3pcs 12V XH-W3002 Micro Digital thermostat High Precision Temperature Control Switch Heating and Cooling Accuracy 0.1
$32.52
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product Name:Microcomputer Temperature Controller
Product model:XH-W3002
Temperature range:-50~110°C
Temperature control range:-50~110°C
Temperature measurement accuracy:+-0.2 °C
Temperature control accuracy:+-0.1 °C
Temperature probe:NTC10K (B3950) 1 meter waterproof probe
Supply voltage:DC12V/DC24V/AC220V
Output power:DC12V:120W
Output type:direct output
Appearance size:60 x 45 x 31mm
Opening size:73mm (aperture 4mm)
Package includes
3 x Microcomputer Temperature Controller
Wiring
Key Description
Up key:Short press to display the starting temperature, long press to set the starting temperature.
Down button:short press to display the stop temperature, long press to set the stop temperature.
Shutdown button:Press to turn off the thermostat, and then press to turn on the thermostat.
Code:Code description:Setting range:Factory setting
P0:Starting temperature:-50~110°C:25
P1:Stop temperature:-50~110°C:40
P2:Temperature correction:-10~10°C:0°C
P3:Delayed start:0-10 minutes:0
P0. Set the startup temperature
Press the Setup button to enter the internal menu. The default display is P0. Press the Setup button again and set the desired startup temperature by pressing the up and down buttons.
P1. Set the stop temperature
Press the setup button to enter the internal menu, the display is P0, switch to P1 by the up and down keys, press the setup button again, and set the required stop temperature by the up and down buttons.
P2. Set the temperature correction
In the same way, enter the internal menu, switch to P2 by pressing the up and down buttons, press the setting button again, and set the required calibration temperature by pressing the up and down buttons. (Note:In the setting, if the detected temperature value is 0.5 °C larger than the actual temperature value, then the calibration temperature to be set is -0.5 ° C. If the detected value is 1 ° C smaller than the actual temperature value, the set calibration temperature is required. It is 1 ° C. Detection temperature + correction temperature = actual temperature.)
P3. Set the delay start
In the same way, enter the internal menu, switch to P3 by pressing the up and down buttons, press the setting button again, and set the required delay time by the up and down buttons, the unit is minute. (Note:Delay start is generally used for compressor refrigeration. If it is used in refrigerator freezer, this value needs to be set. According to compressor back pressure, the general setting is 3-6 minutes, if you are not using it for control or doesn’t need delay function, skip directly.
Instructions
Start temperature
Start temperature > stop temperature = cooling mode (output is connected to the cooling unit)
1. Connect the power supply and heating or cooling equipment according to the wiring diagram above (note the positive and negative poles)
2. Press and hold the up key to set the starting temperature. When the screen number flashes, press the up and down keys to set the starting temperature you want. After setting, wait for 5 seconds to brake the system.
3. Press and hold the key to set the stop temperature. When the screen number flashes, press the up and down keys to set the desired stop temperature. After setting, wait for 5 seconds to automatically save the data.
4. Restore the factory:Colleagues press and hold the up and down keys for 5 seconds, when the screen displays 888, the factory is restored.
5. Press the power off button to turn off the thermostat and press to turn on the thermostat.
Tips
888:In the case of power-on, press and hold the up and down keys for about 3 seconds, the digital tube displays 888, and automatically jumps to the detection temperature, that is, the factory settings are restored successfully.
LLL:Describe the sensor is open circuit, repair the sensor, or replace the sensor
HHH:The sensor is short circuit.
