ESP8285 ESP-1 Serial Wireless WiFi Transmission Module with ESP8266
$10.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The WiFi module ESP-1 is manufactured by using a high-performance chip ESP8285.
This small chip is encapsulated an enhanced Tensilica’s L106 diamond series 32-bit kernel CPU with a SRAM.
Thus, ESP8285 has the complete function Wi-Fi function; it not only can be applied independent but can be used
as a slaver working with other host CPU. When ESP8285 is applied as a slave, it can start from the onboard Flash.
The built-in high-speed buffer is not only benefiting improve the system performance but optimizing the store system. In addition, ESP8285 can be used as Wi-Fi adapter by SPI/SDIO or I2C/UART interface, when it is applied to other MCU design.
, please visit this GitHub link to get the manual and tools, https://github.com/Smart/SZDOITWiKi/wiki/ESP8285—ESP-1
Features
Ultra-small size;
Support serial to WiFi;
Wireless transparent transmission;
Long distance transmission with ultra-low power;
Support outboard antenna;
Bearing high temperature to 125 →, compared to the 85→ for ESP8266.
Working temperature:-40→-125→
Module size:24.5mm*14mm;
SOC characteristics
Built-in Tensilica L106 ultra-low power consumption 32-bit CPU, the main frequency can be
80MHz and 160MHz, also support RTOS;
Built-in TCP/IP protocol stack;
Built-in 1 channel 10-bit high precision ADC;
The outside interfaces have HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO;
The deep-sleep current is about 10uA, and the cut-off current is smaller than 5uA;
Can be wake-up within 2 ms, and connect to transmit data package;
the consumer power is smaller than 1.0mW (DTIM3) when at standby status;
built-in 1M byte for SPI Flash.
Wi-Fi characteristics
Support 802.11 b/g/n/e/i
Support three modes:Station, SoftAP, and SoftAP+STA;
Support Wi-Fi Direct(P2P);
Support hardware acceleration for CCMP (CBC-MAC, computation mode), TKIP (MIC, RC4),
WAPI(SMS4), WEP(RC4), CRC;
P2P find, P2P GO mode/GC mode and P2P power management;
WPA/PA2 PSK and WPS;
Support 802.11 i security:pre-certification and TSN;
Support 802.11n (2.4 GHz);
802.1h/RFC1042 frame encapsulation;
Support seamless roam;
Support AT remote updation and cloud OTA updation;
Support SmartConfig function for Android and iOS device SmartConfig.
Peripheral for Module
1*UART;
1*En;
MAX 4* GPIOs;
Application
Serial Transparent transmission;
WiFi probe;
Smart power plug/Smart LED light;
Mesh networks;
Sensor networks;
Wearable electronics;
Securit ID label;
Wireless location recognition;
Wireless location system beacon;
Industrial wireless control.
Package included
1 x ESP8285 ESP-1 Serial Wireless WiFi Transmission Module
Weight | 0.006 kg |
---|
Customers Also Viewed
500 Pcs 1W 1% Metal Film Resistor 100 Value 10 ohm-1M ohm Assortment Kit
$32.79Electronic Accessories & SuppliesAdd to cartDescriptionResistance:10 ohm – 1M ohmResistor tolerance:+/-1%Power:1WMax. working voltage:500VMax. overload voltage:1000VTemperature coefficient:-55°C to +175°CSize:11*5mm/0.43*0.19inchValue:100Quantity:500PCS (5PCS in each type)FeaturesDurable and easy to installVery convenient and practicalVery popular among the electronic loversPackage includes500 x Resistor
12V/24V LCD Display intelligent Car Motorcycle Charger Lead Acid Battery Charger
$72.89AC/DC AdaptersAdd to cartFeatures-Short circuit protection. Low-voltage protection. Overvoltage protection. Overcurrent protection. Overheating protection. Smart security protection. Overall earthquake resistance. Overcharge and overdischarge protection. Reverse connection protection-Efficient, insurance, energy saving-Overshoot over discharge protection-The overall earthquake drop-Intelligent security protection-Fast, high frequency technology with 3-stage charging-One touch automatic charging; LCD display-Battery detection, short circuit protection, over voltage protection,Anti – reverse …
12V/24V LCD Display intelligent Car Motorcycle Charger Lead Acid Battery ChargerRead More
3Pcs DC-DC High Voltage Adjustable Step-down Vehicle Power Module 60 80V 8-80 to 15 12 9 5 3.3V
$19.67Power Supply ModuleAdd to cartModule parametersName:High voltage step-down non-isolated DC-DC converter moduleInput voltage:8-80V wide input voltage rangeMaximum duty cycle:85%Conversion efficiency:93%Max (efficiency is related to input and output voltage and load size)Minimum pressure difference:2VOutput voltage range:1.25V-20V adjustable (input voltage needs to be higher than output voltage and cannot be boosted)Maximum output current:2.1AMaxMaximum output power:20WMax, within 12W for long time work.Switching …
CJMCU-1335 3.3V/5V I2C SPI Hall Effect 360 Non-Contact X-Y Plane Angle Sensor Module
$24.30Sensor & Detector ModuleAdd to cartFeaturePower Supply:3.3V or 5VCommunication method:I2C, SPI. The default communication mode of the module is I2CRefresh rate:32us, 12bit resolutionPackage includes1 x Angle Sensor Module
TS600 4WD Shock Absorber Aluminum Alloy Frame 9V Motor Tank Chassis Car Kit for Robot
$403.46Smart Robot & Solar PanelAdd to cartFeaturesStrong load capacity, High obstacle avoidanceIt needs u to DIY by yourself. Let’s create your smart tank car!With 9V motor with Hall sensor, more powerful.Specifications– Product Name:TS600 Shock Absorber Tank Car– Color:Silver– Car Body:Aluminum alloy– Surface Treatment:Sandblasting Oxidation– Wheel:Aluminum alloy– Tracks:Engineeing plastic– Size:540* 280 *90mm (length * width * height)– Working Voltage:6~12V– Working Carrying Capaticy:6 …
TS600 4WD Shock Absorber Aluminum Alloy Frame 9V Motor Tank Chassis Car Kit for RobotRead More
BNO080 AR VR IMU Nine Axis 9DOF AHRS/IMU Sensor Module High Accuracy Accelerometer Gyro Magnetometer Virtual Reality 3D
$50.29Sensor & Detector ModuleAdd to cartMore document click to download:BNO08Product IntroductionThe BNO080 / 085 is a 9-axis system-in-package (SiP) that enables rapid development of sensor-enabled augmented reality (AR), virtual reality (VR), robotics and IoT devices.Featuring high-performance accelerometers, magnetometers and gyroscopes, the low-power 32-bit ARM Cortex M0 + MCUs are available in a small package.InterfacesThe BNO080 can communicate through a variety …
3pcs AC220V 3~20W 80 Degree PTC Ceramic Electric Heating Plate Aluminum Shell Constant Temperature Air Heater
$11.42Electronic Accessories & SuppliesAdd to cartDescriptionHeat methods:Heat radiation by air flowHeat material:PTC ThermistorLead length:about 150mmProduct wiring:bare wire is connected, regardless of positive or negative, can be connected to the rated voltage (low voltage products ensure sufficient current)Main usded in:clothes dryer / Air conditioning units / Equipment / General electric appliance / Air curtain machine etc.FeatureVoltage:220VTemperature:80 ° C(surface temperature:24→, ±10→)Dry burning …
Reviews
There are no reviews yet.