10pcs Geekcreit Yellow Halloween Horror Pumpkin Head Mummy Ghost Screaming DIY LED Flash Kit
$49.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
This DIY kit is designed as two Halloween cartoon characters:pumpkin head and mummies, plus two mummy LED eyes that will gradually glow, increasing the festive on Halloween. When the button is pressed, the horn will automatically play the horrible ghost sound. After the sound stops, the LED will automatically switch to the LED breathing gradient mode. Just a CR2032 power supply, you can carry it with you, it is a nice simple Halloween DIY production kit.
Manual:Click here.
Features
Two cute Halloween cartoon characters composed of yellow and white are composed of PCB circuit boards;
Built-in speakers to play horror ghosts, enhance the festive;
The two LED lights will follow the horror ghosts, and the sound will automatically switch to the LED breathing gradient mode after the sound is played.
The trigger button automatically plays the horrible ghost sound;
Powered by a CR2032 button battery;
Two LED colors are available:red, yellow;
PCB size:60mm x 99mm;
Function
1. Load a CR2032 button battery to supply power;
2. Turn the power switch to turn on the power;
3. Press the button to automatically play the ghost sound twice, and the LED flashes at the same time;
4. After the sound is played, the two LEDs are automatically switched to the breathing gradient mode;
Package included
10 x Halloween Horror Pumpkin Head Mummy Ghost Screaming DIY Kit(Battery not included)
Weight | 0.28 kg |
---|
Customers Also Viewed
Solar Powered Floating Bird Bath Water Fountain Pump Pond Pool Water Pump
$42.51Electrical Pump & ValveAdd to cartDescriptionThis product is solar-powered decorative fountain.It is made up of highly efficient solar panel and new brushless pump.IT is start-up fast,efficient and strong stability.In addition,it has no electric outlet or external battery,so it’s not only easy to use,but also safe.This product is suitable for bird bath,fish tank,small pond,garden decoration,water circulation for oxygen,etc.FeatureSolar panel:7V/1.4WBrushless pump input:DC4.5-10VMaximum …
Solar Powered Floating Bird Bath Water Fountain Pump Pond Pool Water PumpRead More
Vibration Switch Sensor Module Vibration Sensor Alarm Module Smart Car Accessories
$4.36Sensor & Detector ModuleAdd to cartFeatures 1. Onboard LM393 voltage comparator chip and vibration sensing probe2. Support 5V/3.3V voltage input3. Onboard signal output indication, the output valid signal is low level and the indicator light is on, the output signal can be directly connected with the single chip IO4. The sensitivity of signal detection can be adjusted5. With 3mm screw …
Vibration Switch Sensor Module Vibration Sensor Alarm Module Smart Car AccessoriesRead More
TPA3116 Dual Channel 50Wx2 Digital Amplifier Board
$23.15Amplifier BoardAdd to cartSpecificationPower amplifier chip:TPA3116Power supply voltage:11 ~ 26VDC DC input with limit reverse polarity protection(Recommended DC 24V current 3A and above switching power supply)Output power:stereo 50W + 50W, PBTL monaural 100WLoad impedance:4 to 8 ohms (horn speaker impedance)Audio input:2.54mm3 pin seatPackage Included1 x Digital Amplifier Board
5pcs Geekcreit 3 in 1 AC 60-500V 100A Square Yellow LED Digital Voltmeter Ammeter Hertz Meter Signal Lights Voltage Current Frequency Combo Meter indicator Tester with Round CT
$48.24Electronic Accessories & SuppliesAdd to cartDescriptionDisplay:Voltage, current, frequencyDisplay color:YellowMeasuring voltage range:60~500V AMeasuring current range:6~100AMeasuring frequency range:20-70HzSize:2.8*5cm/1.10inch*1.97inch (D*H)Note:Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!!Package included5 x 22MM Indicator5 x Round CT
5pcs Nano V3.0 Terminal Adapter AVR ATMEGA328P without NRF2401+ Expansion interface DC Power Board
$38.18Expansion Board & ShieldAdd to cartFeature1. The item is a terminal expansion adapter, working very well for prototyping Nano projects2. There are pins expansion hole for the NANO board, which can directly lead the pins; With DC power supply interface, you can directly add external power or battery to supply power3. With NRF2401+ expansion interface, you can insert NRF2401+ to …
Reviews
There are no reviews yet.