5Pcs Geekcreit IR infrared Obstacle Avoidance Sensor Module for Smart Car Robot 3-wire Reflective Photoelectric
$5.99
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The sensor module adaptable to ambient light, having a pair of infrared emitting and receiving tubes, transmitting tubes emit infrared certain frequency, when the direction of an obstacle is detected (reflection surface), the infrared reflected is received by the reception tube, After a comparator circuit processing, the green light is on, but the signal output interface output digital signal (a low-level signal), you can adjust the detection distance knob potentiometer, the effective distance range of 2 ~ 30cm, the working voltage of 3.3V- 5V. The detection range of the sensor can be obtained by adjusting potentiometer, with little interference, easy to assemble, easy to use features, can be widely used in robot obstacle avoidance, avoidance car, line count, and black and white line tracking and many other occasions.
Parameters
1. When the module detects an obstacle in front of the signal, the green indicator lights on the board level, while the OUT port sustained low signal output, the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted clockwise adjustment potentiometer, detects the distance increases; counterclockwise adjustment potentiometer, reducing detection distance.
2. The sensor active infrared reflection detection, target reflectivity and therefore the shape is critical detection distance. Where the minimum detection distance black, white, maximum; small objects away from a small area, a large area from the Grand.
3. The sensor module output port OUT port can be directly connected to the microcontroller IO can also directly drive a 5V relay; Connection:VCC-VCC; GND-GND; OUT-IO
4. Comparators LM393, stable;
5. The module can be 3-5V DC power supply. When the power is turned on, the red power indicator lights;
6. With the screw holes 3mm, easy fixed installation;
7. Board size:3.2CM * 1.4CM
8. Each module has been shipped threshold comparator voltage adjusted by potentiometer good, non-special case, do not adjustable potentiometer.
Module Interface Description
1. VCC 3.3V-5V external voltage (can be directly connected to 5v and 3.3v MCU MCU)
2. GND GND External
3. OUT small board digital output interface (0 and 1)
Package includes
5 x IR Infrared Obstacle Avoidance Sensor Module
Weight | 0.025 kg |
---|
Customers Also Viewed
OPEN-SMART DC Jack Power 7~12V to DC5V/3.3V Step Down Converter Voltage Regulator Power Supply Module for Breadboad
$6.55Power Supply ModuleAdd to cartDescriptionThis is a mini LDO step-down power module based on AMS1117-5.0 and AMS1117-3.3, and it output fixed 5V / 3.3V.It is a small size, lightweight, especially for model airplanes, smart cars, DIY and other items, PCB experiment board project design, breadboard project design.Features– Module type:LDO step-down module;– Onboard 500mA resettable fuse to protect the power …
Temperature Alarm Kit thermistor Electronic Teaching Experiment Training Welding DIY Parts
$5.45DIY Electronic KitsAdd to cartFeatureSize:5.8*3.7cm Power supply voltage:DC 5VFunction introductionRP1, R1, R2, R3 and RT in the circuit form a temperature measuring bridge. When the temperature is below the preset temperature, the potential of pin 2 of UA741 is higher than that of pin 3, pin 6 of 741 outputs a low level, LED1 is on, and the buzzer …
Temperature Alarm Kit thermistor Electronic Teaching Experiment Training Welding DIY PartsRead More
5pcs ESP8266 ESP-01 ESP-01S DHT11 Sensor Temperature and Humidity WiFi Node Module
$18.41Smart ModuleAdd to cartFeatureThis module is mainly controlled by ESP8266-01/ESP-01S, and DHT11 is a temperature and humidity sensor. The temperature and humidity in the ESP8266 acquisition environment are uploaded to the server. Support 3.7v-12V DC power supply (3.7V lithium battery). Can be used as a temperature and humidity collection node for smart home or IOT projects.CharacteristicMaster:ESP-01/ESP-01S (This module …
5pcs ESP8266 ESP-01 ESP-01S DHT11 Sensor Temperature and Humidity WiFi Node ModuleRead More
2Pcs/Pack Plastic Tire Wheel with DC 3-6v Gear Motor for Smart Car
$13.93Smart Robot & Solar PanelAdd to cartSpecificationMotor1. Voltage:DC 3V-6V2. Current:100 MA-120MA3. Reduction rate:48:14. RPM (With tire):100-2405. Tire Diameter:65mm6. Car Speed(M/minute):20-487. Motor Weight (g):29/each8. Motor Size:70mm X 22mm X 18mm9. NoiseTire Parameter1. Center hole:5.3MM x 3.66MM2. Wheel size:65 x 26mmPackage Included2 x Smart Car Robot Plastic Tire Wheel2 x DC Gear Motor
ACS714 5A 5V Current Sensor Breakout Board Isolate Filter Resistance Capacitor Hall Effect Module
$16.23Sensor & Detector ModuleAdd to cartIntroductionThis current sensor is a carrier board or breakout board for Allegro’s ACS715LLCTR-30A-T Hall effect-based linear current sensor, The sensor operates at 5 V and has an output sensitivity of 133 mV/A. The board ships fully populated with its SMD components.FeatureDesigned for unidirectional input current from 0 to 5 A, but the sensor will provide …
SPI MCP2515 EF02037 CAN BUS Shield Development Board High Speed Communication Module
$21.86Motherboard & Development BoardAdd to cartIntroduction CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability. It is commonly found on modern machine tools and as an automotive diagnostic bus. This CAN-BUS Shield adopts MCP2515 CAN Bus controller with SPI interface and MCP2551 CAN transceiver to give your /Seeeduino CAN-BUS capibility. With …
SPI MCP2515 EF02037 CAN BUS Shield Development Board High Speed Communication ModuleRead More
Reviews
There are no reviews yet.