5pcs 110-220V XH-W1818 High Precision Microcomputer Temperature Controller Circular Digital Display Embedded thermostat
$81.24
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product Name:High precision microcomputer temperature controller
Product model:XH-W1818
Temperature range:-50~110°C
Resolution:0.1 ° C
Temperature control range:-50~110°C
Temperature control accuracy:1 ° C
Temperature probe:NTC10K (B3950) L=1M
Supply voltage:AC220V
Applicable environment:-25~55°C Humidity 50%-85%
Output type:10A relay output
Appearance size:diameter 80mm
Opening size:diameter 61mm/3mm
How to use
1. Connect the power supply and load according to the instructions. Please do not overpressure and overload.
2. Setting mode, long press SET button for 5 seconds will display P0. Press SET button shortly to set H to heating mode and C to cooling mode (up and down button to switch)
3. Set the stop temperature, press the SET button once to flash the screen, and then press the up and down keys to set the desired stop temperature.
4. Press and hold the SET button for 5 seconds to display P0, press the up and down keys to switch to P1, then press the SET button to set the difference back (press the up and down keys to adjust). If the heating mode H needs to control the temperature between 36-38 degrees , then the stop temperature is set to 38 degrees and the back difference is set to 2 (the highest temperature minus the lowest temperature)
5. Indicator light. SET light is on to indicate that the parameter is being set; OUT indicator is flashing to indicate the start delay, and always on to indicate the output.
Setting function description
Press SET button for 5 seconds to enter internal parameter setting, up and down button to switch P0-P7
Code:Code description:Setting:Factory setting
P0:Operating mode:C/H:H
P1:Backlash setting:0.1-30:2
P2:Set upper limit:Max. 110 ° C:110°C
P3:Set lower limit:Min. -50 ° C:-50°C
P4:Temperature correction:-10~10°C:0°C
P5:Delayed start:0-10 minutes:0
P6:High temperature alarm:-50~110°C:110°C
P7:Data lock:OFF/ON:OFF
P0:Heating and cooling mode H/C
The low temperature start is the heating mode, set to H. For example:the actual temperature is 21 ° C, the temperature needs to be controlled between 36-38 ° C, we set P0 to H heating mode.
The high temperature start is the cooling mode, set to C. For example:the actual temperature is 38 °C, and the temperature needs to be controlled between 24-26 °C. We set P0 to C cooling mode.
P1:Hysteresis setting
In heating mode (H):The measured value starts the output heating to the set value when the set value – hysteresis.
For example, to control an indoor temperature between 36 and 38 ° C, the actual temperature is 20 ° C, heating equipment is required to heat room, P0 is set to H, the stop temperature is set to 38 degrees, and P1 is set to 2. (High temperature – low temperature = hysteresis, 38-36 = 2)
In cooling mode (C):When the measured value >= set value + hysteresis, the output cooling is started until the set value stops.
For example, to control an indoor temperature between 24 and 26 ° C, the actual temperature is 36 ° C, the cooling equipment is required to cool room, P0 is set to C, the stop temperature is set to 24 degrees, and P1 is set to 2. (High temperature – low temperature = hysteresis, 26-24 = 2)
P2:Limit the maximum set value (non-temperature control setting):up to 110 °C
For example, if P2 is set to 50 °C, then when you set the operation, the maximum temperature can only be set to 50 °C.
P3:Limit the min. set value (non-temperature control setting):min. -50 °C
For example, if P2 is set to 20 °C, then when you set the operation, the set min. temperature can only be 20 °C. Since P2 is set to 50 degrees and P3 is set to 20 degrees, then you set is only Can be adjusted between 20~50 degrees.
P4:Temperature correction
When the measured temperature deviates from the standard temperature, this function can be used to correct the corrected temperature = temperature before correction + correction value
For example, the probe measurement temperature is 22.8 ° C, the standard temperature is 24.2 ° C, you need to increase the height by 1.4 degrees, set P4 = 1.4
For example, the probe measurement temperature is 26.31 ° C, the standard temperature is 23.5 ° C, it needs to be lowered by 2.8 degrees, and P4 = -2.8 can be set.
P5:Delay start time:0~10 minutes
When controlling the cooling of the compressor equipment, the delay time can be set as required. When the controller outputs, the equipment will not start immediately, and it needs to be started after the set delay time has elapsed. (Non-compressor control is set to 0)
P6:High temperature alarm
When the measured value is greater than the alarm value, the screen temperature flashes and the drip sound alarm, the output is forcibly turned off in the heating mode, and the output is not turned off in the cooling mode.
P7:Data lock function
Turn on the data lock, P7 is turned ON to save the current setting parameters without being changed. At this time, the setting temperature and function are invalid. If you need to modify, you need to enter P7 to turn OFF to turn off the data lock function.
