2Pcs DC12V ESP8266 4 Channel Wifi Relay IOT Smart Home Phone APP Remote Control Switch Module
$43.73
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Documents
Instructions:Click here to open
Other tools and files:Click here to open
APP:Click here to open
Note:This product can only use one app control (Manufacturer-provided), not support other apps.
Description
12V ESP8288 four ways WiFi relay module carried a ESP-01 WiFi module and mature 8 bit MCU.
It could control the relay by cell phone APP within the local area network (LAN).It is easy to set .
Function features
1. On board high quality MCU and ESP-01WIFI module
2. Two working mode
Mode 1:cellphone carry on wifi module directly
Mode 2:cellphone and wifi module carry on router together
Additional function:work as USB module when disconnect ESP-01 module
3. Transmission distance
(1) The open environment, the mobile phone when carrying on the WIFI module maximum transmission distance of 100 m;
(2) When the WiFI module and cell phone carrying on the router at the same time the signal transmission distance depends on router signal
4. Use the Smartconfig technology to complete the configuration of the account and password of the esp-01 WIFI module on the mobile APP. The configured account and password will be memorized after power off
5. The board contains 12V, 10A/250V AC 10A/30V DC relay, which can continuously absorb 100,000 times, with the protection of diode current and short response time.
6. With mode option and working statue LED indicator
7. With 4 isolator and strong anti interference ability
8. Reserved UART debug interface and MCU download port for program
9. Board size:60 x 63mm
Interface
IN+, IN-:12V voltage input
12V, GND, TX, RX:UART serial port PIN
SWIM, PIN8, NRST:reserved MCU download port
Button S1:change mode, default mode is mode 1
Button S2:reset
LED D1/D2/D3/D4(red ):relay working LED, LED on when relay is on
LED D7(red ):indicator for mode 1
LED D5(blue):indicator for mode 2
LED D6(green):work statue indicator, exact details as below
(1)When extinguished, it is being configured or disconnected from the router.
(2)0.5s fast blinking represents cellphone app is configuring WIFI account and password for ESP-01 module
(3) 2S slow blinking to configure finished ,and wait for connection with cellphone by TCP
(4)LED always on represents TCP connections with mobile phone successfully
Connection for reserved two cap jumper
Generally, insert them to the bottom ,that is RX to RX1, TX to TX1. Insert them to upper ,when use it as USB module
COM1 COM2 COM3 COM4:Common terminal
NC1 NC2 NC3 NC4:normal close
NO1 NO2 NO3 NO4:normal open
Control command for relay(hex format)
Open relay 1:A0 01 01 A2
Close relay 1:A0 01 00 A1
Open relay 2:A0 02 01 A3
Close relay 2:A0 02 00 A2
Open relay 3:A0 03 01 A4
Close relay 3:A0 03 00 A3
Open relay 4:A0 04 01 A5
Close relay 4:A0 04 00 A4
Package included
2 x DC12V ESP8266 Four Channel Wifi Relay
Weight | 0.122 kg |
---|
Customers Also Viewed
5Pcs 8*4 Level indicator Kit SMD Soldering Practice Board Audio Spectrum indicator
$46.40DIY Electronic KitsAdd to cartInstalltion instruction:http://img.staticbg.com/file/products/20180108011808ASD-84S-LED-Audio-spectrum-kit.pdfFeatureModel:ASD-84SWorking voltage:DC5VStandby current:≤ 5mAWorking current:≤35mASignal input method:3.5mm audio cableLED color:0805 red, green, blue, yellowPCB size:64.2mm x 36.5mmPCB mounting hole:3mmPCB mounting hole spacing:58.1 x 30.5mmNote:When installing the LED, please keep the same line in the same color.Button method:Operating mode:Screen display:Function setting Description:Default settingShort press:Fast flash mode:3:Display refresh very fast, very dynamic:2Medium speed mode:2:Display refresh is …
5Pcs 8*4 Level indicator Kit SMD Soldering Practice Board Audio Spectrum indicatorRead More
