CN3791 MPPT Solar Panel Voltage Regulator Controller 6V 9V 12V 1 Cell Lithium Battery Charge Solar Panel Charger Board Controller Module
$15.30
Voltage 6V / Voltage 9V / Voltage 12V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
This is a maximum power poin tracking (MPPT) solar charger for single-cell LiPo batteries. This MPPT solar charger provide you with the ability to get the most possible power out of your solar panel or other photovoltaic device and into a rechargable LiPo battery. Set-up is easy as well, just plug your solar panel into one side of the solar charger and your battery into the other and you are good to start charging!
Solar maximum power poin tracking (MPPT) is to ensure that the light intensity change, photovoltaic cells output maximum power, to make full use of solar energy. In general, need to use a switch mode DC – DC converter to realize MPPT function, keep the output voltage and charging current product maximize (output).
The output of the Solar Charger is intended to charge a single polymer lithium ion cell. The load should be connected in parallel with the battery. Each Solar Charger comes equipped with a CN3791 power tracking battery charging circuit and pre-installed four 2-pin JST/PH2.0 connectors.
Default we have set the holding voltage for MPPT. So we have 3 version for the input voltage 6V/9V/12V(for Solar Panel working voltage 6V/9V/12V), very suitable for the application of the input voltage and battery voltage difference is bigger.
Features
Trickle charging of deeply discharged batteries
Automatic recharge
Charge status and charge end status indication
Soft start
Battery overvoltage protection
Solar panel maximum power poin tracking
Complete charge management for single-cell lithium batteries
Specifications
Input voltage:select the corresponding module according to the nominal voltage of the solar panel (6V/9V/12V)
Output voltage:nominal 3.7V full charge voltage 4.2V lithium battery
Interface:2-pin JST connectors (or PH2.0)
Max Charging current:2A
PWM switching frequency:300KHz
Charging voltage:4.2V ÷ 1%
Working environment temperature:-40 C to +85 C
Size:45X20X9.5mm
Note
1.If the CN3791 MPPT Solar Charger is 9V version, you must use the Solar panel working Voltage is 9V.
2.Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Included
1 x CN3791 MPPT Solar Panel Regulator Module 6V/9V/12V
Weight | 0.1 kg |
---|
Customers Also Viewed
LM338K 3A Voltage Digital Display High Power Adjustable Linear Module Buck Step Down Regulator
$29.73Power Supply ModuleAdd to cartParameterBoard size:9.6cm x 5.8cmDC input:3-35 voltsAC input:1-25 voltsOutput DC:1.2-30 volts; kit weight:155 gramsMaximum current:3 amps, (LM338K theory can go to 5A, we use domestic LM338K, up to 3A, import disassemble up to 5A)Input and output minimum differential:3 voltsMaximum power consumption:50WAbout LM338K maximum power calculationFor example, input 25V, output 18v load current 2A, then the power …
5Pcs Yushun LS-5S 24V 5W AC to DC Switching Power Supply Module Monitoring Power Supply with White Shell
$32.16Power Supply ModuleAdd to cartFeatures1. Wide input voltage range2. With overload, short circuit and over temperature protection functions3. Small size, high efficiency4. Full load aging test5. Ultra-low output rippleSpecificationBrand:EshionModel:LS-5SVoltage:24V200mA LS-5S24Modulation method:pulse width modulation (PWM) typeTransistor connection mode:single-endedInput voltage:86-264VInput voltage range:100~264V ACOutput /Rated power:5WOutput voltage:24VWork efficiency:75%~76%Output ripple noiseVoltage adjustment rate:÷1%Load regulation rate:÷1%Product Certification:CEOutput current:0.2AFrequency range:47~63HZWorking temperature:-20→~+50→Dimensions:58mm*30mm*22mmWeight:25g(1pcs)Package included5 x Power Supply …
SIM7020C NB-IoT Expansion Board Full Netcom Module Support for Arduino LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS
$52.47Expansion Board & ShieldAdd to cartFeatureOnboard Raspberry Pi interface, can be directly inserted into any version of Raspberry PiSupport LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS and other protocol communicationsSupport domestic OneNET/telecom cloud/aira cloud platformOnboard USB interface, can be used for power supply or software debuggingLead out UART control interface, can be used to connect Arduino/STM32 and other main control boardsOnboard level conversion circuit, the default …
10pcs 3.3V 5V 8 Bit Blue Common Anode LED indicator Display Module DIY Kit
$21.59Display ScreenAdd to cartDescriptionIt can be inserted directly into Breadboard,Ideal for linking up to your Arduiuo UNO Mini Nano Mega2560 DUE Breadboard etc,or others MCU ( AVR STM32 ARM7 ARM9 ARM10 ARM11 PIC C8051 STC MSP430 FPGA/CPLD etc.) SpecificationsColor:BlueWorking Voltage:DC 3-24VPolarity:Common anodeInterface:2.54MM with PIN/2.54MM no PINSize:22.86 x 14.13 x 2.11 mmWeight:1.3gApplicationMCU/ARM/FPGA/Atmega328pPLC MotorElectronic diy kitESP8266/nodemcuNANO/UNO/MEGA2560/BreadboardRaspberry pi 4/robotPackage Incldued10 x …
10pcs 3.3V 5V 8 Bit Blue Common Anode LED indicator Display Module DIY KitRead More
infrared Light Board 42*IR LED Board for CCTV Camera Night Vision 850nm DC12V
$6.55LED BoardAdd to cartDescription– Infrared IR LED boards for CCTV cameras night vision.– Power supply exceeds DC13V may greatly reduce the LEDs operating life.SpecificationsBoard Diameter:60 mminner Diameter:32mmPower Supply:DC12V / 220mA Operation Temperature:-10→ to +50→LED Lamps / Bulbs Size:5mmIR Lights WaveLength:850nmPackage Included1 x 42*IR LED Board for CCTV Camera
10pcs XY-SP5W 5128 Mini Class D Digital Amplifier Board 5W Mono Audio Power Amplifier
$15.27Amplifier BoardAdd to cartFeatures∵ Operating current:>1A∵ Power Output:3~5W∵ Drive Speaker:4~8∵ SNR:85dB@ VDD=5V,Vorms=1V∵ Class D Audio Amplifier∵ Low Distortion, Low Noise FloorNotes1.2.5V to 5.5V operation from a single supply ,and damaged upper 5.5V.2.A 5V/1A DC adapter is recommended to supply the module.3.The circuit will be damaged if the power polarity is oppsite.4.4 3W Speaker is recommended5.With mute fuction, Mute …
10pcs XY-SP5W 5128 Mini Class D Digital Amplifier Board 5W Mono Audio Power AmplifierRead More
10Pcs 2 Key Press Film Switch Module Single Chip Microcomputer Extended Keyboard Electronic Switch Module
$16.11Other Module BoardAdd to cartSpecificationsProduct thickness:1.00mm (+0.02mm)Panel material:PCBack adhesive tape:white glueButton strength:280gTemperature:-15 ° C / +65 ° CCircuit material:0.125mm PET transparentButton package type:button planeButton package height:0.3mmKey life:>100,000 timesLoop resistanceConnector:2.54mm square hole with protective coverSize:40*20mmPackage Included10 x 2 Key Press Film Switch
Reviews
There are no reviews yet.