Cart

Your Cart is Empty

Back To Shop
Call To +18 Email : Info

CJMCU-06 SPL06-001 Drone Pressure Height Sensor Module Position 5cm

SKU: GP-1295458

$8.09

Dispatch:Usually will be shipped in 24 hours
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard

Feature
Pressure:300 – 1200 hPa.
Temperature:-40°C to 85 °C.
Pressure sensor precision:± 0.006 hPa (or ±5 cm) (high precision mode).
Pressure sensor accuracy:± 0.06 hPa (or ±50 cm) (non -linearity), ±1 hPa (or ±8 m) (absolute).
Temperature accuracy:± 0.5°C.
Pressure temperature sensitivity
Measurement time:Typical:28 ms. Minimum:3 ms.
Average current consumption:High precision:60 µA, Low power:3 µA, Standby
Supply voltage:VDDIO:1.2 – 3.6 V, VDD:1.7 – 3.6 V.
Operating modes:C ommand (manual), Background (automatic), and Standby.
Calibration:Individually calibrated with coefficients for measurement correction.
FIFO:Stores latest 32 pressure or temperature measurements.
Interface:I2C and SPI (both with optional interrupt)
Package dimensions:8-pin LGA, 2.0 mm x 2.5 mm x 0.95mm.
Product Description
The SPL06-001 is a miniaturized Digital Barometric Air Pressure Sensor with a high accuracy and a low current consumption.
The SPL06-001 is both a pressure- and a temperature sensor.
The pressure sensor element is based on a capacitive sensing principle which guarantees a high precision during temperature changes.
The small package makes the SPL06-001 ideal for mobile applications and wearable devices.
The SPL06-001 ‘s internal signal processor converts the output from the pressure and temperature sensor elements to 24-bit results.
Each pressure sensor has been calibrated individually and contains calibration coefficients.
The coefficients are used in the application to convert the measurement results to true pressure and temperature values.
The SPL06-001 has a FIFO that can store the latest 32 measurements.
By using the FIFO, the host processor can remain in a sleep mode for a longer period of time between readouts.
This can reduce the overall system power consumption.
Sensor measurements and calibration coefficients are available through the serial I2C or SPI interface.
Typical Applications
Indoor Navigation (floor detection e.g. in shopping malls and parking garages)
Health and Sports (accurate elevation gain and vertical speed)
Outdoor Navigation (GPS start-up time and accuracy improvement, dead-reckoning e.g. in tunnels)
Weather Station (‘Micro-weather’ and local forecasts)
Package includes
1 x Pressure Height Sensor

Weight0.002 kg

Reviews

There are no reviews yet.

Be the first to review “CJMCU-06 SPL06-001 Drone Pressure Height Sensor Module Position 5cm”

Your email address will not be published. Required fields are marked *

SKU: GP-1295458 Category:

Customers Also Viewed

Cart

Your Cart is Empty

Back To Shop