Geekcreit IR infrared Obstacle Avoidance Sensor Module for Smart Car Robot 3-wire Reflective Photoelectric
$4.36
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The sensor module adaptable to ambient light, having a pair of infrared emitting and receiving tubes, transmitting tubes emit infrared certain frequency, when the direction of an obstacle is detected (reflection surface), the infrared reflected is received by the reception tube, After a comparator circuit processing, the green light is on, but the signal output interface output digital signal (a low-level signal), you can adjust the detection distance knob potentiometer, the effective distance range of 2 ~ 30cm, the working voltage of 3.3V- 5V. The detection range of the sensor can be obtained by adjusting potentiometer, with little interference, easy to assemble, easy to use features, can be widely used in robot obstacle avoidance, avoidance car, line count, and black and white line tracking and many other occasions.
Parameters
1. When the module detects an obstacle in front of the signal, the green indicator lights on the board level, while the OUT port sustained low signal output, the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted clockwise adjustment potentiometer, detects the distance increases; counterclockwise adjustment potentiometer, reducing detection distance.
2. The sensor active infrared reflection detection, target reflectivity and therefore the shape is critical detection distance. Where the minimum detection distance black, white, maximum; small objects away from a small area, a large area from the Grand.
3. The sensor module output port OUT port can be directly connected to the microcontroller IO can also directly drive a 5V relay; Connection:VCC-VCC; GND-GND; OUT-IO
4. Comparators LM393, stable;
5. The module can be 3-5V DC power supply. When the power is turned on, the red power indicator lights;
6. With the screw holes 3mm, easy fixed installation;
7. Board size:3.2CM * 1.4CM
8. Each module has been shipped threshold comparator voltage adjusted by potentiometer good, non-special case, do not adjustable potentiometer.
Module Interface Description
1. VCC 3.3V-5V external voltage (can be directly connected to 5v and 3.3v MCU MCU)
2. GND GND External
3. OUT small board digital output interface (0 and 1)
Package includes
1 x IR Infrared Obstacle Avoidance Sensor Module
Weight | 0.005 kg |
---|
Customers Also Viewed
Cross-Section of Geometric Solids Exploring Geometry Manipulatives Mathematics Game Toys
$16.19MathematicsAdd to cartSpecificationMaterial:PlasticColor:Random ColorWeight:90gCube:(L*W*H) approx 4*4*4cm/ 1.57*1.57*1.57 inchCylinder A:(Dia*H) approx 3*3*6cm/ 1.18*1.18*2.36 inchCone:(Dia*H) approx 3*3*5cm/ 1.18*1.18*1.96 inchSphere:(Dia) approx 3cm/ 1.18 inchFeatures1.Shapes including cubes, cylinders, pyramid, sphere, cone, and various Cross-sections model.2.Cross-section of Geometric Solids Experiment set, kids math geometry manipulatives.3.Explore shape, size, pattern, volume and measurement with these invaluable hands-on tools.4.Opened and clear plastic geometric solids, easily …
Cross-Section of Geometric Solids Exploring Geometry Manipulatives Mathematics Game ToysRead More
2Pcs 20W 16V 1.25A Monocrystalline Silicon Rear Junction Box Solar Panel + 4 x Spring + Cables
$107.51Smart Robot & Solar PanelAdd to cartFeatures– The two pieces of the product are connected in parallel. Spring connection, support multiple pieces of DIY parallel connection. Mounting holes are provided on each solar panel.– Suitable for 12V batteries. Support 12V output, suitable for 12V battery charging.– High efficiency, conversion rate of 19-20%– Flexible, suitable for surface mountingSpecificationsType:Flexible solar panelMaterial:Monocrystalline siliconExpand:420*385*2.5mmFolding:420x190x2.5mmWorking temperature:-40° …
3pcs D1 Mini Lite V1.0.0 WIFI internet of Things Development Board Based ESP8285 1MB FLASH
$23.13Smart ModuleAdd to cartFeatures11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)1 analog input(3.2V max input)a Micro USB connectionCompatible with 1MB Flash500mA resettable fusePackage included3 x WEMOS D1 mini Lite3 x 2pcs Normal pin
3pcs 315MHZ Wireless Transmitter Receiving Module ASK DC 9V-12V EV1527 Remote Control Switch Board
$11.69Smart ModuleAdd to cartTechnical requestProduct model:ZF-2 (with code)Transmission frequency:315MHZWorking voltage:DC 9V ~12VModulation method:ASKQuiescent current:0uAWorking current:8~10mACoding type:learning code (EV1527)Radiated power:10~15mWShooting distance:100-200 meters (receiver sensitivity -108dBm)Volume:26.3mm*23.3mm*9mmPIN:NAME:Function1:ANT:RF signal input pin, this pin needs to be connected to the antenna2:12V-:DC power supply negative input pin3:12V+:DC power supply positive input pinRated parameter:Symbol:ValueDC power supply:VDD-VSS:9V-12VStorage temperature range (TS):TSTG:-12°C to 75°CWelding temperature:+260°CPackage includes3 x Receiving …
5Pcs Geekcreit ESP8266 ESP-01 ESP-01S WS2812 RGB LED Lamp Module Support for IDE Programming
$11.37Expansion Board & ShieldAdd to cartFeatureThis is a WS2812 RGB LED control module based on ESP-01 / 01S. With it, you can easily control the WS2812 light bar / light ring. DIY own lighting control system. Support for Ard uino IDE programming.Characteristic* Master:ESP-01 / ESP-01S (This module does not include ESP-01 / ESP-01S)* Control Pin:GPIO2* Interface:3Pin PH2.0 connector* Operating Voltage:DC …
DD30CRTA 3A 12V 1-1000AH Lead-Acid Battery Accumulator Storage Cell Charger Charging for UPS Car Solar Motorcycles Electric Vehicles
$15.30Power Supply ModuleAdd to cartSpecificationsPower supply voltage:15-28VDC(Recommended 16-25VDC)Over Charge Voltage is 14.8VFloat Charge Voltage is 13.55VMaximum charge current:3AQuiescent current:about 1.8mAHigh PWM Switching Frequency:300KHzOperating Ambient Temperature:-40→ to +85→Size:66 x 20x 12mmWeight:9gApplicationsCar battery chargingSolar battery chargingMobile LoadspeakerLead-Acid Battery ChargerElectric Bicycle ChargerUPS Portable Industrial and Medical EquipmentStandalone Battery ChargersFeaturesFixed Over-Charge VoltageOvercurrent protectionAutomatic Conditioning of Deeply Discharged BatteriesAutomatic RechargeCharger Status IndicationBattery Overvoltage ProtectionSuitable …
Reviews
There are no reviews yet.