2Pcs TEC1-12712 40*40MM Semiconductor Refrigeration Chip High Power 12V10A Constant Temperature
$26.23Other Module BoardAdd to cartFeatureChip model:TEC1-12712Dimensions:40*40*3.6mm element pairs 127Wire specification:lead length 100÷5mm RV standard wire single head 5mm tinnedInternal resistance:1.0~1.2┯ (ambient temperature 23÷1→, 1kHZ Ac test)Maximum temperature difference:Tmax(Qc=0) 55→Working current:Imax=12A (at rated voltage start)Rated voltage:DC12V (Vmax:15.5V)Cooling power:Qcmax 72WAssembly pressure:85N/cm2Working environment:temperature range -55→∥83→ (high ambient temperature will directly affect the cooling efficiency)Packaging process:standard 704 silicone rubber seals aroundPackaging standard:foam box …
40khz 35W Ultrasonic Piezoelectric Cleaning Transducer Ultrasonic Plate
$22.26Switch AccessoriesAdd to cartSpecificationsModel:CH-S42-50×2.6Resonant frequency (KHz):40 ± 1Static capacitance (pF):8000 ± 10%Resonance impedance (Ω):≤20ΩDimensions:50 * 2.6mm (diameter * height)Power (W):35wInsulation resistance (2500V DC):≥ 100MΩFeatures1. Low heat. 2. Good thermal stability.3. Frequency and static capacitance strong consistency.4. Resonant impedance is low. 5. The average length of life.6. It can be widely used in a variety of ultrasonic cleaning equipment.7. …
40khz 35W Ultrasonic Piezoelectric Cleaning Transducer Ultrasonic PlateRead More
5pcs KY-004 Electronic Switch Key Module AVR PIC MEGA2560 Breadboard
$5.10Other Module BoardAdd to cartSpecifications 1. Rating:50mA 12VDC. 2. Contact Resistance:50mΩ max. (initial) 3. Insulation Resistance:100MΩ.(minDC 250V) 4. Dielectric Strength:AC250V.(50/60Hz for 1minute) 5. Electrically Life:100,000cycles. 6. Environment Temperature:-25° to +105°. 7. Operating Force:180/230.(±20gf) 8. Seal Temperature:250°-280°. Key switch module and a digital interface, built-in 13 LED build a simple circuit to produce key warning lamp.13 comes with digital interfaces …
5pcs KY-004 Electronic Switch Key Module AVR PIC MEGA2560 BreadboardRead More
ESP32-Aduio-Kit WiFi+ bluetooth Module ESP32 Serial to WiFi Audio Development Board with ESP32-A1S
$34.98Motherboard & Development BoardAdd to cartESP32-A1S:Click here to openInstruction:Click here to openIntroductionESP32-Audio-Kit is a small audio development board based on ESP32-A1S module. Most audio peripherals are distributed on both sides of the development board, supporting TF card, headphone output, two microphone inputs and two speaker outputs. It is convenient for developers to develop quickly. Suitable for home smart devices, smart …
10pcs Smart Electronics CD74HC4067 16-Channel Analog Digital Multiplexer PCB Board Module Geekcreit for Arduino – products that work with official Arduino boards
$15.59Other Module BoardAdd to cartSpecifications1.2V to 6V operation 2.“On Inch resistance:70 Ohms @ 4.5V 3.6ns break-before-make @ 4.5V 4.Wide operating temperature range:-50→ to 125→Features– This is a pcb board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.– This chip is like a rotary switch – it internally routes the common pinto one of 16 channel pins (CHANxx).– It works …
20pcs TK1305A 12V DC Multifunctional Time Delay Relay Module with Optocoupler Isolation
$89.45Relay ModuleAdd to cart>>>Manual:Click here to openFeaturesFunction 1:Trigger once (relay), then trigger once disconnect (disconnector), each time the relay is triggered once, the module has self-locking function.Function 2:Turn on immediately after triggering, and disconnect after the delay time arrives.Function 3:Disconnect immediately after triggering, and turn on after the delay time has elapsed. (Note:the relay will not be turned …
20pcs TK1305A 12V DC Multifunctional Time Delay Relay Module with Optocoupler IsolationRead More
Reviews
There are no reviews yet.