Weight | 0.162 kg |
---|
Customers Also Viewed
300W Digital Amplifier Speaker Protection Board 2.1 Channel Relay Speaker Protection Module Boot Delay DC Protection
$15.30Relay ModuleAdd to cartFeatures1.With delay and DC protection (default 1.8V control, DC sensitivity can be adjusted)2. This common power DC protection board uses an optocoupler. Since the optocoupler has input and output isolation,3. Electrical signal transmission has the characteristics of unidirectionality, so it has good electrical insulation and anti-interference ability.4. Since the input end of the optocoupler belongs …
AB18 2SA1943/2SC5200 High Power 300W + 300W Dual Channel Class A/B Power Amplifier Board for Sound Speaker DIY
$125.17Amplifier BoardAdd to cartProduct description1. Using Japan imported original brand new 2SA1943/2SC52002. Electrolytic capacitor adopts imported electrolysis to ensure strong continuous power support.3. The resistor uses high-precision resistors, and the main circuit uses high-precision resistors with an accuracy of ÷ 1% to ensure a good signal-to-noise ratio for the whole machine.4. The PCB adopts 1.6mm thick double-sided sheet, …
5pcs DMP-L1 WiFi intelligent Lighting Module Built-in ESP ESP8285 WiFi Chip for Smart Home
$28.82Smart ModuleAdd to cartDescriptionThe core processor of DMP-L1 module adopts industrial chip ESP8285. The chip integrates an enhanced version of the Tensilica’s L106 Diamond Series 32-bit core processor in smaller size packages. ESP8285 has a complete Wi-Fi network function, which can be used independently from the controller. Its built-in cache memory greatly provides CPU performance.DMP-L1 module supports standard …
5pcs DMP-L1 WiFi intelligent Lighting Module Built-in ESP ESP8285 WiFi Chip for Smart HomeRead More
Wareshare 5.5 inch AMOLED HDMI Display Capacitive Touch Screen with Tempered Glass Support for NVIDIA Jetson Nano Raspberry Pi
$229.66Display ScreenAdd to cartDocumentsManual:Click here to openDatasheet:Click here to openSoftwarePanasoni SDFormatterWin32DiskImagerPuTTYOverviewThis product is a universal 5.5-inch HDMI display with 1080≠1920 ultra-clear resolution and a capacitive touch panel. Support for Raspberry Pi and various mini PCs, also as a computer monitor.Features5.5inch AMOLED, 1080×1920 resolution.Toughened glass capacitive touch panel.Supports popular mini PCs such as Raspberry Pi, as well as general …
5pcs 20x20x15mm DIY CPU IC Chip Heat Sink Extruded Cooler Aluminum Heat Sink
$4.36Electronic Accessories & SuppliesAdd to cartFeatureAluminum heat sinks for electronics, computers, electrical facilities, play a cooling effectSpecificationMaterials:AluminumSize:20*20*15mm (L*W*H)Color:SilverQty:5pcsPackage includes5 x CPU IC Chip Aluminum Heat Sink
5Pcs Yellow Backlight 1602 Character LCD Display Module
$24.89Display ScreenAdd to cartDescriptionLCD display module with yellow backlightWide viewing angle and high contrastBuilt-in industry standard HD44780 equivalent LCD controllerCommonly used in:copiers, fax machines, laser printers, industrial test equipment,networking equipment such as routers and storage devicesLCM type:CharactersCan display 2-lines X 16-charactersOperate with 5V DCModule dimension:80mm x 36mm x 12mmViewing area size:64.5mm x 16mmPackage included5 X LCD display module
Bathtub Caddy Bamboo Bath Tub Holder Bathroom Tray Glass Book Reading Rack Stand
$106.76FoamAdd to cartSpecificationMaterial:BambooColor:WoodSize:(L)X(W)X(H)105X22X4cm/41.34inchX8.66inchX1.57inch(appr.)Features1. Constructed from durable bamboo and metal supporting frame in excellent craftsmanship for many years use.2. Varnish processing on surface, lightweight and easy to operate.3. Books can be held with metal rack stably for reading when bathing.4. Books, phone, towl, and food can be placed on it for convenient reach.5. Its length is adjustable between …
Bathtub Caddy Bamboo Bath Tub Holder Bathroom Tray Glass Book Reading Rack StandRead More
Reviews
There are no reviews yet.