50pcs IR infrared Obstacle Avoidance Sensor Module for Smart Car Robot 3-wire Reflective Photoelectric for
Shipping:Standard Shipping about 10-25 business days
The sensor module adaptable to ambient light, having a pair of infrared emitting and receiving tubes, transmitting tubes emit infrared certain frequency, when the direction of an obstacle is detected (reflection surface), the infrared reflected is received by the reception tube, After a comparator circuit processing, the green light is on, but the signal output interface output digital signal (a low-level signal), you can adjust the detection distance knob potentiometer, the effective distance range of 2 ~ 30cm, the working voltage of 3.3V- 5V. The detection range of the sensor can be obtained by adjusting potentiometer, with little interference, easy to assemble, easy to use features, can be widely used in robot obstacle avoidance, avoidance car, line count, and black and white line tracking and many other occasions.
1. When the module detects an obstacle in front of the signal, the green indicator lights on the board level, while the OUT port sustained low signal output, the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted clockwise adjustment potentiometer, detects the distance increases; counterclockwise adjustment potentiometer, reducing detection distance.
2. The sensor active infrared reflection detection, target reflectivity and therefore the shape is critical detection distance. Where the minimum detection distance black, white, maximum; small objects away from a small area, a large area from the Grand.
3. The sensor module output port OUT port can be directly connected to the microcontroller IO can also directly drive a 5V relay; Connection:VCC-VCC; GND-GND; OUT-IO
4. Comparators LM393, stable;
5. The module can be 3-5V DC power supply. When the power is turned on, the red power indicator lights;
6. With the screw holes 3mm, easy fixed installation;
7. Board size:3.2CM * 1.4CM
8. Each module has been shipped threshold comparator voltage adjusted by potentiometer good, non-special case, do not adjustable potentiometer.
Module Interface Description
1. VCC 3.3V-5V external voltage (can be directly connected to 5v and 3.3v MCU MCU)
2. GND GND External
3. OUT small board digital output interface (0 and 1)
50 x IR Infrared Obstacle Avoidance Sensor Module
Customers Also Viewed
TT-K-36-SLE Temperature Measuring Line with Plug thermocouple Sensor Line K Type Tetrafluoride$16.19SwitchesAdd to cart
This type K thermocouple temperature line can be used for any type K imported or domestic temperature recording instrumentSpecificationName:Temperature measurement lineModel:TT-K-36-SLEDivision number:KTemperature range:-200℃~ +260℃Surface temperature tolerance range:-200℃~ +260℃K type, temperature:-200℃~260℃Insulation material:PTFECore diameter:2×0.127mmCore material:Ni-cr/ni-si alloyLead line length:500mmColor coding:Red–negative pole/ Yellow–positive poleAdapt to the thermometer modelT-DK-40T-DK-60T-DK-80T-DK-120MALCOM RCP-100RCP-300RCP-600KIC STARTKIC 2000KIC EXPLORERPackage Included1 x TT-K-36-SLE Temperature measurement line with …
Firmware PortaPack with HackRF one 1MHz-6GHz SDR Receiver Transfer AM FM SSB ADS-B SSTV Ham Radio offline GPS Simulator$404.99Test & Measuring ModuleAdd to cart
NoteExclusively write GPS simulator firmware for testing TCXO clocks (older versions of hardware are not supportedWe customize portapack source, put gpssim baseband signal file in micro sd, through portapack send to air the result is very satisfying! usage./gps-sdr-sim -e brdc3540.14n -s 2500000 -b 8 -o gpssim.c8 create text file named ‘gpssim.txt’ contextsample_rate=2500000center_frequency=1575420000 and copy this …
3Pcs Mini Ultra-small Size ESP-M3 From ESP8285 Serial Wireless WiFi Transmission Module$19.31Smart ModuleAdd to cart
Overview What is ESP8285 ESP8285=ESP8266+1M Flash, the bearing high temperature is 125→ (the one for ESP8266 is just 85→). More important, the code programmed in ESP8266 can be used for ESP8285 intactly. ESP-M3 is encapsulated by the high performance chip ESP8285, which is equal to ESP8266 chip plus 1M Flash. The chip ESP825 is encapsulated …
XH-M312 TPA3118D2 Digital Amplifier Board DC 24V HD Edition Dual Channel 2x45W Audio Power Amp Module$11.33Amplifier BoardAdd to cart
SpecificationChip type:TPA3118D2Input voltage:Recommended DC 24V (range 12-28V)Power supply interface:DC socket (5.5*2.1)Input current:3AOutput power:45W*2Output impedance:4-8 ohmsInput impedance:1K┯Signal to noise ratio:100dBMagnification:30TSPNumber of channels:Two channelsAudio input:3.5mm socket/XH2.54- 3 terminal blockProduct size:80x50x15mm/3.15×1.97×0.59inWeight:40gPackage included1 x Amplifier Board