CJMCU-06 SPL06-001 Drone Pressure Height Sensor Module Position 5cm
$10.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Pressure:300 – 1200 hPa.
Temperature:-40°C to 85 °C.
Pressure sensor precision:± 0.006 hPa (or ±5 cm) (high precision mode).
Pressure sensor accuracy:± 0.06 hPa (or ±50 cm) (non -linearity), ±1 hPa (or ±8 m) (absolute).
Temperature accuracy:± 0.5°C.
Pressure temperature sensitivity
Measurement time:Typical:28 ms. Minimum:3 ms.
Average current consumption:High precision:60 µA, Low power:3 µA, Standby
Supply voltage:VDDIO:1.2 – 3.6 V, VDD:1.7 – 3.6 V.
Operating modes:C ommand (manual), Background (automatic), and Standby.
Calibration:Individually calibrated with coefficients for measurement correction.
FIFO:Stores latest 32 pressure or temperature measurements.
Interface:I2C and SPI (both with optional interrupt)
Package dimensions:8-pin LGA, 2.0 mm x 2.5 mm x 0.95mm.
Product Description
The SPL06-001 is a miniaturized Digital Barometric Air Pressure Sensor with a high accuracy and a low current consumption.
The SPL06-001 is both a pressure- and a temperature sensor.
The pressure sensor element is based on a capacitive sensing principle which guarantees a high precision during temperature changes.
The small package makes the SPL06-001 ideal for mobile applications and wearable devices.
The SPL06-001 ‘s internal signal processor converts the output from the pressure and temperature sensor elements to 24-bit results.
Each pressure sensor has been calibrated individually and contains calibration coefficients.
The coefficients are used in the application to convert the measurement results to true pressure and temperature values.
The SPL06-001 has a FIFO that can store the latest 32 measurements.
By using the FIFO, the host processor can remain in a sleep mode for a longer period of time between readouts.
This can reduce the overall system power consumption.
Sensor measurements and calibration coefficients are available through the serial I2C or SPI interface.
Typical Applications
Indoor Navigation (floor detection e.g. in shopping malls and parking garages)
Health and Sports (accurate elevation gain and vertical speed)
Outdoor Navigation (GPS start-up time and accuracy improvement, dead-reckoning e.g. in tunnels)
Weather Station (‘Micro-weather’ and local forecasts)
Package includes
1 x Pressure Height Sensor
Weight | 0.002 kg |
---|
Customers Also Viewed
3pcs 2x50W TPA3116 AUX+Bluetooth 5.0 HIFI High Power Digital Amplifier Stereo Board AMP Amplificador Home theater without Shell
$54.90Amplifier BoardAdd to cartSpecificationsAudio input:AUX+bluetoothWork voltage:9-24 DCPower:2*50WCooling fin:LargeSpeaker:4-8Ω;30-200WProtection:Overvoltage,undervoltageSize:84*52*24mmFeatures1. This product is full of materials, featuring high performance and high performance price, especially for HIFI music power amplifier with high power and high fidelity.2. TPA3116D2 is a type D amplifier IC launched by TI company, which has very high index parameters.The maximum modulation frequency is 1.2MHZ, and the high …
5PCS USB To TTL Debug Serial Port Cable for Raspberry Pi 3B 2B / COM Port
$20.44Raspberry Pi & Orange PiAdd to cartMore info and driver, please !!!Supports WIN XP/WIN7/ WIN8/ WIN10Reference to WIN10, you can !!!NoteNo driver on raspberry pi 3 model bRaspberry Pi main board is not included!Package included5x USB To TTL Debug Serial Port Cable For Raspberry Pi / COM Port
DIY LED Light Kit ONLY for LEGO 60197 Passenger Train Building Block Bricks Lighting
$32.79DIY Electronic KitsAdd to cartSpecificationInterface:USBColor:As the picture shownThe product is just a light kit, not included the model!!!FitmentONLY For LEGO 60197 Passenger Train Building Block Bricks ToyFeaturesEasy to install.LED powered by USB.Make your model more cool.Package Included1 x LED Light Kit(Model Not Included)
5Pcs M5Stack I/O Hub 1 to 6 Expansion Board Grove I/O interface for Blockly Development IoT MEGA328 Module for Arduino
$75.21Converter BoardAdd to cartDescriptionPbHUB, is a expander for singel-bus GROVE PORTB(Black port on M5GO Base). 1-to-6. PortB can be used as GPIO and analog in two data lines connected to GPIO36 and GPIO26 on ESP32. Same as PaHUB, it provides a solution for mutiple device control by PORTB. With PbHUB each of the IO can be configurated to …
10Pcs Green LED Power Symbol Momentary Latching Switch LED Light Push Button SPST
$20.86Electronic Accessories & SuppliesAdd to cart10Pcs Green LED Power Symbol Momentary Latching Switch LED Light Push Button SPSTDecriptionLatching type:Push it– on, push it again — offLED color:GreenSize(H*D):1.4 x 1cm / 0.55inch x 0.39inch (approx)Quantity:10 pcsFunction:MomentaryLED light voltage:3.2VSwitch voltage:12VMaximum operating current:20mAWith led light, with power symbol, light touch switchEasy to use and installNote1. Please check the picture and part number carefully …
10Pcs Green LED Power Symbol Momentary Latching Switch LED Light Push Button SPSTRead More
100Pcs Red Heat Shrink Solder Sleeve Seal Wire Splice Butt Connector AWG 22-18GA
$72.89ConnectorsAdd to cartName:(100) Heat Shrink Solder Sleeve Seal Wire Splice Butt Connector AWG 22-18GA RedMaterial:Tinned CopperColor:RedShrinking Ratio:2:1Working temperature:-55℃~125℃Shrink temperature:80℃Solder melting temperature:138℃Complete solder melting temperature:160℃Cable cross-section:0.5mm-1.0 mmDiameter:3mm/0.12inch(appr.)FeaturesPlacement on Vehicle:Left, Right, Front, Rear.Solder and seal and with advanced waterproof function.Polyolefin tubing in outside and hot melt adhesive in inside.Can be ideal used in marine and automobile applications.Improve pullout strength, …
100Pcs Red Heat Shrink Solder Sleeve Seal Wire Splice Butt Connector AWG 22-18GARead More
Reviews
There are no reviews yet.