XH-W1501 Hot and Cold Automatic Switching 2 Way Relay Output Temperature Adjustable thermostat Constant Temperature Alarm
$22.71
Voltage 12V / Voltage 24V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product Name:High precision digital thermostat
Product model:XH-W1501
Temperature range:-50~110°C
Temperature measurement accuracy:+-0.1 °C
Temperature control range:-40~100°C
Control accuracy:0.1 ° C
Refresh rate:0.5S
Temperature probe:NTC10K/B3950 waterproof probe (L=50CM)
Supply voltage:DC12V/24V
LED display color:red
Applicable environment:-10~60°C Humidity 20%~85% (non-condensing)
Output type:2 relay outputs, capacity 220V5A/12V10A
Product size:panel 100 x 66mm, main board 78 x 51 x 17mm
Opening size:78 x 51mm (M3 screw, hole diameter 3.5mm)
Net weight:80g
Package includes
1 x High precision digital thermostat
Code:Code description:Set range:Factory settings
P0:Backlash setting:0.1-15:2
P1:Temperature correction:-7~7°C:0
P2:Heating delay start time:0-300 seconds:0
P3:Cooling delay start time:0-300 seconds:0
P4:High temperature alarm:ON/OFF/-50~110:OFF/110°C
P5:Low temperature alarm:ON/OFF/-50~110:OFF/50°C
Pressing the +- button while powering down can restore the factory settings.
P0 Hysteresis setting
Press and hold the SET button to enter the internal setting, select P0, and press the SET button again to set the hysteresis value. (The hysteresis is the difference between the thermostat and the re-operation after reaching the set value, for example, the heating mode, heating to 408C and stopping at 35 °C to start heating again, the difference is 5)
P1 Temperature correction
Press and hold the SET button to enter the internal setting, select P1, and press the SET button again to set the correction value. (For example, the detection temperature is 26 ° C, and the actual temperature is 25 ° C, the calibration temperature to be set is _1 ° C, real-time temperature = temperature value before correction + correction value)
P2 Heating delay start time
This function is used for compressor delay start. If you are not controlling the compressor, you can ignore this setting. (If you are new to this thermostat, if you are not familiar with the settings, don’t set this item first)
P3 Cooling delay start time
This function is used for compressor delay start. If you are not controlling the compressor, you can ignore this setting. (Do not set this item if you are not familiar with the settings when you first touch this thermostat)
P4 High temperature alarm
Press and hold the Set button to enter the internal settings. Select P4, press the setting button, select the ON state, and press the setting button to set the required high temperature alarm value (set the high temperature alarm value. When the detected temperature exceeds this value, the screen displays the upper part of 888, the buzzer sends out inchAlarminch alarm! When the temperature is lower than the high temperature alarm value, the buzzer stops alarming)
P5 Low temperature alarm
Press and hold the Set button to enter the internal settings. Select P5, press the setting button, select the ON state, and then press the _ down setting button to set the required low temperature alarm value (set the low temperature alarm value. When the detected temperature is lower than this value, the screen displays the upper part of 888, buzzer The device emits a inchdididi’ alarm sound! When the temperature is higher than the low temperature alarm value, the buzzer stops alarming)
Weight | 0.05 kg |
---|
Customers Also Viewed
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water Heater
$21.87Laboratory Heating EquipmentsAdd to cartDC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterSpecificationsModel:SSG-2Type:Normally ClosedMaterials:Plastic & CopperDimension:83*90*49cmPipe Inside Diameter:1/2 inchNet Weight:(approx.) 190gFeaturesThis is a DC12V solenoid valve usually used for solar water heater.It can work with water from 1 to 100℃ (or some other liquid).Working Voltage Range:Rated Voltage ±10%Working Water Pressure:0.02 to 0.8MpaThe working water pressure would be too low/high to …
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterRead More
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set Kit
$76.17Terminal BlocksAdd to cartDescription650 Pcs Assorted Ring Insulated Electrical Wire Terminals Crimp Connector Set KitSpecificationQuantity:650PcsMaterial:Copper + PVC+ TinplateInsulated crimp terminals.All are enclosed in plastic case for easy access.The assorted crimp terminals is including50 x Ring M3 Red50 x Ring M4 Red50 x Ring M5 Red50 x Ring M6 Red50 x Ring M8 Red50 x Ring M4 Blue50 x …
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set KitRead More
3.5 inch Protective Enclosure Case Support Dispaly Screen or Cooling Fan for Raspberry Pi
$9.26Raspberry Pi & Orange PiAdd to cartFeatures– Fully updated for Raspberry Pi 3B+/3B/2B– Can support 3.5 inch screen or cooling fan (notes:can not assemble them at the same time)– Heat sink openings for both CPU and LAN chip– High-gloss finish, surface mountableSpecificationsColor:BlackMaterial:ABSSuitable for Raspberry Pi 3B+/3B/2BWeight:45gSize:9cm*6.2cm*3.4cmPackage Included1x ABS Case4x Non-slip mat4x Screws
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module for
$47.25DIY Electronic KitsAdd to cartDescription1. Use TM1650 (compatible with AIP650) digital tube driver chip, support 8-level brightness adjustment, working voltage 3.3V ~ 5.5V2. IIC interface, only need 2 ordinary IO can drive, do not need to repeat scanning of MCU, saving MCU resources.3. 4 digit 0.56 inch red common negative digital tube with decimal point.4. 0.56 inch with four …
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module forRead More
WEAH-81 Car Heavy Bass Frequency Divider High and Low 2-way 2 Bass Crossover Upgrade Tool
$33.09Amplifier BoardAdd to cartFeatureBrand:WEAHModel:81Power:100WApplicable impedance:4-8ohmFrequency response:100Hz ~ 45HzDimensions:133 x 95 x 44mmApplication environment:Car or home speaker DIYPackage includes1 x Bass Frequency DividerHow to Wire:
5pcs 8-36W intelligent Sensor LED Ceiling Light And Sound Control Power Supply Module Bulb Panel Light Built-in Power Driver
$21.42Power Supply ModuleAdd to cartDescriptionInput Voltage:AC185-265VOutput Current:0.22AOutput Voltage:24-108VEfficiency:90%Working Frequency:50/60HZOutput Power:8-24WSound Control:50-75dBLight control:7-20LuxDiameter:25.8mmFeature1. The combination of sound and light control, when the light is strong, does not work, the light intensity is lower than 12-15LUX, and the sound of the induction 27-36DB starts automatically.2. Delay 40-60S automatically extinguished, easy to install, compatible with ordinary switches, no additional wiring.3. Single trigger, …
Reviews
There are no reviews yet.