3pcs 12V XH-W3002 Micro Digital thermostat High Precision Temperature Control Switch Heating and Cooling Accuracy 0.1
Shipping:Standard Shipping about 10-25 business days
Product Name:Microcomputer Temperature Controller
Temperature control range:-50~110°C
Temperature measurement accuracy:+-0.2 °C
Temperature control accuracy:+-0.1 °C
Temperature probe:NTC10K (B3950) 1 meter waterproof probe
Output type:direct output
Appearance size:60 x 45 x 31mm
Opening size:73mm (aperture 4mm)
3 x Microcomputer Temperature Controller
Up key:Short press to display the starting temperature, long press to set the starting temperature.
Down button:short press to display the stop temperature, long press to set the stop temperature.
Shutdown button:Press to turn off the thermostat, and then press to turn on the thermostat.
Code:Code description:Setting range:Factory setting
P3:Delayed start:0-10 minutes:0
P0. Set the startup temperature
Press the Setup button to enter the internal menu. The default display is P0. Press the Setup button again and set the desired startup temperature by pressing the up and down buttons.
P1. Set the stop temperature
Press the setup button to enter the internal menu, the display is P0, switch to P1 by the up and down keys, press the setup button again, and set the required stop temperature by the up and down buttons.
P2. Set the temperature correction
In the same way, enter the internal menu, switch to P2 by pressing the up and down buttons, press the setting button again, and set the required calibration temperature by pressing the up and down buttons. (Note:In the setting, if the detected temperature value is 0.5 °C larger than the actual temperature value, then the calibration temperature to be set is -0.5 ° C. If the detected value is 1 ° C smaller than the actual temperature value, the set calibration temperature is required. It is 1 ° C. Detection temperature + correction temperature = actual temperature.)
P3. Set the delay start
In the same way, enter the internal menu, switch to P3 by pressing the up and down buttons, press the setting button again, and set the required delay time by the up and down buttons, the unit is minute. (Note:Delay start is generally used for compressor refrigeration. If it is used in refrigerator freezer, this value needs to be set. According to compressor back pressure, the general setting is 3-6 minutes, if you are not using it for control or doesn’t need delay function, skip directly.
Start temperature > stop temperature = cooling mode (output is connected to the cooling unit)
1. Connect the power supply and heating or cooling equipment according to the wiring diagram above (note the positive and negative poles)
2. Press and hold the up key to set the starting temperature. When the screen number flashes, press the up and down keys to set the starting temperature you want. After setting, wait for 5 seconds to brake the system.
3. Press and hold the key to set the stop temperature. When the screen number flashes, press the up and down keys to set the desired stop temperature. After setting, wait for 5 seconds to automatically save the data.
4. Restore the factory:Colleagues press and hold the up and down keys for 5 seconds, when the screen displays 888, the factory is restored.
5. Press the power off button to turn off the thermostat and press to turn on the thermostat.
888:In the case of power-on, press and hold the up and down keys for about 3 seconds, the digital tube displays 888, and automatically jumps to the detection temperature, that is, the factory settings are restored successfully.
LLL:Describe the sensor is open circuit, repair the sensor, or replace the sensor
HHH:The sensor is short circuit.
Customers Also Viewed
Sliver Housing Aluminum Alloy Case Dual Mounting Plate Protective Shell Metal Enclosure fit for Raspberry Pi 4 Model B$15.08Raspberry Pi & Orange PiAdd to cart
The Raspberry Pi is not included, you could get it here:Raspberry Pi 4 Model BDescriptionThis is a Protective case designed specifically for Raspberry Pi 4 Model BThe product is made of aluminum and it is very strong,high hardness, pressure resistance, strong metallic luster, not easy to rust,it can perfectly protect your motherboard Aluminum alloy material …
10pcs 45MM Rotary Cutter Refill Blades Sewing Quilting fits Olfa Fiskars Cutters$34.49Switch AccessoriesAdd to cart
Description10pcs 45MM Rotary Cutter Refill Blades Sewing Quilting fits Olfa Fiskars CuttersSpecificationThe ideal cutting paper, fabric, leather, plastic, cloth, etc.For cutting at home, office, school, shop, especially the use of technology.Use more secure.Material:SteelSize:R45mmUse Tips1. Sharp knife, use caution, not to be out of reach of small children;2. If the long-term not in use , please …
Waveshare 2.13 inch E-ink Screen Display e-Paper Module SPI interface Partial Refresh Black Red White 212104$38.87Display ScreenAdd to cart
DocumentsManual:Click here to openCode:Click here to openSchematic:Click here to openDatasheet:Click here to openOverviewThis is an E-Ink display HAT, 2.13inch, 212×104 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice …
10Pcs Wemos DS18B20 Module for D1 Mini DS18B20 Temperature Measurement Sensor Module$26.79
FT232 FT232R FT232RL IC USB TO SERIAL UART 28-SSOP FTDI Chip$4.94
5pcs Smart Electronics CD74HC4067 16-Channel Analog Digital Multiplexer PCB Board Module Geekcreit for Arduino – products that work with official Arduino boards$6.32Other Module BoardAdd to cart
Specifications1.2V to 6V operation 2.“On Inch resistance:70 Ohms @ 4.5V 3.6ns break-before-make @ 4.5V 4.Wide operating temperature range:-50→ to 125→Features– This is a pcb board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.– This chip is like a rotary switch – it internally routes the common pinto one of 16 channel pins (CHANxx).– It works …