XH-M451 Humidity Control Module Imported Humidity Probe Humidity Control Board Humidity Control Switch Controller
$30.36
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product model:XH-M451
Measuring range:00%-99%RH
Measurement accuracy:÷5% (40%-80%)
Product size:59*40*17mm
Power selection:12V (DC)
Instructions for use
1. Turn on the power (12V/DC) humidity controller and press and hold the button for 2s to enter the humidity adjustment setting (0%-99%) ‘4’ humidity rises, ‘one’ humidity drops
2. When the ambient humidity is higher than the set humidity, the relay is closed and the bulb lights up. When the ambient humidity is lower than the set humidity, the relay is disconnected and the light is off.
Parameter setting example
Example 1 I want to set the humidity higher than 70% to dehumidify, and the dehumidification stops at 60%, then the parameters should be set to; +70%, -60%
Example 2 I want to set the humidity below 40% for humidification, and the humidification will stop at 80%, then the parameters should be set as:+40%, -80%
The factory value of the humidity sensor module is 40%-60%RH (pleasant indoor humidity). If you want to restore the factory setting, please press +-, press for 1s.
Package includes
1 x XH-M451 Humidity Control Module
Weight | 0.038 kg |
---|
Customers Also Viewed
USR-ES1 W5500 Chip SPI to LAN Ethernet Converter TCP/IP Module WIZ820io
$15.30Converter BoardAdd to cart>>>Manual:Click here to openOverviewUSR-ES1 embeds Wiznet’s W5500 chip, which uses hardware logic gates to implement the transport layer and network layer of the TCP/IP protocol stack (such as TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE, etc.), and integrates The data link layer, physical layer, and 32K bytes of on-chip RAM serve as data transceiving buffers. …
USR-ES1 W5500 Chip SPI to LAN Ethernet Converter TCP/IP Module WIZ820ioRead More
3pcs TEC1-12715 12V Heat Sink thermoelectric Cooler Peltier Plate Module
$32.04Electronic Accessories & SuppliesAdd to cart40 x 40mm TEC1-12715 12V Heatsink Thermoelectric Cooler Peltier Plate ModuleDescriptionSolid state, vibration free, noise-freeSimple to install and operateThe hot surface need to be good heat sinkSpecificationProduct name:thermoelectric cooler plate moduleModel:TEC1-12715Color:whiteCouples:127Voltage:12VUmax:15.4VImax:15AMax power consumption:231WTmax:70°CQcmax T=0(W):137WSize:40 x 40 x 3.3mmWeight:50gPackage included3 x TEC1-12715 cooler plate module
EQKIT KM-1 DC 6-12V PWM Motor Speed Controller Kit DIY Motor Speed Regulator Set Stepless Speed Control
$8.73Module KitsAdd to cartSpecificationsModel:KM-1Operating voltage:DC 6-12VPCB board size:40 x 40mmCircuit descriptionKM-1 uses PWM (pulse width modulation) to control the speed of the motor, adjust the pulse width duty ratio, so that the speed from zero to the maximum speed stepless speed regulation. The wider the crest width of the control waveform, the faster the motor speed; on the …
20pcs 63V 10000UF 105 High Frequency Temp Electrolytic Capacitor 30mm x 50mm Long Life
$108.62Electronic Accessories & SuppliesAdd to cartSpecificationModel:485622Voltage:63VCapacitance:10000UFTemperature:105→Diameter:30mm / 1.1 inchHeight:50 mm / 2 inchFeaturesLong life, high temperatureHigh-frequency capacitorsPackage included20 x Electrolytic Capacitor
Reviews
There are no reviews yet.