10Pcs Geekcreit IR infrared Obstacle Avoidance Sensor Module for Smart Car Robot 3-wire Reflective Photoelectric
$10.17
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The sensor module adaptable to ambient light, having a pair of infrared emitting and receiving tubes, transmitting tubes emit infrared certain frequency, when the direction of an obstacle is detected (reflection surface), the infrared reflected is received by the reception tube, After a comparator circuit processing, the green light is on, but the signal output interface output digital signal (a low-level signal), you can adjust the detection distance knob potentiometer, the effective distance range of 2 ~ 30cm, the working voltage of 3.3V- 5V. The detection range of the sensor can be obtained by adjusting potentiometer, with little interference, easy to assemble, easy to use features, can be widely used in robot obstacle avoidance, avoidance car, line count, and black and white line tracking and many other occasions.
Parameters
1. When the module detects an obstacle in front of the signal, the green indicator lights on the board level, while the OUT port sustained low signal output, the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted clockwise adjustment potentiometer, detects the distance increases; counterclockwise adjustment potentiometer, reducing detection distance.
2. The sensor active infrared reflection detection, target reflectivity and therefore the shape is critical detection distance. Where the minimum detection distance black, white, maximum; small objects away from a small area, a large area from the Grand.
3. The sensor module output port OUT port can be directly connected to the microcontroller IO can also directly drive a 5V relay; Connection:VCC-VCC; GND-GND; OUT-IO
4. Comparators LM393, stable;
5. The module can be 3-5V DC power supply. When the power is turned on, the red power indicator lights;
6. With the screw holes 3mm, easy fixed installation;
7. Board size:3.2CM * 1.4CM
8. Each module has been shipped threshold comparator voltage adjusted by potentiometer good, non-special case, do not adjustable potentiometer.
Module Interface Description
1. VCC 3.3V-5V external voltage (can be directly connected to 5v and 3.3v MCU MCU)
2. GND GND External
3. OUT small board digital output interface (0 and 1)
Package includes
10 x IR Infrared Obstacle Avoidance Sensor Module
Weight | 0.05 kg |
---|
Customers Also Viewed
5Pcs GY-291 ADXL345 3-Axis Tilt Digital Gravity Acceleration Sensor Module for
$18.58Sensor & Detector ModuleAdd to cartFeatureAdxl345 digital three-axis acceleration of gravity tilt module Ar code iic / spiName:three-axis acceleration of gravity moduleChip:the adxl345Power supply:3-5VCommunication:the IIC / SPI communication protocolMeasuring range:± 2g ± 16gSchematics, manuals and reference documentation of relevant data51, the avr, the Ar microcontroller test code3-axis, ± 2g / ± 4g / ± 8g / ± 16gPackage includes5 x …
5Pcs GY-291 ADXL345 3-Axis Tilt Digital Gravity Acceleration Sensor Module forRead More
10pcs DC-DC 5-32V to 0.8-30V Power Supply Step Down Module Adjustable Buck Regulator 5A Constant LED Driver Battery Charging Voltage Board
$47.05Power Supply ModuleAdd to cartOverviewThe module uses high-quality chips, high efficiency (up to 95%), low heat generation, maximum 5A current, and TI’s op-amp control output current, making the overall output very stable.This module uses a low-ESR filter capacitor to reduce ripple voltage to 50mV!FeaturesModule nature:non-isolated buck moduleRectification mode:asynchronous rectificationWiring port:Input mode:IN+ input positive, IN- input negativeOutput mode:OUT+ output positive, …
5pcs 2 in 1 8W 3-24V to 24V Boost-Buck Dual Voltage Power Supply Module for ADC DAC LCD OP-AMP Speaker
$43.70Power Supply ModuleAdd to cartDescriptionInput voltage:3~24V, output:±24VMaximum output power:1-8W (For details, please see the description at the bottom or ask us for information.)Conversion efficiency:70-90%Quiescent current:3-4mAAccuracy:Positive voltage ±3%, Negative voltage ±5%8W DC-DC Boost-Buck Converter working frequency:400KHZ. Operating ambient temperature:-40~+85 Degrees CelsiusSize:42 x 24 x 15mmWeight:10gFeatureHigh efficiency up to 90%Built-in Frequency CompensationBuilt-in Soft-Start FunctionBuilt-in Thermal Shutdown FunctionBuilt-in Current Limit FunctionNote1. In …
LILYGO T-FH Female Header interface Gesture Sensor Module I2C for T-WATCH TTV T-Higrow
$9.06Sensor & Detector ModuleAdd to cartGithub Link:Click here to openProducts that can be used withT-WATCH SeriesT-Watch Upgraded Version Black Product ID 1551855 T-Watch Upgraded Version White Product ID 1551854 T-Watch Basic Version Product ID 1501125 T-Watch Basic Version with Silicone Shell Product ID 1722494 TTV:Product ID 1777327 T-Higrow:Product ID IntroductionThe LILYGO T-FH interface sensor is the abbreviation of female header. …
LILYGO T-FH Female Header interface Gesture Sensor Module I2C for T-WATCH TTV T-HigrowRead More
10pairs MC4 Connector+1pair Spanner Male Female 30A Cable Plug MC4 Connector Solar Panel Branch Series Connect Solar System
$28.42Electronic Accessories & SuppliesAdd to cartDescriptionItem no:MC4Rated voltage:1000 VRated impulse voltage:1000 VRated current:24A – 14 AWG (2.5mm2;), 30A – 12 & 10 AWG (4mm2; & 6mm2😉Test voltage:6 kV (50 Hz)Protection grade:IP67Insulation material:PC/PAContact material:Copper, silver-platedOperating temperature:-40°C ~ +90°CSafety class:IIFlame class:UL94-V0Contact resistance:≤5mΩInsertion / Withdrawal force:≤50N / ≥50NSuitable for cables:10, 12, 14 AWG (2.5mm2/4mm2/6mm2😉Locking system:Snap-inPackage included10pairs x MC4 Connectors1pair x MC4 Spanner
10Pcs 1 Key Press Film Switch Module Single Chip Microcomputer Extended Keyboard Electronic Switch Module
$12.56Other Module BoardAdd to cartSpecificationsProduct thickness:1.00mm (+0.02mm)Panel material:PCBack adhesive tape:white glueButton strength:280gTemperature:-15 ° C / +65 ° CCircuit material:0.125mm PET transparentButton package type:button planeButton package height:0.3mmKey life:>100,000 timesLoop resistanceConnector:2.54mm square hole with protective coverSize:23*20mmPackage Included10 x 1 Key Press Film Switch
Reviews
There are no reviews yet.