CN3791 MPPT Solar Panel Voltage Regulator Controller 6V 9V 12V 1 Cell Lithium Battery Charge Solar Panel Charger Board Controller Module
$15.30
Voltage 6V / Voltage 9V / Voltage 12V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
This is a maximum power poin tracking (MPPT) solar charger for single-cell LiPo batteries. This MPPT solar charger provide you with the ability to get the most possible power out of your solar panel or other photovoltaic device and into a rechargable LiPo battery. Set-up is easy as well, just plug your solar panel into one side of the solar charger and your battery into the other and you are good to start charging!
Solar maximum power poin tracking (MPPT) is to ensure that the light intensity change, photovoltaic cells output maximum power, to make full use of solar energy. In general, need to use a switch mode DC – DC converter to realize MPPT function, keep the output voltage and charging current product maximize (output).
The output of the Solar Charger is intended to charge a single polymer lithium ion cell. The load should be connected in parallel with the battery. Each Solar Charger comes equipped with a CN3791 power tracking battery charging circuit and pre-installed four 2-pin JST/PH2.0 connectors.
Default we have set the holding voltage for MPPT. So we have 3 version for the input voltage 6V/9V/12V(for Solar Panel working voltage 6V/9V/12V), very suitable for the application of the input voltage and battery voltage difference is bigger.
Features
Trickle charging of deeply discharged batteries
Automatic recharge
Charge status and charge end status indication
Soft start
Battery overvoltage protection
Solar panel maximum power poin tracking
Complete charge management for single-cell lithium batteries
Specifications
Input voltage:select the corresponding module according to the nominal voltage of the solar panel (6V/9V/12V)
Output voltage:nominal 3.7V full charge voltage 4.2V lithium battery
Interface:2-pin JST connectors (or PH2.0)
Max Charging current:2A
PWM switching frequency:300KHz
Charging voltage:4.2V ÷ 1%
Working environment temperature:-40 C to +85 C
Size:45X20X9.5mm
Note
1.If the CN3791 MPPT Solar Charger is 9V version, you must use the Solar panel working Voltage is 9V.
2.Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Included
1 x CN3791 MPPT Solar Panel Regulator Module 6V/9V/12V
Weight | 0.1 kg |
---|
Customers Also Viewed
3 x 100pcs RM065 Horizontal Trimpot Potentiometer Assortment Kit with Storage Box
$33.28Electronic Accessories & SuppliesAdd to cartSpecificationsModel Number:RM065Operating Temperature:-5 °C to +70 °CTechnology:Carbon FilmType:Trimming PotentiometerRated Power:0.1WResistance Tolerance:±20%Max. Operating Voltage:50VResistance:100 ohm-1M ohm (Variable Resistor)Package included3 x 100pcs 10 Values RM065 Horizontal Trimpot Potentiometer Assortment Kit
ICE-Tower CPU Cooling Fan V2.0 Super Heat Dissipation Different Colors LEDs for Raspberry Pi 3B+/4B
$46.37Raspberry Pi & Orange PiAdd to cartDescriptions1. According to Moore’s law, the design of high-speed and high-density printed circuit board (PCB) is becoming more and more complex.2. Higher processing performance will generate more heat. 3. This super ICE Tower CPU Cooling Fan for Raspberry Pi is burned for solving heat dissipation problem! 4. Tower structure, 5mm copper tube, multi-layer heat sinks, …
20pcs WITRN-CC001 TYPE-C Male to Female Connector TYPE-C Adapter Board Test Fixture Module
$201.72Converter BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.FeaturesAll interfaces of TYPE-C adapter board are led out, all interfaces are independent, which is convenient for TYPE-C development and debugging.Package Included20 x WITRN-CC001 TYPE-C Adapter Board
3pcs M5Stack SG90 Servo 9G SERVO Plastic Teeth Work with 8Servos HAT and PuppyC
$34.70Other Module BoardAdd to cartDescriptionSG90 servo is a M5Stack custom 9g servo.The angle of rotation is 0°~180°,it can be used with 8Servos HAT and PuppyC.This small servo is very easy to use for beginners. You don’t have to use a dedicated drive board with feedback control,Any common servo driver and microcontroller can easily turn it up.Compared to driving a …
3pcs M5Stack SG90 Servo 9G SERVO Plastic Teeth Work with 8Servos HAT and PuppyCRead More
Wireless Electric 360 Spin Cleaning Brush Floor Kitchen Household Brush +5 Heads
$87.06Switch AccessoriesAdd to cartFeatures1. Perfect Multiple Cleaning Tasks — Automatic cleaning scrubber can be used indoor and outdoor, it’s great for curves, tile, sink bowls, toilets, bathtub, door slots, shower windows, it also cleans car tires and mags well.2. Harsh and Abrasive Cleaners — Our flexible bristles mold into cracks and crevices, corners, and shower tracks for a …
Wireless Electric 360 Spin Cleaning Brush Floor Kitchen Household Brush +5 HeadsRead More
Reviews
There are no reviews yet.