Waveshare 5 inch HDMI LCD (G) 800×480 Supports Various Systems Resistive Touch HD Display Screen Board VGA Audio Output
Shipping:Standard Shipping about 10-25 business days
WIKI:Click here to open
Datasheet:Click here to open
800×480 hardware resolution, configurable by software.
Used with Raspberry Pi, supports Raspbian, Ubuntu, WIN 10 IoT, single touch, and driver free.
Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc.
It has a 3.5mm audio jack and supports HDMI audio output
Supports VGA input (specific cable is required and should be purchase separately)
Limited by the game console OS, the touch function is unavailable.
Sound support means, it is possible for the game console to output sound signal via LCD embedded speaker, external speaker interface, or earphone jack.
Q1:Why the LCD doesn’t work with my Raspbian
A:To use the LCD with the Raspberry Pi official image, driver (SPI touch interface only) should be installed first. Please refer to the user manual.
However, for the first testing, you may want to use our image directly (if provided).
Q2:Why the LCD still doesn’t work with the Waveshare provided image
A:Make sure the hardware connection is correct and connects fine.
Make sure the image in TF card is burnt correctly.
The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, if both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact.
Q3:Which power supply should I use
It is recommended to use a 5V/3A power adapter for the Raspberry Pi other than USB connection, otherwise the Pi may failed to start up because the PC’s USB port might have not enough power.
For large size LCDs, say, 10inch diagonal or more, another stand-alone power adapter is also required to provide power to the LCD.
For more info, please check the wiki page.
1 x 5inch HDMI LCD (G)
1 x HDM1 cable
1 x HDMl female to micro HDMI male adapter
1 x USB cable type-A male port to micro male port
1 x Resistive touch pen
1 x RPi copper pillar package (4PCS set)
Customers Also Viewed
3pcs Mini IR Pyroelectric infrared PIR Motion Human Body Sensor Detector Module$11.83Sensor & Detector ModuleAdd to cart
FeaturesWeight:7g (approx)Dimension:3.2cm x 2.4cm x 2.8cm (approx)Infrared sensor with control circuit boardThe sensitivity and holding time can be adjustedWorking voltage range:DC 4.5V- 20VCurrent drainVoltage output:High/Low level signal:3.3V TTL outputDetection distance:3–7M(can be adjusted)Detection rangeDelay time:5-200S(can be adjusted, default 5s +-3%)Blockade time:2.5 S (default)Trigger:L:Non-repeatable trigger H:Repeat Trigger (default)Work temperature:-20-+80°CTrigger method:L unrepeatable trigger / H repeatable triggerNoteSensitive Setting:turn …
1Pcs AC110V Coil Power Relay LY2NJ JQX-13F DPDT 8 Pin PTF08A with Socket Base$8.73Electronic Accessories & SuppliesAdd to cart
SpecificationsModel:LY2NJ (8 pins)Coil voltage:AC110VCoil Power:DC (W):≤0.9AC (VA):≤1.2Contact Structure:8 pins 2 normally open 2 normally closedContact capacity:10A 250VACPull-in voltage:≤80% (V)Release voltage:DC:≥10% (V), AC:≥30%Contact resistance:≤50 (mΩ)Insulation resistance:≤100 (mΩ)Dimensions:27.5 * 21 * 35.3mmTerminals form:SocketAction time:20ms or lessReset Time:20ms or lessOperating frequencyMechanical 18,000 cycles / hourElectrical 18,000 times / hourPackage included1 x AC110V Coil Power Relay with socket base
3pcs DT-06 Wireless WiFi Serial Transmissions Module TTL to WiFi Compatible HC-06 bluetooth External Antenna Version Optional with Antenna$29.77Smart ModuleAdd to cart
Description1. TTL-WiFi module is developed based on ESP-M1 WiFi module, which leads to serial port TTL, EN, STATE and other pins. 2. The latest version of Serial Port Transfer Firmware built in the product can complete the real-time data transmission from TTL port to WiFi/cloud, with low power control, status indication and other functions. 3. …