0.36 inch 3-in-1 Time + Temperature + Voltage Meter Display with NTC DC7-30V Voltmeter Electronic Watch Clock Digital Tube
$19.84
Color. Yellow / Color. Red / Color. Blue / Color. Green /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Reverse does not burn, the number does not shake
Digital tube:36 x 14 x 13mm (L x W x H)
Board:35 x 16mm
Power supply:7-30V, high brightness LED digital tube
Color:red, blue, green, yellow (optional)
4 display modes:1:Display time only 2:Display temperature only 3:Display voltage only 4:Time temperature voltage is alternately displayed.
Note
1. The difference between 33v and 200v is that the maximum measurement voltage is different. Car battery 12v can select 33v, and electric vehicle can select 200v.
2. Three-in-one table temperature sensor line defaults 1 meter, can not be extended, will affect the accuracy of time after extension, please think twice.
Voltage:R ange:0-33V, error +-0.02V
R ange:0-200V, error +-0.1V
Power supply 7-30V. Two r anges are available.
Temperature:-50 ° C ~ 125 ° C, NTC probe, extension line 1 m, waterproof. Accuracy 0.0625, no calibration required.
Time:24-hour system, clock chip accuracy of 15ppm, with power off memory function, accurate time.
Key setting
Button 1
Short press to select the clock, second, voltage, temperature display mode;
Press and hold to display ALL, enter the time—voltage—temperature tracking mode, with an interval of 5 seconds. Press the button again to exit the mode.
Button 2
Short press to adjust time, minute (flashing), and press one button to adjust. Press button 2 again to exit the adjustment mode.
Remarks:Adjust “minutes Inch, the clock will stop after exiting, and press the button to start walking.
Package includes
1 x Voltmeter
Weight | 0.01 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.