3Pcs PWM Stepper Motor Driver Simple Controller Speed Controller forward and Reverse Control Pulse Generation
$63.41
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product name:simple controller
Model:CW-S01
It can generate PWM signal. There is a jumper on the board, which can be set and selected. By default, it is set to generate pulse frequency signal.
Product Manual
1. When the controller generates a pulse frequency signal, it can supply a stepper driver as a signal. To control the stepper motor, it must be equipped with a driver.
(This simple controller + stepper driver + stepper motor + DC power supply can form a simple control platform.)
2. The controller can generate a pulse frequency signal or a PWM pulse width signal. There is a jumper on the board, which can be set and selected. By default, they are set to generate pulse frequency signals.
REQ is to generate pulse frequency signal
PWM is to generate PWM signal
3. When the controller generates a pulse frequency signal, there are three types of high, medium and low frequency signals that can be selected with a jumper. The frequency parameters are approximately
High:5.8KHZ-127KHZ
Middle:590HZ-15.8KHZ
Low:82HZ-2.3KHZ,
Frequency measurement:You can measure PUL and common cathode (GND) two ports.
4. The power supply has 2 sets of power input, and 2 sets only need to connect one set of power supply. It is recommended to use a power supply of more than 15V. Connect to the power supply of the 2-bit terminal, do not connect the positive and negative.
One group is the power supply connected to DC 15-160VDC, and the recommended operating voltage is 15-80VDC.
The other group is 5-12VDC. When used with the driver, it is recommended to use a minimum of 12V, not a 5V power supply, not at 5V, the power supply is connected to ‘5-12V input’, and the power supply is connected to the ‘common cathode’.
5. Length * width * height:about 73 * 51 * 37MM
Controller:Driver
PUL:Pulse negative terminal (PUL-)
DIR:Negative direction (DIR-)
ENA:Enable negative terminal (EN-)
Common anode:Common port (COM or + 5V or PUL + DIR + EN + are connected at the same time)
Common cathode:Common ground (GND)
5-12V input+:The positive end of the 12V power supply is generally empty.It is recommended to use a power supply of more than 15V.
Example:Wiring with the common anode of the driver. If it is driven by 6 signal lines, the + 5V common terminals of the three signals must be connected in parallel to form a line and all connected to the common anode terminal.
Package includes
3 x Controller
Note
1. If you want to use the start or stop function, the ENA enable terminal on the controller must be connected to the driver with a common cathode or a common anode.
2. The forward and reverse rotation and the start and stop of the motor can be controlled by pressing the button.
3. The speed of the motor can be controlled by adjusting the potentiometer to change the frequency.
4. The switch of the motor’s forward / reverse rotation and start / stop is an ordinary switch with self-locking.
5. If you want to connect the switches that control forward and reverse, and open or stop, to the chassis panel, you can refer to the following instructions.
Change the forward and reverse, the start-stop button into a lead-wire switch, see the pin position on the back
1. When the common cathode is connected, the 1 and 3 pins are processed, and the 2, 4, 5, and 6 pins are empty
2. When the common anode is connected, the 1 and 2 pins are processed, and the 3, 4, 5, and 6 pins are empty
The two switches are the same pin lead.
