3pcs 24V XH-W1818 High Precision Microcomputer Temperature Controller Circular Digital Display Embedded thermostat
$42.69
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product Name:High precision microcomputer temperature controller
Product model:XH-W1818
Temperature range:-50~110°C
Resolution:0.1 ° C
Temperature control range:-50~110°C
Temperature control accuracy:1 ° C
Temperature probe:NTC10K (B3950) L=1M
Supply voltage:DC24V
Applicable environment:-25~55°C Humidity 50%-85%
Output type:10A relay output
Appearance size:diameter 80mm
Opening size:diameter 61mm/3mm
How to use
1. Connect the power supply and load according to the instructions. Please do not overpressure and overload.
2. Setting mode, long press SET button for 5 seconds will display P0. Press SET button shortly to set H to heating mode and C to cooling mode (up and down button to switch)
3. Set the stop temperature, press the SET button once to flash the screen, and then press the up and down keys to set the desired stop temperature.
4. Press and hold the SET button for 5 seconds to display P0, press the up and down keys to switch to P1, then press the SET button to set the difference back (press the up and down keys to adjust). If the heating mode H needs to control the temperature between 36-38 degrees , then the stop temperature is set to 38 degrees and the back difference is set to 2 (the highest temperature minus the lowest temperature)
5. Indicator light. SET light is on to indicate that the parameter is being set; OUT indicator is flashing to indicate the start delay, and always on to indicate the output.
Setting function description
Press SET button for 5 seconds to enter internal parameter setting, up and down button to switch P0-P7
Code:Code description:Setting:Factory setting
P0:Operating mode:C/H:H
P1:Backlash setting:0.1-30:2
P2:Set upper limit:Max. 110 ° C:110°C
P3:Set lower limit:Min. -50 ° C:-50°C
P4:Temperature correction:-10~10°C:0°C
P5:Delayed start:0-10 minutes:0
P6:High temperature alarm:-50~110°C:110°C
P7:Data lock:OFF/ON:OFF
P0:Heating and cooling mode H/C
The low temperature start is the heating mode, set to H. For example:the actual temperature is 21 ° C, the temperature needs to be controlled between 36-38 ° C, we set P0 to H heating mode.
The high temperature start is the cooling mode, set to C. For example:the actual temperature is 38 °C, and the temperature needs to be controlled between 24-26 °C. We set P0 to C cooling mode.
P1:Hysteresis setting
In heating mode (H):The measured value starts the output heating to the set value when the set value – hysteresis.
For example, to control an indoor temperature between 36 and 38 ° C, the actual temperature is 20 ° C, heating equipment is required to heat room, P0 is set to H, the stop temperature is set to 38 degrees, and P1 is set to 2. (High temperature – low temperature = hysteresis, 38-36 = 2)
In cooling mode (C):When the measured value >= set value + hysteresis, the output cooling is started until the set value stops.
For example, to control an indoor temperature between 24 and 26 ° C, the actual temperature is 36 ° C, the cooling equipment is required to cool room, P0 is set to C, the stop temperature is set to 24 degrees, and P1 is set to 2. (High temperature – low temperature = hysteresis, 26-24 = 2)
P2:Limit the maximum set value (non-temperature control setting):up to 110 °C
For example, if P2 is set to 50 °C, then when you set the operation, the maximum temperature can only be set to 50 °C.
P3:Limit the min. set value (non-temperature control setting):min. -50 °C
For example, if P2 is set to 20 °C, then when you set the operation, the set min. temperature can only be 20 °C. Since P2 is set to 50 degrees and P3 is set to 20 degrees, then you set is only Can be adjusted between 20~50 degrees.
P4:Temperature correction
When the measured temperature deviates from the standard temperature, this function can be used to correct the corrected temperature = temperature before correction + correction value
For example, the probe measurement temperature is 22.8 ° C, the standard temperature is 24.2 ° C, you need to increase the height by 1.4 degrees, set P4 = 1.4
For example, the probe measurement temperature is 26.31 ° C, the standard temperature is 23.5 ° C, it needs to be lowered by 2.8 degrees, and P4 = -2.8 can be set.
