5pcs DC-DC 45-390V Adjustable High Voltage Booster Regulator Capacitor Charging Electromagnetic Power Module
$54.80
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Module Name:High Voltage Boost Module (High Voltage Warning:Please pay attention during use.)
Module nature:Non-isolated boost module
Input voltage:Two input voltage ranges are available, (selected by jumper on the back of the PCB, the default is 10-32V input)
1. 8-16V input (for three-string lithium battery and 12V battery application)
2. 10-32V input (for wide input voltage range applications)
Input current:5A (MAX)
Static working current:15mA (12V liter 50V, the higher the output voltage, the static current will increase)
Output voltage:45-390V continuously adjustable (default 50V. This module has a voltage regulation function, the output voltage is not stable after adjustment, does not change with the input voltage changes)
Output current:0.2A MAX (related to input and output voltage difference, the higher the output voltage, the smaller the output current)
Output power:40W (peak 70W)
Working temperature:-40~+85 degrees (enhance heat dissipation when the ambient temperature is too high)
Working frequency:75KHz
Conversion efficiency:up to 88% (efficiency related to input, output voltage, current, voltage difference)
Short circuit protection:Yes. (Input 10A fuse, please do not directly short-circuit the arc at the output end! Direct short-circuit pull arc may damage the rectifier device, if you want to short-circuit the arc, please limit the power resistor in series)
Overcurrent protection:Yes. (Input current exceeds 4.5A, reducing output voltage)
Overvoltage protection:Yes. (The output voltage exceeds 410V, reducing the output voltage)
Input reverse connection protection:Yes (non-self-recovery type, connect the reverse-burn fuse, try not to reverse the connection.)
Installation method:4 3mm screws
Wiring method:Terminal block welding output
Module size:60mmx50mmx22mm (length x width x height)
Charge the capacitor to measure the measured data
470uF full to 390V time 2 seconds
1000uF full to 390V time 4 seconds
2200uF full to 390V time 8 seconds
4700uF full to 390V time 18 seconds
Package includes
5 x High Voltage Boost Module
Weight | 0.275 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.