3pcs 24V XH-W1818 High Precision Microcomputer Temperature Controller Circular Digital Display Embedded thermostat
$42.69
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product Name:High precision microcomputer temperature controller
Product model:XH-W1818
Temperature range:-50~110°C
Resolution:0.1 ° C
Temperature control range:-50~110°C
Temperature control accuracy:1 ° C
Temperature probe:NTC10K (B3950) L=1M
Supply voltage:DC24V
Applicable environment:-25~55°C Humidity 50%-85%
Output type:10A relay output
Appearance size:diameter 80mm
Opening size:diameter 61mm/3mm
How to use
1. Connect the power supply and load according to the instructions. Please do not overpressure and overload.
2. Setting mode, long press SET button for 5 seconds will display P0. Press SET button shortly to set H to heating mode and C to cooling mode (up and down button to switch)
3. Set the stop temperature, press the SET button once to flash the screen, and then press the up and down keys to set the desired stop temperature.
4. Press and hold the SET button for 5 seconds to display P0, press the up and down keys to switch to P1, then press the SET button to set the difference back (press the up and down keys to adjust). If the heating mode H needs to control the temperature between 36-38 degrees , then the stop temperature is set to 38 degrees and the back difference is set to 2 (the highest temperature minus the lowest temperature)
5. Indicator light. SET light is on to indicate that the parameter is being set; OUT indicator is flashing to indicate the start delay, and always on to indicate the output.
Setting function description
Press SET button for 5 seconds to enter internal parameter setting, up and down button to switch P0-P7
Code:Code description:Setting:Factory setting
P0:Operating mode:C/H:H
P1:Backlash setting:0.1-30:2
P2:Set upper limit:Max. 110 ° C:110°C
P3:Set lower limit:Min. -50 ° C:-50°C
P4:Temperature correction:-10~10°C:0°C
P5:Delayed start:0-10 minutes:0
P6:High temperature alarm:-50~110°C:110°C
P7:Data lock:OFF/ON:OFF
P0:Heating and cooling mode H/C
The low temperature start is the heating mode, set to H. For example:the actual temperature is 21 ° C, the temperature needs to be controlled between 36-38 ° C, we set P0 to H heating mode.
The high temperature start is the cooling mode, set to C. For example:the actual temperature is 38 °C, and the temperature needs to be controlled between 24-26 °C. We set P0 to C cooling mode.
P1:Hysteresis setting
In heating mode (H):The measured value starts the output heating to the set value when the set value – hysteresis.
For example, to control an indoor temperature between 36 and 38 ° C, the actual temperature is 20 ° C, heating equipment is required to heat room, P0 is set to H, the stop temperature is set to 38 degrees, and P1 is set to 2. (High temperature – low temperature = hysteresis, 38-36 = 2)
In cooling mode (C):When the measured value >= set value + hysteresis, the output cooling is started until the set value stops.
For example, to control an indoor temperature between 24 and 26 ° C, the actual temperature is 36 ° C, the cooling equipment is required to cool room, P0 is set to C, the stop temperature is set to 24 degrees, and P1 is set to 2. (High temperature – low temperature = hysteresis, 26-24 = 2)
P2:Limit the maximum set value (non-temperature control setting):up to 110 °C
For example, if P2 is set to 50 °C, then when you set the operation, the maximum temperature can only be set to 50 °C.
P3:Limit the min. set value (non-temperature control setting):min. -50 °C
For example, if P2 is set to 20 °C, then when you set the operation, the set min. temperature can only be 20 °C. Since P2 is set to 50 degrees and P3 is set to 20 degrees, then you set is only Can be adjusted between 20~50 degrees.
P4:Temperature correction
When the measured temperature deviates from the standard temperature, this function can be used to correct the corrected temperature = temperature before correction + correction value
For example, the probe measurement temperature is 22.8 ° C, the standard temperature is 24.2 ° C, you need to increase the height by 1.4 degrees, set P4 = 1.4
For example, the probe measurement temperature is 26.31 ° C, the standard temperature is 23.5 ° C, it needs to be lowered by 2.8 degrees, and P4 = -2.8 can be set.
P5:Delay start time:0~10 minutes
When controlling the cooling of the compressor equipment, the delay time can be set as required. When the controller outputs, the equipment will not start immediately, and it needs to be started after the set delay time has elapsed. (Non-compressor control is set to 0)
P6:High temperature alarm
When the measured value is greater than the alarm value, the screen temperature flashes and the drip sound alarm, the output is forcibly turned off in the heating mode, and the output is not turned off in the cooling mode.
P7:Data lock function
Turn on the data lock, P7 is turned ON to save the current setting parameters without being changed. At this time, the setting temperature and function are invalid. If you need to modify, you need to enter P7 to turn OFF to turn off the data lock function.
