3pcs 24V XH-W3002 Micro Digital thermostat High Precision Temperature Control Switch Heating and Cooling Accuracy 0.1
$34.33
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product Name:Microcomputer Temperature Controller
Product model:XH-W3002
Temperature range:-50~110°C
Temperature control range:-50~110°C
Temperature measurement accuracy:+-0.2 °C
Temperature control accuracy:+-0.1 °C
Temperature probe:NTC10K (B3950) 1 meter waterproof probe
Supply voltage:DC12V/DC24V/AC220V
Output power:DC24V:240W
Output type:direct output
Appearance size:60 x 45 x 31mm
Opening size:73mm (aperture 4mm)
Package includes
3 x Microcomputer Temperature Controller
Wiring
Key Description
Up key:Short press to display the starting temperature, long press to set the starting temperature.
Down button:short press to display the stop temperature, long press to set the stop temperature.
Shutdown button:Press to turn off the thermostat, and then press to turn on the thermostat.
Code:Code description:Setting range:Factory setting
P0:Starting temperature:-50~110°C:25
P1:Stop temperature:-50~110°C:40
P2:Temperature correction:-10~10°C:0°C
P3:Delayed start:0-10 minutes:0
P0. Set the startup temperature
Press the Setup button to enter the internal menu. The default display is P0. Press the Setup button again and set the desired startup temperature by pressing the up and down buttons.
P1. Set the stop temperature
Press the setup button to enter the internal menu, the display is P0, switch to P1 by the up and down keys, press the setup button again, and set the required stop temperature by the up and down buttons.
P2. Set the temperature correction
In the same way, enter the internal menu, switch to P2 by pressing the up and down buttons, press the setting button again, and set the required calibration temperature by pressing the up and down buttons. (Note:In the setting, if the detected temperature value is 0.5 °C larger than the actual temperature value, then the calibration temperature to be set is -0.5 ° C. If the detected value is 1 ° C smaller than the actual temperature value, the set calibration temperature is required. It is 1 ° C. Detection temperature + correction temperature = actual temperature.)
P3. Set the delay start
In the same way, enter the internal menu, switch to P3 by pressing the up and down buttons, press the setting button again, and set the required delay time by the up and down buttons, the unit is minute. (Note:Delay start is generally used for compressor refrigeration. If it is used in refrigerator freezer, this value needs to be set. According to compressor back pressure, the general setting is 3-6 minutes, if you are not using it for control or doesn’t need delay function, skip directly.
Instructions
Start temperature
Start temperature > stop temperature = cooling mode (output is connected to the cooling unit)
1. Connect the power supply and heating or cooling equipment according to the wiring diagram above (note the positive and negative poles)
2. Press and hold the up key to set the starting temperature. When the screen number flashes, press the up and down keys to set the starting temperature you want. After setting, wait for 5 seconds to brake the system.
3. Press and hold the key to set the stop temperature. When the screen number flashes, press the up and down keys to set the desired stop temperature. After setting, wait for 5 seconds to automatically save the data.
4. Restore the factory:Colleagues press and hold the up and down keys for 5 seconds, when the screen displays 888, the factory is restored.
5. Press the power off button to turn off the thermostat and press to turn on the thermostat.
Tips
888:In the case of power-on, press and hold the up and down keys for about 3 seconds, the digital tube displays 888, and automatically jumps to the detection temperature, that is, the factory settings are restored successfully.
LLL:Describe the sensor is open circuit, repair the sensor, or replace the sensor
HHH:The sensor is short circuit.
Weight | 0.165 kg |
---|
Customers Also Viewed
5Pcs MQ135 MQ-135 Air Quality Sensor Hazardous Gas Detection Module for Detect Ammonia Sulfides Benzene Vapors
$15.90Sensor & Detector ModuleAdd to cartnullOverview1. The gas sensitive material used in the MQ135 gas sensor is tin dioxide (SnO2) with lower conductivity in clean air. When there is a polluting gas in the environment where the sensor is located, the conductivity of the sensor increases as the concentration of the polluting gas in the air increases. The change in …
5Pcs A87 4 Channel Optocoupler Isolation Module High And Low Level Expansion Board
$17.08Other Module BoardAdd to cartDescription 1. Function:Use the low level to control the high level. Such as the use of single-chip 3V or 5V voltage control 9V or 12v voltage. 2. HVCC should not exceed 24V. Output OUT1 / OUT2 / OUT3 / OUT4 output current equal to HVCC / 5.1K, absorption current 500ma. 3. This module uses TLP281 …
5Pcs A87 4 Channel Optocoupler Isolation Module High And Low Level Expansion BoardRead More
Fuel Pump Holder Mount Rubber for Eberspacher Webasto Heater D2 D4 D5
$20.24Laboratory Heating EquipmentsAdd to cartSpecification1. Material:Rubber+Metal2. Color:Black3. Contains fuel pump holder, mounting bolts, nut and fixing screw.4. High-quility, stable characteristics, high reliability.5. Suitable for Eberspacher Webasto heater D2/D4/D5.Package Included1 x Fuel pump holder Set
20pcs TB293 7W USB DC to DC 5V to 6V 9V 12V 15V Adjustable Output Converter Step Up Boost Module for LED Motor Fan
$88.78Boost & Buck ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionInput voltage:3~6VOutput voltage:6-15.5VMaximum input current:1.4ALong-term work Current:1AConversion efficiency:79-90% Input Interface:USB MaleOuput Interface:2 PIN XH2.54 Power:Maximum 7WWorking frequency:1.0MHzOperating temperature:-40 to +85 →Size:47.5 x 16mmApplications6-15V Low Power Motor6-15V LED LightingHard drive power supply9V 12V …
CBB61 3Pcs 18UF Starting Capacitance 450V AC Fan Capacitor CBB Motor Run Capacitor
$22.48Module ComponentsAdd to cartFeatures1.Use polypropylene film with excellent electrical properties as the medium, and vaporize the metallized layer as the electrode under high vacuum conditions; 2.Use High-quality epoxy resin potting material is filled and sealed; the product has stable capacity, low loss, high pressure resistance, and good self-healing.3.Application:air conditioners, refrigerators, washing machines, electric fans, ovens, etc.SpecificationModel:CBB61Shell Material:ABSLine length:10cmShell …
CBB61 3Pcs 18UF Starting Capacitance 450V AC Fan Capacitor CBB Motor Run CapacitorRead More
42V 2A Adapter Charger for 2 Wheel Smart Self Balance Schooter 36V Li-ion Lithium Battery
$36.44Electrical DC Power SupplyAdd to cartSpecificationsName:Lithium Battery ChargerModel:JC4202Charging battery type:Li-ion Material:Plastic and MetalColor:BlackCharger size:117 x 52 x 33mm(L*W*H)Input voltage:AC100-240VInput voltage range(V):50/60HzOutput voltage(V):DC 42V 2000mAOutput terminal:DC socket, 5.5/2.1mmPolarity:Inside:“+ Inch, Outside:“- InchFeaturesHigh security, retardant. More energy, lower standby power consumption.Universal 6.5inch, 7inch, 8inch, 10inch two-wheel balance car.Two models can not be charged:millet balance car, wheelbarrow.Longer life, widely used in Electronic products,digital products,optical …
42V 2A Adapter Charger for 2 Wheel Smart Self Balance Schooter 36V Li-ion Lithium BatteryRead More
Reviews
There are no reviews yet.