5pcs 12V XH-W3002 Micro Digital thermostat High Precision Temperature Control Switch Heating and Cooling Accuracy 0.1
$51.07
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product Name:Microcomputer Temperature Controller
Product model:XH-W3002
Temperature range:-50~110°C
Temperature control range:-50~110°C
Temperature measurement accuracy:+-0.2 °C
Temperature control accuracy:+-0.1 °C
Temperature probe:NTC10K (B3950) 1 meter waterproof probe
Supply voltage:DC12V/DC24V/AC220V
Output power:DC12V:120W
Output type:direct output
Appearance size:60 x 45 x 31mm
Opening size:73mm (aperture 4mm)
Package includes
5 x Microcomputer Temperature Controller
Wiring
Key Description
Up key:Short press to display the starting temperature, long press to set the starting temperature.
Down button:short press to display the stop temperature, long press to set the stop temperature.
Shutdown button:Press to turn off the thermostat, and then press to turn on the thermostat.
Code:Code description:Setting range:Factory setting
P0:Starting temperature:-50~110°C:25
P1:Stop temperature:-50~110°C:40
P2:Temperature correction:-10~10°C:0°C
P3:Delayed start:0-10 minutes:0
P0. Set the startup temperature
Press the Setup button to enter the internal menu. The default display is P0. Press the Setup button again and set the desired startup temperature by pressing the up and down buttons.
P1. Set the stop temperature
Press the setup button to enter the internal menu, the display is P0, switch to P1 by the up and down keys, press the setup button again, and set the required stop temperature by the up and down buttons.
P2. Set the temperature correction
In the same way, enter the internal menu, switch to P2 by pressing the up and down buttons, press the setting button again, and set the required calibration temperature by pressing the up and down buttons. (Note:In the setting, if the detected temperature value is 0.5 °C larger than the actual temperature value, then the calibration temperature to be set is -0.5 ° C. If the detected value is 1 ° C smaller than the actual temperature value, the set calibration temperature is required. It is 1 ° C. Detection temperature + correction temperature = actual temperature.)
P3. Set the delay start
In the same way, enter the internal menu, switch to P3 by pressing the up and down buttons, press the setting button again, and set the required delay time by the up and down buttons, the unit is minute. (Note:Delay start is generally used for compressor refrigeration. If it is used in refrigerator freezer, this value needs to be set. According to compressor back pressure, the general setting is 3-6 minutes, if you are not using it for control or doesn’t need delay function, skip directly.
Instructions
Start temperature
Start temperature > stop temperature = cooling mode (output is connected to the cooling unit)
1. Connect the power supply and heating or cooling equipment according to the wiring diagram above (note the positive and negative poles)
2. Press and hold the up key to set the starting temperature. When the screen number flashes, press the up and down keys to set the starting temperature you want. After setting, wait for 5 seconds to brake the system.
3. Press and hold the key to set the stop temperature. When the screen number flashes, press the up and down keys to set the desired stop temperature. After setting, wait for 5 seconds to automatically save the data.
4. Restore the factory:Colleagues press and hold the up and down keys for 5 seconds, when the screen displays 888, the factory is restored.
5. Press the power off button to turn off the thermostat and press to turn on the thermostat.
Tips
888:In the case of power-on, press and hold the up and down keys for about 3 seconds, the digital tube displays 888, and automatically jumps to the detection temperature, that is, the factory settings are restored successfully.
LLL:Describe the sensor is open circuit, repair the sensor, or replace the sensor
HHH:The sensor is short circuit.
Weight | 0.27 kg |
---|
Customers Also Viewed
1L Pressure Washer Snow Foam Lance Jet Car Washer for Driveways Roofs Siding Cars
$72.89Solar CollectorsAdd to cartSpecificationsMaterial:Reinforced Nylon,Brass,PEHD(High Density Polyethylene)Color:WhiteCapacity:1LPressure Range:2000 psi – 5000 psiMax.temperature:60℃Size:about 28 x 20 x 8cmFeatures-High pressure water machine body, brass fitting-Easy to use, Perfect for Driveways, Roofs, Siding, Cars, Trucks, SUVs-Save your time and energy-Rinses clean with no residue-Application:Fit For lavor Jet, accessories of pressure washers, for cleaning the car.Package Included1 x Snow Foam Lance
20pcs 3S Lithium Battery Pack Power indicator Board Electric Vehicle Battery Power
$50.94Other Module BoardAdd to cartInstructionsConnect the positive and negative terminals of the display board and connect them to the positive and negative terminals of the tested battery. The digital display shows the real-time battery power.Power parameters3S lithium battery, full charge 12.6VBattery voltage is greater than N X 3.7V, light 3 grid powerThe battery voltage is less than N X …
20pcs 3S Lithium Battery Pack Power indicator Board Electric Vehicle Battery PowerRead More
24mm Exhaust Silencer & 25mm Filter Exhaust and intake Pipe for Air Diesel Heater Accessories
$74.91Laboratory Heating EquipmentsAdd to cartSpecificationModel number:A74487Product name:Air Diesel Heater AccessoryCondition:NewQuantity:1Exhaust PipeColor:SilverMaterial:Stainless steelLength:60cm (before stretch)Diameter:24mmAir Intake PipeColor:BlackMaterial:Aluminum foilLength:50cm (before stretch)Diameter:25mmPackage Included1 x 24mm Exhaust Silencer1 x 25mm Filter1 x 24mm Exhaust Pipe1 x 25mm Air Intake Pipe4 x 25mm Clamps3 x Screws1 x Bracket
DIY Portable Battery Storage Spot Welding Machine PCB Circuit Board with Charge Control Module Welding Spot Welders Pen
$54.66Other Module BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.OverviewEquipped with 3.7-4.2V 5000mA lithium battery, discharge rate up to 70C, output capacity of about 300A, output through MOS tube, this energy is concentrated at the end of the welding pen, through …
Drip Irrigation Kits Plant Watering Kit with Distribution Tubing Hose Irrigation System Automatic Irrigation Set
$56.69SwitchesAdd to cartSpecificationOUTERDO Drip Irrigation Kits is a widely use Irrigation Set, we can use it in automatic watering flowers, plants, vegetables. It supplies the convenience to use a micro irrigation system which precisely customized watering for each plant. It can save your time, water and money. Easy to use, suitable for beginners to learn home gardening.Feature1. …
10pcs LCD1602 LCD Shell for 1602 Blue/Yellow And I2C 1602 Blue/Yellow Green Backlight LCD Module Case
$33.82Electronic Accessories & SuppliesAdd to cartDescription Screen size:2.5 inches Material:acrylic Application 1602 Blue Backlight LCD Display Module:https://www.hobbyant.com/1Pc-1602-Character-LCD-Display-Module-Blue-Backlight-p-978160.htmlrmmds=search 1602 Yellow Backlight LCD Display Module:https://www.hobbyant.com/1Pc-1602-Character-LCD-Display-Module-Yellow-Backlight-For–p-978155.htmlrmmds=search I2C 1602 Blue Backlight LCD Display Module:https://www.hobbyant.com/IIC-I2C-1602-Blue-Backlight-LCD-Display-Module-For–p-950726.htmlrmmds=search I2C 1602 Yellow Green Backlight LCD Display Module:https://www.hobbyant.com/IICI2C-1602-Yellow-Green-Backlight-LCD-Display-Module-For–p-950728.htmlrmmds=search Package included 10 x LCD1602 LCD shell
Reviews
There are no reviews yet.