Package includes
3 x High precision microcomputer temperature controller
Weight | 0.285 kg |
---|
Customers Also Viewed
40x20x20cm Acrylic Display Box Clear Perspex Plastic Dustproof Base Transparent Case
$69.97DIY Electronic KitsAdd to cartFeatures– Made of acrylic material, clear and lightweight.– Simply design, very easy to install.– It is an wonderful display case, keep your collection figures tidy and clean.SpecificationsMaterial:AcrylicColor:TransparentSize:(L x W x H )21cm x 21cm x 41cm (8.3’x8.3’x16.1′)NOTEYou need to assemble the sheet into a box.Notice1. Please allow 1-3cm error due to manual measurement. Please make …
40x20x20cm Acrylic Display Box Clear Perspex Plastic Dustproof Base Transparent CaseRead More
3Pcs 1*40P Curved Needle Tin Plated Single Curved Needle 2.54MM Pin Connector
$2.15Module ComponentsAdd to cartSpecificationRoted Current:3.0AMPContocl Resistonce:20m┯ MaxWithstand Voltage:1000V AC/DCInsulation Resistance1000m┯ MinOperation Temperature:-40→ ~+105→Contact Material:BrassContact Plating:Tin over NiInsulator Material:Polyester(UL94V-0)Standard:PA6TMax.Processing Temp:230→ for 30-60 seconds(260→ for 10 seconds)Package included3 x 1*40P Single Curved Needle
3Pcs 315MHz XD-FST XD-RF-5V Wireless Transmitter Receiver Module Board Not Super-heterodyne
$6.80Smart ModuleAdd to cartTransmitter ModuleSpecificationWorking voltage:3V ~ 12VWorking current:20mA ~ 28mAStandby current:0mAWorking frequency:315MHzTransmitter distance:>500m (sensitivity can be above -103dBm if in wide field)Output power:16dBm (40mW)Transmitter rateModulation mode:OOK (AM)Working temperature:-10°C ~ +70°CSize:19 x 19 x 8mmFeatureStable performanceWider range of working voltagePinsPIN1 ATAD:data inputPIN2 VCC:power +PIN3 GND:power –ApplicationWireless calling system, burglar alarm, wireless data transmission, automated data acquisition systemReceiver Module …
3Pcs 315MHz XD-FST XD-RF-5V Wireless Transmitter Receiver Module Board Not Super-heterodyneRead More
6-30V 1 Channel Relay Module Switch Trigger Time Delay Circuit Timer Cycle Adjustable
$13.11Relay ModuleAdd to cartFeatures1. Trigger Signal Source:High Level Trigger (3.0 V-24 V), signal ground and system ground are not common, which can increase anti-interference abilitsystem (short circuit can also connect with a ground common)2. Output Capacity:can control no more than DC 30V 5A AC or 220 V devices 5A3. Optocoupler Isolation:improve the anti-interference ability, after the parameter setting, …
6-30V 1 Channel Relay Module Switch Trigger Time Delay Circuit Timer Cycle AdjustableRead More
3Pcs Wemos Motor Shield for WeMos D1 Mini I2C Dual Motor Driver TB6612FNGV1.0.0
$21.01Driver ModuleAdd to cartFeaturesI2C interfacePower supply voltage:VM=15V maxOutput current:Iout=1.2A(average) / 3.2A (peak)Standby control to save powerCW/CCW/short brake/stop motor control modesPins DescriptionVM:Motor power supply + (Max 15Vdc)GND:Motor power supply –A1 A2:Motor AB1 B2:Motor BS:Standby control port (in IO mode)More detail:Click Here!Package included3 x Motor Shield For WeMos D1 Mini
10Pcs TCRT5000 E2A3 1-Channel Smart Car infrared Tracking Sensor Detection PIR Sensor Module
$12.31Sensor & Detector ModuleAdd to cartProduct Usage1, the meter pulse data sampling2, fax machine shredder paper detection3, obstacle detection4, black and white line detectionProduct parametersInfrared reflection sensor:TCRT5000Detection reflection distance:1mm~25mmWorking voltage:5VOutput form:digital signal (0 and 1)Installation:with fixing bolt holesSmall board PCB size:3.5cm x 1cmSingle weight:4.5gFeaturesThe infrared emitting diode of the TCRT5000 sensor continuously emits infrared rays. When the emitted infrared rays …
5pcs DIY Technology invention Single-wing Wind Car Assembly Model DIY Car Kit
$28.96DIY Electronic KitsAdd to cartSpecificationsMaterial:WoodSize:approx. 12*7.6*12cmMulti-function:NoPower supply:2x AA Battery(not included)Foreign trade:YesDIY:Do it yourself according finished product painting in the package.ApplicationsInterest-building, parent-child communication, emotion, sensory,intellectual development, hands-on brain, hearing, interactive toys, grasping,hand-eye coordination, other abilitiesNote1.Please allow 1-3cm errors due to manual measurement.2.Due to the difference between different monitors, the pictures may not reflect the actual color of the item.Package Included5 …
5pcs DIY Technology invention Single-wing Wind Car Assembly Model DIY Car KitRead More
Reviews
There are no reviews yet.