5pcs 110-220V XH-W1818 High Precision Microcomputer Temperature Controller Circular Digital Display Embedded thermostat
$81.24
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product Name:High precision microcomputer temperature controller
Product model:XH-W1818
Temperature range:-50~110°C
Resolution:0.1 ° C
Temperature control range:-50~110°C
Temperature control accuracy:1 ° C
Temperature probe:NTC10K (B3950) L=1M
Supply voltage:AC220V
Applicable environment:-25~55°C Humidity 50%-85%
Output type:10A relay output
Appearance size:diameter 80mm
Opening size:diameter 61mm/3mm
How to use
1. Connect the power supply and load according to the instructions. Please do not overpressure and overload.
2. Setting mode, long press SET button for 5 seconds will display P0. Press SET button shortly to set H to heating mode and C to cooling mode (up and down button to switch)
3. Set the stop temperature, press the SET button once to flash the screen, and then press the up and down keys to set the desired stop temperature.
4. Press and hold the SET button for 5 seconds to display P0, press the up and down keys to switch to P1, then press the SET button to set the difference back (press the up and down keys to adjust). If the heating mode H needs to control the temperature between 36-38 degrees , then the stop temperature is set to 38 degrees and the back difference is set to 2 (the highest temperature minus the lowest temperature)
5. Indicator light. SET light is on to indicate that the parameter is being set; OUT indicator is flashing to indicate the start delay, and always on to indicate the output.
Setting function description
Press SET button for 5 seconds to enter internal parameter setting, up and down button to switch P0-P7
Code:Code description:Setting:Factory setting
P0:Operating mode:C/H:H
P1:Backlash setting:0.1-30:2
P2:Set upper limit:Max. 110 ° C:110°C
P3:Set lower limit:Min. -50 ° C:-50°C
P4:Temperature correction:-10~10°C:0°C
P5:Delayed start:0-10 minutes:0
P6:High temperature alarm:-50~110°C:110°C
P7:Data lock:OFF/ON:OFF
P0:Heating and cooling mode H/C
The low temperature start is the heating mode, set to H. For example:the actual temperature is 21 ° C, the temperature needs to be controlled between 36-38 ° C, we set P0 to H heating mode.
The high temperature start is the cooling mode, set to C. For example:the actual temperature is 38 °C, and the temperature needs to be controlled between 24-26 °C. We set P0 to C cooling mode.
P1:Hysteresis setting
In heating mode (H):The measured value starts the output heating to the set value when the set value – hysteresis.
For example, to control an indoor temperature between 36 and 38 ° C, the actual temperature is 20 ° C, heating equipment is required to heat room, P0 is set to H, the stop temperature is set to 38 degrees, and P1 is set to 2. (High temperature – low temperature = hysteresis, 38-36 = 2)
In cooling mode (C):When the measured value >= set value + hysteresis, the output cooling is started until the set value stops.
For example, to control an indoor temperature between 24 and 26 ° C, the actual temperature is 36 ° C, the cooling equipment is required to cool room, P0 is set to C, the stop temperature is set to 24 degrees, and P1 is set to 2. (High temperature – low temperature = hysteresis, 26-24 = 2)
P2:Limit the maximum set value (non-temperature control setting):up to 110 °C
For example, if P2 is set to 50 °C, then when you set the operation, the maximum temperature can only be set to 50 °C.
P3:Limit the min. set value (non-temperature control setting):min. -50 °C
For example, if P2 is set to 20 °C, then when you set the operation, the set min. temperature can only be 20 °C. Since P2 is set to 50 degrees and P3 is set to 20 degrees, then you set is only Can be adjusted between 20~50 degrees.
P4:Temperature correction
When the measured temperature deviates from the standard temperature, this function can be used to correct the corrected temperature = temperature before correction + correction value
For example, the probe measurement temperature is 22.8 ° C, the standard temperature is 24.2 ° C, you need to increase the height by 1.4 degrees, set P4 = 1.4
For example, the probe measurement temperature is 26.31 ° C, the standard temperature is 23.5 ° C, it needs to be lowered by 2.8 degrees, and P4 = -2.8 can be set.
