ESP8285 ESP-1 Serial Wireless WiFi Transmission Module with ESP8266
$10.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The WiFi module ESP-1 is manufactured by using a high-performance chip ESP8285.
This small chip is encapsulated an enhanced Tensilica’s L106 diamond series 32-bit kernel CPU with a SRAM.
Thus, ESP8285 has the complete function Wi-Fi function; it not only can be applied independent but can be used
as a slaver working with other host CPU. When ESP8285 is applied as a slave, it can start from the onboard Flash.
The built-in high-speed buffer is not only benefiting improve the system performance but optimizing the store system. In addition, ESP8285 can be used as Wi-Fi adapter by SPI/SDIO or I2C/UART interface, when it is applied to other MCU design.
, please visit this GitHub link to get the manual and tools, https://github.com/Smart/SZDOITWiKi/wiki/ESP8285—ESP-1
Features
Ultra-small size;
Support serial to WiFi;
Wireless transparent transmission;
Long distance transmission with ultra-low power;
Support outboard antenna;
Bearing high temperature to 125 →, compared to the 85→ for ESP8266.
Working temperature:-40→-125→
Module size:24.5mm*14mm;
SOC characteristics
Built-in Tensilica L106 ultra-low power consumption 32-bit CPU, the main frequency can be
80MHz and 160MHz, also support RTOS;
Built-in TCP/IP protocol stack;
Built-in 1 channel 10-bit high precision ADC;
The outside interfaces have HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO;
The deep-sleep current is about 10uA, and the cut-off current is smaller than 5uA;
Can be wake-up within 2 ms, and connect to transmit data package;
the consumer power is smaller than 1.0mW (DTIM3) when at standby status;
built-in 1M byte for SPI Flash.
Wi-Fi characteristics
Support 802.11 b/g/n/e/i
Support three modes:Station, SoftAP, and SoftAP+STA;
Support Wi-Fi Direct(P2P);
Support hardware acceleration for CCMP (CBC-MAC, computation mode), TKIP (MIC, RC4),
WAPI(SMS4), WEP(RC4), CRC;
P2P find, P2P GO mode/GC mode and P2P power management;
WPA/PA2 PSK and WPS;
Support 802.11 i security:pre-certification and TSN;
Support 802.11n (2.4 GHz);
802.1h/RFC1042 frame encapsulation;
Support seamless roam;
Support AT remote updation and cloud OTA updation;
Support SmartConfig function for Android and iOS device SmartConfig.
Peripheral for Module
1*UART;
1*En;
MAX 4* GPIOs;
Application
Serial Transparent transmission;
WiFi probe;
Smart power plug/Smart LED light;
Mesh networks;
Sensor networks;
Wearable electronics;
Securit ID label;
Wireless location recognition;
Wireless location system beacon;
Industrial wireless control.
Package included
1 x ESP8285 ESP-1 Serial Wireless WiFi Transmission Module
Weight | 0.006 kg |
---|
Customers Also Viewed
5pcs XH-M172 intermittent Working Module 0-999 Minutes Timing Working Module Output Switch Control Board
$41.46Power Supply ModuleAdd to cartFeatureProduct Name:Intermittent working moduleProduct model:XH-M172Input voltage:DC12VOutput type:relay output 10AService life:more than 100,000 timesWorking temperature:-30~60 degreesSetting range:1-999 minutesProduct size:53 x 35 x 16mmPackage includes5 x Intermittent working module
3 Axis GRBL USB Driver offline Controller Control Module LCD Screen SD Card for CNC 1610 2418 3018 Wood Router Laser Engraving Machine
$38.46Engraving Parts & AccessoriesAdd to cartDescriptionThis offline controller is designed for the use of Mini CNC router 1610/2418/3018 and even with more advanced function of tool set, limit switch supportive, Laser supportive; Offline and Bluetooth supportive.SpecificationFirmware:GRBL 08, 09, 1.1and so onInput Voltage:DC 7V- 36VApplicable CNC Router:3 Axis CNC router 1610; 2418; 3018Features1. Support GRBL and benbox firmware.Support CNC 3-axis laser …
Single Chip Microcomputer DC Motor Control Module L6201 Driver Module
$14.49Other Module BoardAdd to cartDescription The dc motor drive module is the L6201 chip drive module.L6201 is full control bridge drive chip ,which adopting multi sourcing technology BCD (Bipolar, CMOS, DMOS) to control motor. This chip can integrate independent DMOS field-effect transistors with CMOS and diodes on a single chip.L6201 can realize the optimization of logic circuits and power …
Single Chip Microcomputer DC Motor Control Module L6201 Driver ModuleRead More
ESP32S ESP32 0.5A Micro USB Charger Board 18650 Battery Charging Shield without Battery
$10.92Expansion Board & ShieldAdd to cartSpecifications Input port:Micro USB USB output type:Type-A 0.5A current charging 1 switch control USB output Input Voltage:5~8V Output:3V & 1A (x3)and 5V & 4A (x3) LED indicate:Green means full,Red means charging Size:9.8×2.9cm Note Be careful of inch+inch and inch-inch, You should follow the direction of inch+inchinch-inch on the PCB.If you put wrong direction, charging chip …
ESP32S ESP32 0.5A Micro USB Charger Board 18650 Battery Charging Shield without BatteryRead More
Red Laser Dot Sight Scope 20mm Picatinny Rail with 25mm Flashlight Ring Mount Clamp Holder
$26.31Laser SightAdd to cartNotice (Please read this first)1. This item runs on 3pcs AG13 / LR44 Batteries which are Not Included. You need to buy them at your Local Shop. Hope you consider it before order.2. Besides, The laser light image shown here is for reference only. In actual use, the laser light beam is INVISIBLE and it …
Red Laser Dot Sight Scope 20mm Picatinny Rail with 25mm Flashlight Ring Mount Clamp HolderRead More
Reviews
There are no reviews yet.