Weight | 0.141 kg |
---|
Customers Also Viewed
KXYC-DY-CM5S-03 5S 21V Power Tool Protection Board 18.5V Lithium Electric Drill Protection Board
$10.11Battery Protection ModuleAdd to cartProduct parametersModel:KXYC-DY-CM5S-03Overcharge Voltage Range:4.25V ÷ 0.05VOverpressure Voltage Range:2.85V ÷ 0.05VUpper Limit Operating Current:18AUpper Limit Instantaneous Current:40AQuiescent CurrentCharging Voltage:21VSize:90.3 * 62 * 16mmWeight:28.2gBasic Functions:Overcharge, overdischarge, short circuit, overcurrent protectionPackage included1 x 5S Lithium Battery Protection Board
AS50A1 1.4W 5V Solar Panel Pump Fountain Pump Kit Pool Pond Watering Submersible Petals Fountain
$46.56Electrical Pump & ValveAdd to cartPackage included1 * Solar Panel with Pump4 * Fountain Nozzle1 * Nozzle Base1 * Connection Head1 * Outlet1 * Filter Sponge1 * User Manual (English)SpecificationsColor:BlackSolar Panel Material:Monocrystalline PET Laminated, FR-4 Glass Fiber BoardSolar Panel Voltage/Power:5V/1.4WBrushless Pump:Power Range:0.6~1.1W Input Voltage Range:DC 4.5-9V Starting Voltage:DC 4V No-load Voltage:DC 3V Load Current:165±15m Max. Flow:160±L/H Max Water Height:30~50cm Max …
3pcs 1.8 inch TFT LCD Display Module Color Screen SPI Serial Port 128*160
$32.97Display ScreenAdd to cartMore information, please check here:>>>Click here to openFeatureSize:1.8 inch SPI serial busResolution:128*160Driver IC:ST77351. Support various MCU in-line without any wiring2. Integrated voltage regulator IC, support 5V or 3.3V power supply3. On-board level conversion scheme, truly compatible with 5V/3.3V IO level, supporting various microcontroller IO connections4. Integrated SD card expansion circuit,5. Reserve SPI FLASH font circuit …
3pcs 1.8 inch TFT LCD Display Module Color Screen SPI Serial Port 128*160Read More
LED Light String Kit for Lego 42096 Technic for Porsche 911 RSR Bricks Toy Plastic
$40.01DIY Electronic KitsAdd to cartType Basic version Light Color White / Type Basic version Light Color Warm White / Type Upgrade Light Color White / Type Upgrade Light Color Warm White / Type Remote and Bulb Socket 220V Light Color White / Type Remote and Bulb Socket 220V Light Color Warm White
4G DTU Module Compatible with GPRS/3G Wireless DTU Data Transmission Equipment RS485/232 Transparent Transmission G780 V2
$169.65Network ModuleAdd to cartFeatureSheet:Project:IndexWireless parameters:Wireless standard:TDD-LTEFDD-LTEWCDMATD-SCDMAGSM/GPRS/EDGEStandard frequency band:TDD-LTE:Band 38/39/40/41FDD-LTE:Band 1/3/8WCDMA:Band 1/8TD-SCDMA:Band34/39GSM/GPRS/EDGE:Band3/8Transmit power:TDD-LTE:+23dBm(Power class 3)FDD-LTE:+23dBm(Power class 3)WCDMA:+23dBm(Power class 3)TD-SCDMA:+24dBm(Power class 2)GSM Band8:+33dBm(Power class 4)GSM Band3:+30dBm(Power class 1)Specifications:TDD-LTE:3GPP R9 CAT4 downlink 150 Mbps, uplink 50 MbpsFDD-LTE:3GPP R9 CAT4 downlink 150 Mbps, uplink 50 MbpsWCDMA:HSPA+ Downstream rate 21 Mbps Upstream rate 5.76 MbpsTD-SCDMA:3GPP R9 downlink rate 2.8 Mbps uplink rate 2.2 …
72 IR CUT 1MP OV9732 Mini Cmos Camera Module USB 2.0 Output
$40.45Other Module BoardAdd to cart>>>Manual:Click here to openSpecificationsTemperature (Stable Image):0C to 50CAssembly technique:SMT (ROSH)Focus:FixedResolution:600LW/PH (Center)PCB printing ink:Blackinterface:USB 2.0Power suuply:USB bus powersupply voltage:DC 5V÷5%Maximum Power consumption:840mWOperating system request:Win XP/win 7、8 / vista /android 4.0/ mac /Linux with uvcSensor:OV9732 (1/4” )Seneor Package:CSP,Bare DieMaximum resolution:1280*720Sensitivity:2066mV /(lux-sec)Pixel Size:3┢m x 3┢mMaximum Image Transfer RateMJPEG 320×180 30FPS / YUY2 320×240 20FPSMJPEG 320×240 30FPS / YUY2 …
72 IR CUT 1MP OV9732 Mini Cmos Camera Module USB 2.0 OutputRead More
Reviews
There are no reviews yet.