Waveshare 5 inch HDMI LCD (G) 800×480 Supports Various Systems Resistive Touch HD Display Screen Board VGA Audio Output
$98.40
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Documents
WIKI:Click here to open
Datasheet:Click here to open
Features
800×480 hardware resolution, configurable by software.
Used with Raspberry Pi, supports Raspbian, Ubuntu, WIN 10 IoT, single touch, and driver free.
Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc.
It has a 3.5mm audio jack and supports HDMI audio output
Supports VGA input (specific cable is required and should be purchase separately)
Note
Limited by the game console OS, the touch function is unavailable.
Sound support means, it is possible for the game console to output sound signal via LCD embedded speaker, external speaker interface, or earphone jack.
FAQ
Q1:Why the LCD doesn’t work with my Raspbian
A:To use the LCD with the Raspberry Pi official image, driver (SPI touch interface only) should be installed first. Please refer to the user manual.
However, for the first testing, you may want to use our image directly (if provided).
Q2:Why the LCD still doesn’t work with the Waveshare provided image
A:Make sure the hardware connection is correct and connects fine.
Make sure the image in TF card is burnt correctly.
The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, if both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact.
Q3:Which power supply should I use
It is recommended to use a 5V/3A power adapter for the Raspberry Pi other than USB connection, otherwise the Pi may failed to start up because the PC’s USB port might have not enough power.
For large size LCDs, say, 10inch diagonal or more, another stand-alone power adapter is also required to provide power to the LCD.
For more info, please check the wiki page.
Package includes
1 x 5inch HDMI LCD (G)
1 x HDM1 cable
1 x HDMl female to micro HDMI male adapter
1 x USB cable type-A male port to micro male port
1 x Resistive touch pen
1 x RPi copper pillar package (4PCS set)
Weight | 0.391 kg |
---|
Customers Also Viewed
29Pcs/Set 24/29 Laboratory Glassware Kit 25/50/100/250/500mL Flask Lab Chemistry Glass Ground Joint Distillation Separation
$261.21Lab ChemicalsAdd to cartDescription1. Be made of G3.3 borosilicate glass.This borosilicate glass with low linear coefficient of expansion is ideal choice for fabricating laboratory glassware.Annealing Point:560℃Linear Coefficient of Expansion:32*10-7/℃Softening Point:820℃2. The thickness of the flask wall is 2.5mm.3. All of the joint is 24/29,This kit has 18 kinds of parts as belowNo.:Specification:Part name:Quantity1:24/29:Claisen adapter:12:24/29:75°Distillation adapter:13:24/29:Vacuum take-off adapter:14:24/29:Inlet/Thermometer adapter:15:24/29 …
Mini DC Vibration Motor Module 8800 RPM High Frequency Vibration Single-direction Rotation
$10.11Other Module BoardAdd to cartDescription Vibrator Motor is consist of an N20 Motor and a metal eccentric wheel. This N20 motor is has a 5V supply voltage. The output shaft has a rotational speed of 8800 RPM. Specifications can be seen below. With this product, you can implement a vibration function to your application. These days miniature vibrating motors …
Mini DC Vibration Motor Module 8800 RPM High Frequency Vibration Single-direction RotationRead More
D1 R2 V2.1.0 WiFi Uno Module Based ESP8266 Module Geekcreit for Arduino – products that work with official Arduino boards
$13.11Motherboard & Development BoardAdd to cartGithub:Click here to openMore information:Click here to openDescriptionBased on the ESP-8266EX.Compatible, you can use it on IDE.NodeMcu Compatible11 Digital I/O pins1 Analog Input pinOTA — Wireless Upload(Program)On board switching power supply — Max 24V input, 5V 1A outputWhat’s new about V2.1.0Use BRT (Bias Resistor Transistor), easier into flash mode.Optimize the circuit, the system is more …
1.54 inch Electronic Flexible ink Screen Display Module Black and White Dual Color e-Parper OLED
$39.35Display ScreenAdd to cartFeatureWorking voltage:DC 5VWorking current:150mAMaximum power:0.75WDisplay color:black and whiteDisplay size:1.54 inch/2.13 inchDisplay resolution:200*200/250*122Interface type:8pin header with 2.54mm pitchOperating temperature range:-20C to +60CPositioning hole size:diameter 3mmHeight:7mmPackage includes1 x Display board
AD/DA Extension Board PCF8591 GPIO 3.3V 5V for Raspberry Pi 4B/3B+/3B
$34.43Raspberry Pi & Orange PiAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.SpecificationsSize:65*56*24mm Weight:27gPins:Raspberry Pi GPIOOutput Voltage:3.3V/5V (IO VCC:3.3V)Analog Port-Input:4 Analog inputs are converted to Digital AD input-Output:Digital input simulated to Analog DA outputDigital Port:27 Digital IOI2C:3 Way I2C(BCM2,3)Serial Port:1 Way Serial Port(BCM14,15)SPI:1 Way …
AD/DA Extension Board PCF8591 GPIO 3.3V 5V for Raspberry Pi 4B/3B+/3BRead More
Wooden Christmas Advent Calendar Christmas Elk Decoration Fits 25 Circular Chocolates Candy Stand Rack
$21.57ChemistryAdd to cartSpecificationName:Wooden Christmas CalendarSize:Approximately 40x35cm (15.7X13.8in)Material:WoodenFeatureIt is sent flat packed, simply slot the stand together and place the tree into the stand and fill with your chocolates.Package Included1 x Christmas Calendar (The Chocolate is NOT included)
3PCS USB Microphone for Raspberry Pi
$27.14Raspberry Pi & Orange PiAdd to cartFeature1. Sensitivity:-47dB ÷ 4dB2. Sensitivity reduce:-3dB at 1.5V3. Working Voltage:4.5V4. Frequency response:100 ~ 16kHz5. SNR:More than -67dB6. Cable length:0.7-0.9MThe effective distance of 2 meters or morePackage included3xUSB Microphone For Raspberry Pi
Reviews
There are no reviews yet.