3Pcs PWM Stepper Motor Driver Simple Controller Speed Controller forward and Reverse Control Pulse Generation
$63.41
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product name:simple controller
Model:CW-S01
It can generate PWM signal. There is a jumper on the board, which can be set and selected. By default, it is set to generate pulse frequency signal.
Product Manual
1. When the controller generates a pulse frequency signal, it can supply a stepper driver as a signal. To control the stepper motor, it must be equipped with a driver.
(This simple controller + stepper driver + stepper motor + DC power supply can form a simple control platform.)
2. The controller can generate a pulse frequency signal or a PWM pulse width signal. There is a jumper on the board, which can be set and selected. By default, they are set to generate pulse frequency signals.
REQ is to generate pulse frequency signal
PWM is to generate PWM signal
3. When the controller generates a pulse frequency signal, there are three types of high, medium and low frequency signals that can be selected with a jumper. The frequency parameters are approximately
High:5.8KHZ-127KHZ
Middle:590HZ-15.8KHZ
Low:82HZ-2.3KHZ,
Frequency measurement:You can measure PUL and common cathode (GND) two ports.
4. The power supply has 2 sets of power input, and 2 sets only need to connect one set of power supply. It is recommended to use a power supply of more than 15V. Connect to the power supply of the 2-bit terminal, do not connect the positive and negative.
One group is the power supply connected to DC 15-160VDC, and the recommended operating voltage is 15-80VDC.
The other group is 5-12VDC. When used with the driver, it is recommended to use a minimum of 12V, not a 5V power supply, not at 5V, the power supply is connected to ‘5-12V input’, and the power supply is connected to the ‘common cathode’.
5. Length * width * height:about 73 * 51 * 37MM
Controller:Driver
PUL:Pulse negative terminal (PUL-)
DIR:Negative direction (DIR-)
ENA:Enable negative terminal (EN-)
Common anode:Common port (COM or + 5V or PUL + DIR + EN + are connected at the same time)
Common cathode:Common ground (GND)
5-12V input+:The positive end of the 12V power supply is generally empty.It is recommended to use a power supply of more than 15V.
Example:Wiring with the common anode of the driver. If it is driven by 6 signal lines, the + 5V common terminals of the three signals must be connected in parallel to form a line and all connected to the common anode terminal.
Package includes
3 x Controller
Note
1. If you want to use the start or stop function, the ENA enable terminal on the controller must be connected to the driver with a common cathode or a common anode.
2. The forward and reverse rotation and the start and stop of the motor can be controlled by pressing the button.
3. The speed of the motor can be controlled by adjusting the potentiometer to change the frequency.
4. The switch of the motor’s forward / reverse rotation and start / stop is an ordinary switch with self-locking.
5. If you want to connect the switches that control forward and reverse, and open or stop, to the chassis panel, you can refer to the following instructions.
Change the forward and reverse, the start-stop button into a lead-wire switch, see the pin position on the back
1. When the common cathode is connected, the 1 and 3 pins are processed, and the 2, 4, 5, and 6 pins are empty
2. When the common anode is connected, the 1 and 2 pins are processed, and the 3, 4, 5, and 6 pins are empty
The two switches are the same pin lead.
Weight | 0.141 kg |
---|
Customers Also Viewed
LILYGO TTGO T2 ESP32 0.95 OLED SD Card WiFi + bluetooth Module Development Board
$48.10Motherboard & Development BoardAdd to cartDescriptionFor more product information, please visit:https://github.com/LilyGO/TTGO-T2-ESP32Pin diagramPackage included1 x ESP32 T2(This product does not include battery)2 x Pin1 x Power Cable
50Pcs White Plastic for Rotary Taper Potentiometer Hole 6mm Knob
$8.17Electronic Accessories & SuppliesAdd to cartFeaturesPractical and convenient to use.Hat knobs are high quality, suitable stalk (round shaft) potentiometers.Suitable for 0.6cm shaft diameter potentiometer.SpecificationsColor:WhiteMaterial:PlasticQuantity:50 pcsSize:13 x 17mm (D x H)Inner hole diameter:6mmPackage included50 x Potentiometer Knob
BESTEP 1 Channel 5V Low Level Solid State Relay Module with Fuse 250V2A for Auduino
$6.55Relay ModuleAdd to cartDescription1. 5V solid state relay 240V 2A, output with resistance fuse 240V 2A.2. Size:25*34*25 (length * width * height) Net weight:13g3. Input power:5V DC (160MA)4. Input control signal voltage:(0-1.5V state low level relay ON) (2.5-5V state high level relay OFF)5. The blue KF301 terminal is more convenient to connect to the control line.Module interfaceInput sectionDC+:Connect …
BESTEP 1 Channel 5V Low Level Solid State Relay Module with Fuse 250V2A for AuduinoRead More
Liquid Transfer Siphon Pump Hand Gas Oil Water Fish Tank Battery Power Aquarium
$38.46Electrical Pump & ValveAdd to cartDescriptionFree Electric Battery Syphon Powered Pump – This Cordless water pump will move water for you!Just dip the end into the water and press the on switch, and this remarkable lightweight syphon pump will draw water through the pipe and pump it out of the hose.FeaturesIdeal for thousands of uses around the homeEmptying water buttsDraining …
Liquid Transfer Siphon Pump Hand Gas Oil Water Fish Tank Battery Power AquariumRead More
150pcs 1W Metal Film Resistor 1% 470 ohm
$11.53Electronic Accessories & SuppliesAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionPower:1WResistance value:470┯Resistance tolerance:÷1%Package included150 x Resistor
3PCS 315MHz 220V 10A 1CH Channel Wireless Relay Remote Control Switch Receiver
$19.84Relay ModuleAdd to cartSpecification1. Input Voltage:AC85V-AC220V2. RF Frequency:315MHZ3. RF Working mode:Super heterodyne receiver4. Receiver Sensitivity:-107dBm5. Remote Control Distance:>100 meter(In open environment)6. Decoding Way:MCU Software decoding7. Can store the number of remote control:328. Support remote control type:Fixed code, learning code9. Channel:1CH10 .Multiple working modes:(Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched)11. Wiring Method:Fixed wiring terminal12. Rated load:10A 250VAC / 10A 125VAC, 10A 30VDC …
3PCS 315MHz 220V 10A 1CH Channel Wireless Relay Remote Control Switch ReceiverRead More
DC 5V Portable USB Rechargeable Water Cooler Cooling Fan Desk Mini Air Conditioner
$34.41Solar CollectorsAdd to cartSpecificationsMode of operation:mechanicalRated power:5WRated voltage:DC5V 1.0AInput voltage:DC 5VInput current:0.5AWind speed:1 meter away from wind speed, greater than 4.0 m / sNoise:less than 36dBWater tank capacity:less than 1 literPower mode:USBBattery:three sections 5Switch type:normal buttonShaking his head:shaking his head up and downTiming function:no timingWind speed gear:1 fileAir supply type:natural windSize:11.5*11*13.5cmSTEPS FOR USAGE1. Unpack and remove the product;2. …
DC 5V Portable USB Rechargeable Water Cooler Cooling Fan Desk Mini Air ConditionerRead More
Reviews
There are no reviews yet.