TAS5630 Power Amplifier Board High-power Mono 600W Bass Subwoofer Power Amplifier Board
$92.58
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The TAS5630 class D amplifier can drive 600W output power under a DC48V 2 ohm load, 350W output power at a 4 ohm load. They use PurePathTM HD technology and TI’s advanced closed-loop architecture to enable next-generation home theater systems, stand-alone High-definition media playback and ultra-low distortion in home theaters, professional audio systems. Is the current top digital amplifier
This is a flagship digital amplifier. Its analytical power and details are all extreme. Its driving force is very powerful and its power consumption is very low.
The board DC input voltage is DC 18V to DC 50V. The recommended range is 24-45V. The current is more than 6A (the bigger the better), the transformer plus rectifier bridge filter can also be used. The transformer is within 15V-33V.
Input signal can be left or right 2 input or only mono input.
The board material is very professional, red ring low-loss fever inductance, Japan ALPS16 potentiometer, large-scale aluminum alloy heat dissipation system, Japan chemical black diamond decoupling capacitor, etc.
Parameter
DC=50V
R=2┯, P=600W when THD+N=10%
R=4┯, P=350W when THD+N=10%
DC=50V, R=6┯, P=250W when THD+N=10%
DC=50V, R=8┯, THD+N=10%, P=200W
Total Harmonic Distortion (THD+N)
Signal to Noise Ratio (SNR):>100dB
Input impedance:20K┯
Output offset voltage
Voltage gain:adjustable
Conversion Rate (SR):50V/us
Frequency Response Range:20Hz–20kHz
Power supply range:DC20–DC50V
PCB size:111.6*103.5MM
Frequency division point:60HZ
Weight:230g
Use note
The board is a DC power supply, do not directly input AC, use AC transformer, plug a rectifier bridge and filter capacitor. In addition, the DC power supply should not exceed 50V and it should not be lower than 20V. If it is less than 20V, it will not start. In addition, there is a relationship between the output power and the power of the power supply. The 50V power will be 4 times larger than the power at 20V.
Package included
1 x Amplifier Board
Weight | 0.23 kg |
---|
Customers Also Viewed
5pcs 1206B 3A PWM DC Motor Speed Controller 6V/12V/24V Speed Regulating Switch Electronic Governor Dimmer
$39.45Motor PWM Speed ControllerAdd to cartDescriptionModel:1206BKVoltage:12VPower mode:DC powerVoltage range:DC 6V-28VCurrent range:Within 3ASwitch function:YesSize:57mm*37mmPackage Included5 x Motor Speed Governor
100W 18V High Efficieny Solar Panel USB DC Monocrystalline Solar Charger for Car RV Boat Battery Charger Waterproof
$105.29Solar PanelAdd to cartFeature– Suitable for campers, boats, houses, gardens, shacks or farms– Provide appropriate power for TVs, laptops, lights, refrigerators and other operating equipment.– Flexible board, lightweight and easy to install.– Suitable for RVs, boats, small spaces or crowded areas.SpecificationSolar panelMaterial:Monocrystalline SiliconSize:510x280x3.0mm/20.08×11.02×0.12inPower:100WOpen Circuit Voltage:18VShort circuit current:2AOutput Voltage:DC 18V&9V, USB 5V, Type-C 5VWaterproof grade:IP65Conversion:23-24%Applicable to:Bicycle, mountaineering, hiking, camping, …
CJMCU-219 INA219 I2C Bi-directional Current Power Monitor Sensor Module
$13.11Sensor & Detector ModuleAdd to cartDescriptionCJMCU-219 module is a with I2C interface Bidirectional current / power monitor integrated circuit (IC), and further expand the energy-saving electronic products TI camp. INA219 with the industry’s highest accuracy and smallest size, not only to monitor the voltage drop across a shunt resistor on the sensing shunt supply voltage, while also computing power. The …
CJMCU-219 INA219 I2C Bi-directional Current Power Monitor Sensor ModuleRead More
Reviews
There are no reviews yet.