BT Inch (decoding board device name), and clicks “XY-BT Inch. Connect, play the inchBeepinch after the connection is successful, you can play the phone music; after the Bluetooth is disconnected, the decoder board prepares for the next pairing, and plays the inchBeepinch and enters the pairing mode to wait for pairing.
Package includes
5 x MP3 bluetooth Decoder Board
Weight | 0.04 kg |
---|
Customers Also Viewed
3Pcs CJMCU-219 INA219 I2C Bi-directional Current / Power Monitor Sensor Module
$24.62Sensor & Detector ModuleAdd to cart3Pcs CJMCU-219 INA219 I2C Bi-directional Current / Power Monitor Sensor ModuleDescriptionCJMCU-219 module is a with I2C interface Bidirectional current / power monitor integrated circuit (IC), and further expand the energy-saving electronic products TI camp. INA219 with the industry’s highest accuracy and smallest size, not only to monitor the voltage drop across a shunt resistor on …
3Pcs CJMCU-219 INA219 I2C Bi-directional Current / Power Monitor Sensor ModuleRead More
GDCPH 16V83F Super Farah Capacitor Automotive Electronic Rectifier 2.7v500F Screw Hole Large Capacity Capacitor
$90.34Electronic Accessories & SuppliesAdd to cartDescriptionThis product can be used in electronic devices such as:RAM, smart three-meter, motor drive, clock circuit, toys, CMOS power failure protection, digital camera, hand-cranked rechargeable flashlight, PDA and other fields as a backup power supply.SpecificationBrand:GDCPHModel:16V83FCapacity:83FRated voltage:16 VSize:231*35*65mmPitch:7mmPackage included1 x capacitor
5pcs PWM DC Motor Governor 5V-16V 10A Speed Switch LED Dimmer Speed Controller
$22.64Motor PWM Speed ControllerAdd to cartParameterMaximum voltage:16VMinimum voltage:5VContinuous current:10AShort circuit maximum current:20A (less than 10 seconds)Speed control mode:PWM stepless speed regulation, can also be used to adjust the lightControl mode:speed control potentiometer (clockwise open, continue to rotate clockwise from 1% to 99%)Duty cycle:0%-99% (0% position is the leftmost state of the potentiometer).When the current is on, 0.002A (there is no …
5pcs PWM DC Motor Governor 5V-16V 10A Speed Switch LED Dimmer Speed ControllerRead More
3pcs 7W 9W 12W 15W LED Non Isolated Modulation Light External Driver Power Supply AC90-265V Constant Current Thyristor Dimming Module
$17.33Driver ModuleAdd to cartSpecificationsInput voltage:AC90-265VOutput voltage:DC21-48VOutput current:300mA(adjustable)Product size:68*34*22mmWorking temperature:Ta:50 TC:75Efficiency:≥80%Power factor:0.6Product application:spotlight PAR light / bulb light / candle light / etc.Package Included3 x 7W 9W 12W 15W LED Non Isolated Modulation Light External Driver
5Set Mini Emergency Hand-cranked Dynamotor Charger Portable Hand-cranked Generator 3V 5V for Diy Electronic Production with Clip Lines
$37.08Electronic Accessories & SuppliesAdd to cartDescriptionUnderstand the gear’s speed-increasing transmission conversion and the principle of electric energy generation, and cultivate the manual and brain skills, which is very suitable for manual classes in schools or for adults and children to play together!When shaking slowly for one second or more, the generating voltage can easily reach 3V, and it is easy …
APPJ Single End 6J1 + FU32 Tube Amplifier Board Class A Power AMP Hifi Vintage Audio Assembled Board
$182.24Amplifier BoardAdd to cartNew update:The appearance is updated from March 6, 2021.SpecificationsAssembled, solder freeDriver tubes:6J1x2PCSPower tubes:FU32x2PCSPower output:3W+3W @8ohmFrequency response:30-40KHz(+-1dB)Input sensitivity:550mVSignal-to noise-ratio:-80dB/3WInput power:85-264VACPower consumption:40WInput impedance:10K ohmOutput impedance:16ohm,8ohm,6ohm,4ohmPackage dimension:12*21*17cmPackage weigth:1.5KGNoteThe self-made shell must be opened with sufficient heat dissipation holes, preferably 50% of the shell area, at least 30%, otherwise it will affect the service life.Package Included1 x End 6J1 …
Caturda C2707 4Channel I2C interface Current Voltage Power Monitoring Module for Raspberry Pi
$39.03Raspberry Pi & Orange PiAdd to cartSpecificationsCurrent and power monitor for Raspberry Pi, 4 channels, can monitor the current, voltage, power and voltage across the sampling resistor through the I2C/SMBus interfaceFeaturesRaspberry Pi 40pin GPIO Interface, fit for Raspberry Pi all SeriesSupport 4 Channel I2C/SMBus CommunicationOnboard 1ohm 1% Resistance.Monitor 3.2A Bidirectional current12bit ADC Measuring 0-26V VoltageWorking Voltage:3.3V/5VInterface:I2C/SMBusResistance:1ohm 1%Voltage Range:0-26VCurrent:÷3.2ASize:65mmx30mmPackage Included1* Monitoring Module
Reviews
There are no reviews yet.