P5:Delay start time:0~10 minutes
When controlling the cooling of the compressor equipment, the delay time can be set as required. When the controller outputs, the equipment will not start immediately, and it needs to be started after the set delay time has elapsed. (Non-compressor control is set to 0)
P6:High temperature alarm
When the measured value is greater than the alarm value, the screen temperature flashes and the drip sound alarm, the output is forcibly turned off in the heating mode, and the output is not turned off in the cooling mode.
P7:Data lock function
Turn on the data lock, P7 is turned ON to save the current setting parameters without being changed. At this time, the setting temperature and function are invalid. If you need to modify, you need to enter P7 to turn OFF to turn off the data lock function.
Package includes
3 x High precision microcomputer temperature controller
Weight | 0.285 kg |
---|
Customers Also Viewed
30x30cm Stainless Steel 304 Cloth Filtration Woven Wire Screen 100 Mesh
$12.07Mesh & Wire ClothAdd to cartDescriptionStainless Steel 304 Filtration Woven Wire Screen is widely used in In filtering industrial paint, oil,water.SpecificationMesh Count:100Mesh Size Opening:150 MicronsColor:SilverMaterial:304 Stainless steelSize:30cm x 30cm/11.8inch x 11.8inchFeatures Stainless steel 100 mesh filtration 12inch x 12inch woven wire. Non-toxic, odorless harmless. Water resistant, high temperature, weather resistance. Widely used in In filtering industrial paint, oil,water. Type 304 …
30x30cm Stainless Steel 304 Cloth Filtration Woven Wire Screen 100 MeshRead More
Iron Black Vintage Steampunk 1/2 inch Stop Valve Light Switch with Wire Pass Thru
$34.41SwitchesAdd to cartVintage Steampunk 1/2inch Stop Valve Light Switch With Wire Pass ThruSpecificationMaterial:IronColor:Iron BlackSize(L*H):45 x 80 mmType:1/2inchFeaturesIncrease the retro charm.Easy to install, easy to clean.It works well with your table lamp.Simple and practical, increase home taste.The switch can handle 3 A at 120V or 5A at 12V.For plumbing lights or other lighting suitable for this type of …
Iron Black Vintage Steampunk 1/2 inch Stop Valve Light Switch with Wire Pass ThruRead More
5pcs ISD1820 3-5V Recording Voice Module Recording And Playback Module Control Loop Play / Jog Play / Single
$23.15Other Module BoardAdd to cartDescriptions Main chip:ISD1820 Size:38.5 x 42.8mm Operating voltage:DC 3~5V Features Easy to use 10 second voice recording and playback. High quality, natural voice restore. Can be used as a megaphone module. With loop play, jog play, single play function. control. This module can directly drive 8 ohm 0.5W small speakers. Power supply:3-5V, can be connected …
40 Pin 2.54mm Male Female SIL Socket Row Strip PCB Connector
$4.58Electronic Accessories & SuppliesAdd to cartDescriptionPitch:2.54mm Gender of Connector:Male & FemaleNumber of Pins:40 PinType of Row:Single-RowType of connector:StraightColor:BlackPackage include1 x 40Pin Single Row Straight Male1 x 40Pin Single Row Straight Female
3pcs Assembled Music Tesla Coil Mini Plasma Horn Speaker 15W 2A DC 15-24V Module
$39.72Other Module BoardAdd to cartDescriptionPower:15 WBoard size:4.0×8.0 mmPower input:DC 15-24V, current 2A, DC5.5 interface/row pinAudio input:3.5 sockets, can be connected to a mobile phone, mp3, computer audioPackage includes3 x Tesla CoilNotesTesla functional parameters:Voltage input 15-24V DC, current 2A, work when the heat is relatively large, so the heat sink is relatively hot! When using, be careful not to touch …
3pcs Assembled Music Tesla Coil Mini Plasma Horn Speaker 15W 2A DC 15-24V ModuleRead More
Reviews
There are no reviews yet.