5pcs 12V XH-W3002 Micro Digital thermostat High Precision Temperature Control Switch Heating and Cooling Accuracy 0.1
$51.07
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product Name:Microcomputer Temperature Controller
Product model:XH-W3002
Temperature range:-50~110°C
Temperature control range:-50~110°C
Temperature measurement accuracy:+-0.2 °C
Temperature control accuracy:+-0.1 °C
Temperature probe:NTC10K (B3950) 1 meter waterproof probe
Supply voltage:DC12V/DC24V/AC220V
Output power:DC12V:120W
Output type:direct output
Appearance size:60 x 45 x 31mm
Opening size:73mm (aperture 4mm)
Package includes
5 x Microcomputer Temperature Controller
Wiring
Key Description
Up key:Short press to display the starting temperature, long press to set the starting temperature.
Down button:short press to display the stop temperature, long press to set the stop temperature.
Shutdown button:Press to turn off the thermostat, and then press to turn on the thermostat.
Code:Code description:Setting range:Factory setting
P0:Starting temperature:-50~110°C:25
P1:Stop temperature:-50~110°C:40
P2:Temperature correction:-10~10°C:0°C
P3:Delayed start:0-10 minutes:0
P0. Set the startup temperature
Press the Setup button to enter the internal menu. The default display is P0. Press the Setup button again and set the desired startup temperature by pressing the up and down buttons.
P1. Set the stop temperature
Press the setup button to enter the internal menu, the display is P0, switch to P1 by the up and down keys, press the setup button again, and set the required stop temperature by the up and down buttons.
P2. Set the temperature correction
In the same way, enter the internal menu, switch to P2 by pressing the up and down buttons, press the setting button again, and set the required calibration temperature by pressing the up and down buttons. (Note:In the setting, if the detected temperature value is 0.5 °C larger than the actual temperature value, then the calibration temperature to be set is -0.5 ° C. If the detected value is 1 ° C smaller than the actual temperature value, the set calibration temperature is required. It is 1 ° C. Detection temperature + correction temperature = actual temperature.)
P3. Set the delay start
In the same way, enter the internal menu, switch to P3 by pressing the up and down buttons, press the setting button again, and set the required delay time by the up and down buttons, the unit is minute. (Note:Delay start is generally used for compressor refrigeration. If it is used in refrigerator freezer, this value needs to be set. According to compressor back pressure, the general setting is 3-6 minutes, if you are not using it for control or doesn’t need delay function, skip directly.
Instructions
Start temperature
Start temperature > stop temperature = cooling mode (output is connected to the cooling unit)
1. Connect the power supply and heating or cooling equipment according to the wiring diagram above (note the positive and negative poles)
2. Press and hold the up key to set the starting temperature. When the screen number flashes, press the up and down keys to set the starting temperature you want. After setting, wait for 5 seconds to brake the system.
3. Press and hold the key to set the stop temperature. When the screen number flashes, press the up and down keys to set the desired stop temperature. After setting, wait for 5 seconds to automatically save the data.
4. Restore the factory:Colleagues press and hold the up and down keys for 5 seconds, when the screen displays 888, the factory is restored.
5. Press the power off button to turn off the thermostat and press to turn on the thermostat.
Tips
888:In the case of power-on, press and hold the up and down keys for about 3 seconds, the digital tube displays 888, and automatically jumps to the detection temperature, that is, the factory settings are restored successfully.
LLL:Describe the sensor is open circuit, repair the sensor, or replace the sensor
HHH:The sensor is short circuit.
