ESP8285 ESP-1 Serial Wireless WiFi Transmission Module with ESP8266
$10.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The WiFi module ESP-1 is manufactured by using a high-performance chip ESP8285.
This small chip is encapsulated an enhanced Tensilica’s L106 diamond series 32-bit kernel CPU with a SRAM.
Thus, ESP8285 has the complete function Wi-Fi function; it not only can be applied independent but can be used
as a slaver working with other host CPU. When ESP8285 is applied as a slave, it can start from the onboard Flash.
The built-in high-speed buffer is not only benefiting improve the system performance but optimizing the store system. In addition, ESP8285 can be used as Wi-Fi adapter by SPI/SDIO or I2C/UART interface, when it is applied to other MCU design.
, please visit this GitHub link to get the manual and tools, https://github.com/Smart/SZDOITWiKi/wiki/ESP8285—ESP-1
Features
Ultra-small size;
Support serial to WiFi;
Wireless transparent transmission;
Long distance transmission with ultra-low power;
Support outboard antenna;
Bearing high temperature to 125 →, compared to the 85→ for ESP8266.
Working temperature:-40→-125→
Module size:24.5mm*14mm;
SOC characteristics
Built-in Tensilica L106 ultra-low power consumption 32-bit CPU, the main frequency can be
80MHz and 160MHz, also support RTOS;
Built-in TCP/IP protocol stack;
Built-in 1 channel 10-bit high precision ADC;
The outside interfaces have HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO;
The deep-sleep current is about 10uA, and the cut-off current is smaller than 5uA;
Can be wake-up within 2 ms, and connect to transmit data package;
the consumer power is smaller than 1.0mW (DTIM3) when at standby status;
built-in 1M byte for SPI Flash.
Wi-Fi characteristics
Support 802.11 b/g/n/e/i
Support three modes:Station, SoftAP, and SoftAP+STA;
Support Wi-Fi Direct(P2P);
Support hardware acceleration for CCMP (CBC-MAC, computation mode), TKIP (MIC, RC4),
WAPI(SMS4), WEP(RC4), CRC;
P2P find, P2P GO mode/GC mode and P2P power management;
WPA/PA2 PSK and WPS;
Support 802.11 i security:pre-certification and TSN;
Support 802.11n (2.4 GHz);
802.1h/RFC1042 frame encapsulation;
Support seamless roam;
Support AT remote updation and cloud OTA updation;
Support SmartConfig function for Android and iOS device SmartConfig.
Peripheral for Module
1*UART;
1*En;
MAX 4* GPIOs;
Application
Serial Transparent transmission;
WiFi probe;
Smart power plug/Smart LED light;
Mesh networks;
Sensor networks;
Wearable electronics;
Securit ID label;
Wireless location recognition;
Wireless location system beacon;
Industrial wireless control.
Package included
1 x ESP8285 ESP-1 Serial Wireless WiFi Transmission Module
Weight | 0.006 kg |
---|
Customers Also Viewed
700W 5 Nylon Fiber Blades Wind Turbine Power Generator DC 24V Safe Aerogenerator
$1,101.59Alternative Energy GeneratorsAdd to cartFeaturesStarting wind speed is low, high wind energy utilization, small size, good looks, low operating vibration.User-friendly design:convenient equipment installation, maintenance and repair.Using high-power tracking intelligent microprocessor control, effective regulation of current and voltage.The shell is made of aluminum alloy die-casting, with double bearing carrier, strong anti-typhoon capacity, safe and reliable operation.The wind wheel and blade …
700W 5 Nylon Fiber Blades Wind Turbine Power Generator DC 24V Safe AerogeneratorRead More
10PCS 6PCS 6V 100mA 0.6W Polycrystalline Mini Epoxy Photovoltaic Solar Panel
$39.69Smart Robot & Solar PanelAdd to cartOn the use and testing ofProducts can only be in the sun, the nominal peak power is the midday sun, the sun early in the morning one night and not the strong sun is not up to the nominal, buyers pay attention to this point and in the light! inside the room, the solar panels …
10PCS 6PCS 6V 100mA 0.6W Polycrystalline Mini Epoxy Photovoltaic Solar PanelRead More
1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V To 5V DC-DC Boost Converter Module Board
$6.55Power Supply ModuleAdd to cartFeatureInput voltage 0.9-5V; output voltage 5VMaximum output current:480MaStarting voltage 0.8V, output current 7MAInput 1-1.5V, output 5V 40-100MAInput 1.5-2V, output 5V 100-150MAInput 2-3V, output 5V 150-380MAInput more than 3V, output 380-480MAOperating frequency:150KHZTypical conversion efficiency:85%Pin 2.54MM spacingSize:11mm x 10.5mm x 7.5mm (very small)Weight:about 1 gNote1. the input voltage is not greater than the nominal voltage, otherwise it …
1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V To 5V DC-DC Boost Converter Module BoardRead More
AC 80-300V 3in1 LCD Time Voltage Frequency Combo Meter for Generator
$25.31Module ComponentsAdd to cartDescriptionAC 80-300V/30-70HZ 3in1 LCD Time Voltage Frequency Combo Meter For GeneratorVoltage and frequency can easily determine accurate display.Equipment long life, with power outage to save the cumulative time, can be stored for up to 20 years.SpecificationResolution:1VDisplay mode:LCDResolution:0.1hzWorking voltage:single phase:AC 80-300VFrequency measurement range:30-70HzWorking conditions temperature:-20 – 70→Working life:More than two yearsApplicationVoltage monitor, Generator Sets, industrial control …
AC 80-300V 3in1 LCD Time Voltage Frequency Combo Meter for GeneratorRead More
LCR-T4 Transparent Plastic Shell Clear Protective Case for Graphical Transistor LCR Tester Multifunctional Transistor Tester
$7.01Module ComponentsAdd to cartFeatureNet weight:93.6gSize:11.3*8.7*1.7cmNote:For LCR-T4 Graphical Transistor LCR Tester only (Product ID:1311439)The Tester is not includes.Package includes1 x LCR-T4 Transparent Plastic Shell kit
Reviews
There are no reviews yet.