5pcs 220V XH-W2060 Embedded Digital thermostat Cabinet Freezer Cold Storage thermostat Temperature Controller Temperature Control
$86.31
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product Name:Digital display embedded cabinet thermostat
Product model:XH-W2060
Temperature range:-19~99 °C
Control range:-19~99 °C
Temperature control accuracy:1 °C
Measurement input:NTC10K waterproof probe L = 1 m
Refresh rate:4 times / sec
Use environment:-30~60°C Humidity 20%-85%
Use environment:12/24/220V optional
Output type:Relay output up to 10A
Appearance size:77 x 62 x 34.5mm
Opening size:71 x 29mm
Other functions:Power-off memory, state memory, temperature correction, delay start
Code:Code Description:Setting Range:Factory settings:Unit
P0:Operating mode:C/H:C:/
P1:Hysteresis setting:0.1-50:2:°C
P2:Temperature correction:-9~9:0:°C
P3:Delayed start:0-9:0:Minute
P4:High temperature alarm:-19~99:99:°C
P0:Temperature control mode
C:Cooling mode H:Heating mode
P1:Difference setting
For example:P1=5
Cooling mode:When the detected temperature reaches the stop temperature, the relay is disconnected, the cooling is stopped, the temperature rises by 5 °C, and the relay closes again.
Heating mode:When the detected temperature reaches the stop temperature, the relay is disconnected, the heating is stopped, the temperature drops back to 5 °C, and the relay closes again.
P2:Temperature correction
If the detected temperature and the actual temperature deviate, you can use this function to correct. Actual value = measured value + corrected value. For example, if the measured temperature is 25 ° C and the actual temperature is 26 ° C, then P2 can be set to 1, then The final temperature is 25+1=26
P3:Delayed start
This function is used for compressor cooling. If it is used in a refrigerator freezer, this value must be set. According to the compressor back pressure, the value is usually set to 3-6 minutes.
P4:High temperature alarm
Set the high temperature alarm value. When the detected temperature exceeds this value, the screen flashes and the buzzer sounds an alarm.
Package includes
5 x Digital display embedded cabinet thermostat
Weight | 0.875 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.