Weight | 0.27 kg |
---|
Customers Also Viewed
5Pcs GY-291 ADXL345 3-Axis Tilt Digital Gravity Acceleration Sensor Module for
$18.58Sensor & Detector ModuleAdd to cartFeatureAdxl345 digital three-axis acceleration of gravity tilt module Ar code iic / spiName:three-axis acceleration of gravity moduleChip:the adxl345Power supply:3-5VCommunication:the IIC / SPI communication protocolMeasuring range:± 2g ± 16gSchematics, manuals and reference documentation of relevant data51, the avr, the Ar microcontroller test code3-axis, ± 2g / ± 4g / ± 8g / ± 16gPackage includes5 x …
5Pcs GY-291 ADXL345 3-Axis Tilt Digital Gravity Acceleration Sensor Module forRead More
10pcs DC-DC 5-32V to 0.8-30V Power Supply Step Down Module Adjustable Buck Regulator 5A Constant LED Driver Battery Charging Voltage Board
$47.05Power Supply ModuleAdd to cartOverviewThe module uses high-quality chips, high efficiency (up to 95%), low heat generation, maximum 5A current, and TI’s op-amp control output current, making the overall output very stable.This module uses a low-ESR filter capacitor to reduce ripple voltage to 50mV!FeaturesModule nature:non-isolated buck moduleRectification mode:asynchronous rectificationWiring port:Input mode:IN+ input positive, IN- input negativeOutput mode:OUT+ output positive, …
5pcs 2 in 1 8W 3-24V to 24V Boost-Buck Dual Voltage Power Supply Module for ADC DAC LCD OP-AMP Speaker
$43.70Power Supply ModuleAdd to cartDescriptionInput voltage:3~24V, output:±24VMaximum output power:1-8W (For details, please see the description at the bottom or ask us for information.)Conversion efficiency:70-90%Quiescent current:3-4mAAccuracy:Positive voltage ±3%, Negative voltage ±5%8W DC-DC Boost-Buck Converter working frequency:400KHZ. Operating ambient temperature:-40~+85 Degrees CelsiusSize:42 x 24 x 15mmWeight:10gFeatureHigh efficiency up to 90%Built-in Frequency CompensationBuilt-in Soft-Start FunctionBuilt-in Thermal Shutdown FunctionBuilt-in Current Limit FunctionNote1. In …
LILYGO T-FH Female Header interface Gesture Sensor Module I2C for T-WATCH TTV T-Higrow
$9.06Sensor & Detector ModuleAdd to cartGithub Link:Click here to openProducts that can be used withT-WATCH SeriesT-Watch Upgraded Version Black Product ID 1551855 T-Watch Upgraded Version White Product ID 1551854 T-Watch Basic Version Product ID 1501125 T-Watch Basic Version with Silicone Shell Product ID 1722494 TTV:Product ID 1777327 T-Higrow:Product ID IntroductionThe LILYGO T-FH interface sensor is the abbreviation of female header. …
LILYGO T-FH Female Header interface Gesture Sensor Module I2C for T-WATCH TTV T-HigrowRead More
10pairs MC4 Connector+1pair Spanner Male Female 30A Cable Plug MC4 Connector Solar Panel Branch Series Connect Solar System
$28.42Electronic Accessories & SuppliesAdd to cartDescriptionItem no:MC4Rated voltage:1000 VRated impulse voltage:1000 VRated current:24A – 14 AWG (2.5mm2;), 30A – 12 & 10 AWG (4mm2; & 6mm2😉Test voltage:6 kV (50 Hz)Protection grade:IP67Insulation material:PC/PAContact material:Copper, silver-platedOperating temperature:-40°C ~ +90°CSafety class:IIFlame class:UL94-V0Contact resistance:≤5mΩInsertion / Withdrawal force:≤50N / ≥50NSuitable for cables:10, 12, 14 AWG (2.5mm2/4mm2/6mm2😉Locking system:Snap-inPackage included10pairs x MC4 Connectors1pair x MC4 Spanner
10Pcs 1 Key Press Film Switch Module Single Chip Microcomputer Extended Keyboard Electronic Switch Module
$12.56Other Module BoardAdd to cartSpecificationsProduct thickness:1.00mm (+0.02mm)Panel material:PCBack adhesive tape:white glueButton strength:280gTemperature:-15 ° C / +65 ° CCircuit material:0.125mm PET transparentButton package type:button planeButton package height:0.3mmKey life:>100,000 timesLoop resistanceConnector:2.54mm square hole with protective coverSize:23*20mmPackage Included10 x 1 Key Press Film Switch
Reviews
There are no reviews yet.