Package includes
5 x High precision microcomputer temperature controller
Weight | 0.45 kg |
---|
Customers Also Viewed
12pcs DC3-6V Dual Axis L-Type TT Motor DC Geared Motor for Car
$43.70Smart Robot & Solar PanelAdd to cartSpecificationsRatio of 1:120Working voltage:3V ~ 6VNo-load current voltage:6V ≤250mA , 3V ≤160mA No-load speed:250 ± 10% rpm @ 6V , 110 ± 10% rpm @ 3VWith dual axisPackage Included12 x TT motor
13Pcs 100R-1M Each 1 3362 Potentiometer Package 3362P Adjustable Resistor
$6.55Electronic Accessories & SuppliesAdd to cartDescription3362 potentiometer package Adjustable resistance package 100R-1M Each of 13 total.100R (101)200R (201)500R (501)1k (102)2k (202)5K (502)10K (103)20K (203)50K (503)100K (104)200K (204)500K (504)1M (105)Package included13 x 100R-1M 3362 Potentiometer
GT-24 Digital Wireless Module 2.4G NRF24L01 PA LNA industrial Grade 1100M Long Distance with Welding
$10.92Smart ModuleAdd to cartSpecificationModel:GT-24Module size:30.3 * 14.5mm (including PCB antenna)Operating frequency band:2.4GHz ~ 2.525GHz (adjustable, 1MHz step)Interface mode:1*8*1.27mm/2*4*2.54mm (The patch can also be used with the universal board and DuPont line)Supply voltage:DC 2.0-3.6V (Note:above 3.6V, the module will be permanently damaged)Communication level:0.7VCC ~3.3V (VCC refers to the module supply voltage)Measured distance:1000m (clear open space, maximum power, height 2m, …
Full SMD Welding Practice Board Kit SMD Lucky Turntable Flow Lamp DIY Soldering Skill Training Parts
$46.53DIY Electronic KitsAdd to cartFeaturePower supply voltage:5V DCBoard size:80*60mm Board thickness:1.6mmBoard material:Standard plate, all pads are tinned, fireproof and anti-powder materials, can be disassembled repeatedly.Net weight:24gNoteThis product is a spare part, and the buyer needs to weld and assemble it by himself. (instruction not includes)Package includes1 x DIY KIT
HBV-1822 8 Million Pixel Camera Module 8MP Auto Focus Lens USB Camera Board with UY2/MJPEG Output format
$71.06Other Module BoardAdd to cartSpecificationsModel No.:HBVCAM-1822Model Size:38mm ≠ 38mm ≠ 6.75mm÷0.2MMTemperature (Operation):-30C to 70CTemperature (Stable Image):0C to 50CAssembly technique:SMT (ROSH)Focus:AutoObject distance:30CM-infinitResolution:800LW/PH (Center)PCB printing ink:Blackinterface:USB 2.0Power supply:USB bus powersupply voltage:DC 5V÷5%Maximum Power consumption:1000 mWOperating system request:Win XP/win 7,8 / vista /android 4.0/ mac /Linuxwith uvc Sensor:IMX179 (1/3.2” )Seneor Package:CSP,Bare DieMaximum resolution:3264*2448Sensitivity:700mv /(lux-sec)Pixel Size:1.4┢m x 1.4┢m Maximum Image Transfer Rate:MJPEG 640×480 …
TPA3255 2.0 Digital Amplifier Board DC50V Strong High Power 300W + 300W Class D Digital Amplifier Board
$109.31Amplifier BoardAdd to cartProduct DescriptionModel:TPA3255Work:Class DQuiescent current:60mAWork efficienc:more than 90%DC 35-50V (can not exceed 50V)The current need more than 7.5AFrequency response:20Hz to 20KHzDynamic range:more than 100 dBSignal to noise ratio:(SNR) more than 111dBOutput Power315W / 4 ohm, distortion 10%185W / 8 ohm, distortion 10%260W / 4 ohm, distortion 1%150W / 8 ohm, distortion 1%Operating voltage:DC 50VColour:picture colorMaterial:ABSSize:149 x …
0.36 inch 4-digit LED Display Module TM1637 Driver Tube
$6.55LED BoardAdd to cartFeatureThe 4-digit LED Display Module integrates a 0.36′ 4-Digit 7-Segment Display Common Anode with 12 pins. It uses the driver chip TM1637.The module has 4 control pins of 2.54mm pitch, which can direct connect to microcontroller with jumper wires.So it’s very easy to control the matrix without tons of wiring. Available to make microcontroller control …
0.36 inch 4-digit LED Display Module TM1637 Driver TubeRead More
Reviews
There are no reviews yet.