P5:Delay start time:0~10 minutes
When controlling the cooling of the compressor equipment, the delay time can be set as required. When the controller outputs, the equipment will not start immediately, and it needs to be started after the set delay time has elapsed. (Non-compressor control is set to 0)
P6:High temperature alarm
When the measured value is greater than the alarm value, the screen temperature flashes and the drip sound alarm, the output is forcibly turned off in the heating mode, and the output is not turned off in the cooling mode.
P7:Data lock function
Turn on the data lock, P7 is turned ON to save the current setting parameters without being changed. At this time, the setting temperature and function are invalid. If you need to modify, you need to enter P7 to turn OFF to turn off the data lock function.
Package includes
5 x High precision microcomputer temperature controller
Weight | 0.45 kg |
---|
Customers Also Viewed
10pcs NRF24L01 Wireless Module 24L01 2.4G Wireless Communication Module
$20.36Smart ModuleAdd to cart>>>Manual:Click here to openOverviewThis wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost!! This module can achieve a good balance between wireless transition performance and cost!You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system!Features– 2Mbit/s, 1Mbit/s, 250Kbit/s, three selectable transmission rate.– MultiCeiver …
10pcs NRF24L01 Wireless Module 24L01 2.4G Wireless Communication ModuleRead More
M5Stack ATOM H-Bridge Driver Kit DRV8876 N-channel H-Bridge Motor Driver ATOM Lite Kit DC Motor Control
$49.33Driver ModuleAdd to cartDescriptionATOM HDriver is a H-bridge motor driver accessory for M5Atom. It integrates the DRV8876 motor driver chip,which supports 9-24V/DC voltage input(The inline DC/DC circuit supplies power to the whole device,the ADC pin G33 is directly connected to the voltage divider circuit and can monitor the power input at any time) The current output is 1.5A, …
Portable Electric Pencil Sharpener Automatic Touch Switch School office Classroom
$24.29Laboratory Thermostatic DevicesAdd to cartFeatures– BLADE HOLDER:Provide a replacement blade holder additionally, rotate top safety cover to replace it, guarantee the durability of the pencil sharpener.– EFFICIENT:suitable for 2 AA batteries(not including), press down pencil to start work and sharpen automatically, work well for colored pencils, lead pencils and only need 3-5 seconds to close finish work. Completing a …
Portable Electric Pencil Sharpener Automatic Touch Switch School office ClassroomRead More
3pcs Red Light 2in1 22mm AC50-500V 0-100A Amp Voltmeter Ammeter Voltage Current Meter with CT Au23
$24.34Electronic Accessories & SuppliesAdd to cartDescription22MM AC50-500V 0-100A Digital LED Voltmeter Voltage Meter Indicator Light Ammeter Ampermeter Current Tester 2 In 1 With CTSpecificationsMaterial:Electrical componentsColor:Red22mm Digital DisplayVoltage Measuring Range:AC 50~500VCurrent Measuring Range:0~100ARated Frequency:50/60HzSize:29x51mmInstallation Diameter:20.3/0.8mmQuantity:1 SetPackage included3 x AC Voltmeter Ammeter 2 in 1 Indicator3 x Current Coil Transformer
5pcs 12 in 1 Transparent USB Tester DC Digital Voltmeter Amperemeter Voltagecurrent Meter Ammeter Detector Power Bank Charger indicator
$48.11Test & Measuring ModuleAdd to cartTechnical parametersVoltage measuring range:3.60V ~ 32.5 V Resolution precision:0.01 V Current measuring range:0.00A ~ 5.00 A Resolution precision:0.01 APower cumulative range:0 ~ 999999 WH Resolution precision:0.001 WhCapacity range:0 ~ 999999 mAH Resolution precision:0.001 AhTemperature:0 → ~ + 80 → Resolution precision:1 →D+ Voltage:0.000V ~ 2.999 V Resolution precision:0.001 VD- Voltage:0.000V ~ 2.999 V Resolution precision:0.001 …
3pcs 4S Single 3.7V 18650 Lithium Battery Capacity indicator Module Percent Power Level Tester LED Display Board
$6.75Test & Measuring ModuleAdd to cartFeatures1. Intelligent power display panel, tap the trigger switch to display, display automatically closed after 3 seconds (Note:if you need to keep the light , direct short-circuit switch)2. Static power consumption 2~3 mA, It’s negligible3. Power indication(The color of the lamp is green)U≈6.6V 25% led indicator is litU≈7V 50% led indicator is litU≈7.5V 75% led …
Reviews
There are no reviews yet.