5Pcs MPR121-Breakout-v12 Proximity Capacitive Touch Sensor Controller Keyboard Development Board
$24.54
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
This is a breakout board for Freescale’s MPR121QR2. The MPR121 is a capacitive touch sensor controller driven by an I2C interface.
The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode. The MPR121 also features eight LED driving pins. When these pins are not configured as electrodes, they may be used to drive LEDs.
There a four jumpers on the bottom of the board, all of which are set (closed) by default. An address jumper ties the ADD pin to ground, meaning the default I2C address of the chip will be 0x5A. If you need to change the address of the chip (by shorting ADD to a different pin, make sure) you open the jumper first. Jumpers also connect SDA, SCL and the interrupt pin to 10K pull-up resistors. If you don’t require the pull-up resistors you can open the jumpers by cutting the trace connecting them.
There is no regulation on the board, so the voltage supplied should be between 2.5 to 3.6VDC. The VREG pin 2.5 and is connected through a 0.1uF capacitor to ground, which means, unless you modify the board, you can’t operate the MPR121 in low-supply voltage mode (1.71-2.75VDC).
Package included
5 x MPR121-Breakout-v12 Proximity Capacitive Touch Sensor Board
Weight | 0.02 kg |
---|
Customers Also Viewed
7S 18650 Lithium Battery Charging Balancing Board Polymer Battery Protection Board 11.1- 33.6V DC
$8.73Power Supply ModuleAdd to cartFeatures– 4.2V equalization voltage, equalization current is 66mA;– Product size:37.3*25.8*2.4mmSolder Joint DescriptionB-:Connect the negative pole of the battery packB1:Connect the contacts in battery 1 and battery 2B2:Connect the contacts in battery 2 and battery 3B3:Connect the contacts in battery 3 and battery 4B4:Connect the contacts in battery 4 and battery 5B5:Connect the contacts in battery …
Ozone Generator Tube Sterilizer DIY Accessories 220V 10W 200mg / H 63x61x30mm
$18.06Electronic Accessories & SuppliesAdd to cartFeaturesSmall volume, large output, high concentrationInstant sterilization and disinfection, continuous and stable operationSpace saving installationSolve allergies, bacterial infections, low immunity, odor and other problemsSpecificationsName:Ozone generator Model:F24209Material:ABSPower:10WVoltage:220 (V)Working high voltage:2.5-3KVAir source:air sourceOxygen production:200mg / hOzone generation method:tubular corona dischargeSize:63x61x30mmSterilization rate:99.9 (%)Package included1 x Ozone generator
Engine Coolant Temperature Temp Sensor Sender Fits for Mercruiser 805218T
$24.29Terminal BlocksAdd to cartSpecifications– Size:Approx. 56x21x21mm / 2.20×0.83×0.83inch– Manufacturer Part Number:805218T– Connector:2 PinsFeatures– Stable characteristics, high reliability.– Precise design and durable in use.– Easy to install, directly replace the old or worn one.Package Includes1 x Boat Engine Temperature Sensor
20pcs JK11-PB Time Delay Relay Module 0-100S Adjustable Delay 0.5S Open for Computer Automatic Start
$99.67Relay ModuleAdd to cartFeatures– Function:After the button is triggered, the delay starts. After the time is reached, the relay is pulled for about 0.5 seconds and then released.– The delay time is adjustable from 0.1 second to 100 seconds. The adjustable resistance on the board is clockwise for longer and counterclockwise for shorter time.– Used to delay switching …
3Pcs Keyes Brick Flame Sensor (pad hole) with Pin Header Module Digital Signal and Analog Signal
$11.54Sensor & Detector ModuleAdd to cartDescriptionThis sensor is fully compatible with ARDUI NO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. It can detect flames or light sources with a wavelength in the range of 760 nanometers to 1100 nanometers. Its detection angle is about 60 degrees. It is particularly sensitive to the flame …
650nm 5mW Focusable Red Line Laser Module Laser Generator Diode
$10.11Laser ModuleAdd to cart650nm 5mW Focusable Red Line Laser Module Laser Generator DiodeDescriptionThis 5mW red line laser module is suitable for industrial equipment usage such as concentricity and equipment positioning with stable output power and long lifetime.SpecificationsOptical Power:5mWWavelength:650nm(red laser)Voltage:DC 3-5VCurrentBeam Shape:lineEmitting Angle:120°Power Cord Length:135mm(5.31inch)Lens Material:plasticSize:Φ12X35mmFeature650nm focusable red line laser moduleSupply current does not vary with the voltage ranging …
650nm 5mW Focusable Red Line Laser Module Laser Generator DiodeRead More
1000Pcs Cardboard 18650 Battery insulators Electrical insulating Adhesive Paper
$17.86Electronic Accessories & SuppliesAdd to cartFeaturesOuter Ring Diameter:17mm/0.67inch(appr.)Inner Ring Diameter:10mm/0.39inch(appr.)Thickness:0.24mm/0.01inch(appr.)Package included:1000Pcs Battery Insulators Adhesive Paper (Battery not included)2 Sheets included, 100 insulators adhesive paper rings per sheet, total is 200 ringsAdhesive cardboard paper for 18650 battery insulator.Better protection to avoid short circuit on batteries.Easy peel and stick application.Package included1000 x Battery Insulators Adhesive Paper
Reviews
There are no reviews yet.